Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,230 Commits 70 Branches 507 Tags 619 MiB
Commit Graph

4230 Commits

Author SHA1 Message Date
Robert Lefebvre 4e4ff84cf1 Updates to CopterLEDS 
Creation of Nav Blink Function.
 2012-05-22 09:58:37 -04:00
Andrew Tridgell 6945be0ca8 autotest: default to not using gdb on ArduPlane.elf 2012-05-22 20:02:23 +10:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE 
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
 2012-05-22 20:02:23 +10:00
Andrew Tridgell 8e01bc3593 MAVlink: update ArduPlane for param fetch during DataFlash erase 
same changes as for ArduCopter
 2012-05-22 16:13:35 +10:00
Andrew Tridgell 422dc82f32 MAVLink: allow parameter fetch during mavlink_delay() 
this allows the planner to fully connect to the APM with MAVLink while
doing a DataFlash erase
 2012-05-22 16:13:35 +10:00
Jason Short 1b9f34e4e0 Flip.pde: renamed dcm to ahrs 2012-05-21 12:58:51 -07:00
Jason Short 5407acdb4c Some bug fixes to Auto-flip. I ran this code through the sim and found these flaws. 2012-05-21 11:07:41 -07:00
Jason Short f6d8a18182 Added note 2012-05-21 09:58:23 -07:00
Jason Short 1a5e2f4e37 Attitude.pde - Removed rate limit based on SIM flights. These should never have been in place and seriously detriment Acro flight. 2012-05-21 09:58:23 -07:00
Andrew Tridgell f274df454a DCM: fixed a bug when using GPS for yaw correction 
When using GPS for yaw correction we need to apply the x and y omegaI
corrections from the _omega_I_sum in the period before we get to the
minimum ground speed for GPS yaw correction. Otherwise we get a large
sudden omega_I change on takeoff.
 2012-05-21 12:15:06 +10:00
Jean-Louis Naudin 84c5a392da APMrover v2.1.6a - small update for LITE version 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-20 17:45:07 +02:00
Michael Oborne 6d24f5efb2 APM Planner 1.1.87 
add popouts in config/setup
add more text to hud heading nw,ne,sw,se
add 5 m filter to antenna tracker
add refresh param buttons
remove the word old, as people still want it.
modify telem playback interface with slider bars
add posible fix to bad grid spacing
move mavlink code.
 2012-05-20 14:47:20 +08:00
Jason Short 8d075015e1 added check for duplicate time-stamped GPS messages. 2012-05-18 09:54:18 -07:00
Andrew Tridgell 251fe26875 GPS: added ublox build target 
useful for 1280 APM1s
 2012-05-18 22:31:50 +10:00
Jason Short 9732b7d2dc navigation.pde: 
removed unneeded WP_Distance check
remove unneeded return for Navigate
removed unneeded rate_D calcs
removed unused functions
 2012-05-17 11:05:05 -07:00
Jason Short 7e190c6f5c Arducopter.pde : 
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
 2012-05-17 11:05:05 -07:00
Jean-Louis Naudin 408d3dfa98 APMrover v2.1.6 - Added Speed Booster between wp and soft start 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-17 18:42:16 +02:00
Andrew Tridgell 9d221b3625 AP_Common: fixed some duplicate product ID warnings 2012-05-17 23:37:32 +10:00
Michael Oborne c530704973 APM Planner 1.1.86 
add ArduRover
simplify connect
modify hardware screen
fix mono terminal issue
modify 3drradio screen
modify updater
 2012-05-16 20:21:27 +08:00
Michael Oborne 6a6c8eb708 change rover id to mav_ground 2012-05-16 18:06:40 +08:00
Jason Short d1cd04486a removed retro loiter code since Angel has a branch now. 
shrank speed filter to avoid latency
removed unused forward estimator code

