Commit Graph

57 Commits

Author SHA1 Message Date
murata e007b21f9e AP_HAL_ChibiOS: Console output can be disabled 2022-05-17 09:53:06 +10:00
Andrew Tridgell 638e20a0b9 HAL_ChibiOS: bring in hal.h where it is needed 2022-02-22 12:13:19 +11:00
Nathan Costa 9f7aa715b1 AP_HAL_ChibiOS: add support for CAN/I2C switch 2022-02-16 13:