placed code for switchover to gps.groundspeed at 1.5m/s

added clamp for D term when below .5m/s to eliminate noise

added hybrid I-term based on speed error and position

changes Loiter D term to use position rather than acceleration to avoid noise
 2012-05-15 22:14:23 -07:00
Jason Short 7f3e142fa8 Loiter Gains based on new SIM 2012-05-15 22:01:01 -07:00
Robert Lefebvre c5f7b2fff2 Fixed Syntax error. 2012-05-15 12:35:35 -04:00
Robert Lefebvre c8fb9a6635 More CopterLEDS changes. 
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2.  Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2.  Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code.  Legacy users should see no difference.
 2012-05-15 12:00:21 -04:00
Robert Lefebvre a285e2779f CopterLEDS changes for APM2 2012-05-15 10:07:03 -04:00
Hazy d41001ec1e APM Planner - a few translate 2012-05-15 20:40:04 +08:00
Jean-Louis Naudin 01c4f6105b APMrover 2.1.4 - cosmetic changes 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-15 08:00:36 +02:00
Michael Oborne e8e2d7075b firmware build 2012-05-15 09:55:09 +08:00
Robert Lefebvre 10b5d758f8 Changed software ID from 0 to 20 for ArduRover V2 Divergence. 
Also changed definition of flight mode 2 from Stabilize to Learning.
 2012-05-14 15:21:29 -04:00
Jean-Louis Naudin 5cece403a5 APMrover v2.1.4: compatibility with the latest version of mavlink library... 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-14 20:33:03 +02:00
Jean-Louis Naudin 4a4402556b APMrover v2.1.3 : 
Added option (hold roll to full right + SW7 ON/OFF) to init_home during the wp_list reset
Add ROV_SONAR_TRIG (default = 200 cm) - tested by Franco
Restart_nav() added and heading bug correction, tested OK in the field
RTL then stop update - Tested OK in the field
Added SONAR detection for obstacle avoidance

Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-14 17:47:08 +02:00
Michael Oborne f4975cb7fe firmware build 2012-05-14 15:15:08 +08:00
Michael Oborne 854b2a6f9b firmware build 2012-05-14 12:38:19 +08:00
Michael Oborne 716be4f511 firmware build 2012-05-14 12:35:20 +08:00
Andrew Tridgell 3ae1c6f9e0 APM: prepare for 2.34 2012-05-14 14:29:59 +10:00
Michael Oborne a0394c8b68 APM Planner 1.1.85 
work on opengltest
fix last missing param
fix com port selection on connecting to bad comport
add convert to csv. entire log
add log caching to image georef. for tlog and logs
add srtm data caching
 2012-05-13 18:56:42 +08:00
rmackay9 357d6c2d9b ArduCopter: bug fix for reversing tri servo 
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
 2012-05-13 12:36:46 +09:00
rmackay9 2f74004fcb ArduCopter: updated version to 2.5.5 2012-05-13 08:47:43 +09:00
Michael Oborne 4fc61505df APM Planner 1.1.84 
3dr radio fix's + rfd900
other misc fixs
 2012-05-11 17:10:08 +08:00
Craig Elder 69bf5700cd IMU: expose IMU_PRODUCT_ID as EEPROM Variable 
this will allow us to log the Product ID in tlogs
 2012-05-09 18:30:36 -07:00
Craig Elder 4a1d8b0875 AP_InertialSensor: Return product ID from sensor initialization 
this exposes the product ID to the IMU Layer
 2012-05-09 18:30:36 -07:00
Craig Elder 4c46955612 PRODUCT: Define product IDs for all supported products 2012-05-09 18:30:36 -07:00
Craig Elder ed99940bee MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D 
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
 2012-05-09 18:30:35 -07:00
Jean-Louis Naudin 899e6e66b0 APMrover v2.0c - tested with APM v2 full kit (Oilpan) - dualversion (IMUless + IMUfull) 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-09 07:12:26 +02:00
Andrew Tridgell 46ee92441e HILTest is not needed any more 2012-05-09 13:47:44 +10:00
Michael Oborne db2416d045 APM Planner 1.1.83 
fix null exception. if connect and not view the link stats, an exception is thrown on disconnect.
 2012-05-08 22:37:54 +08:00
Michael Oborne c01626818b APM Planner 1.1.82 
modify 3dr radio packet size 64 > 32
add andrews link status Mod - thanks
add hw voltage to status
add generic logbrowse pid class "pid-*" > "pid-1"
 2012-05-08 21:21:19 +08:00
Michael Oborne f56d3afccf APM Planner 1.1.81 
mavlink 1.0 fixs
simulation hil fix for lorenz
modify default att rate to 10 hz
 2012-05-07 22:28:40 +08:00
Chris Anderson 34f5923ef3 fixed typo ("minimum" should have been "maximum") 2012-05-06 15:50:19 -07:00
Michael Oborne 218e70cd8b AP - fix attitude level hil mavlink 1.0 issue 2012-05-06 11:05:35 +08:00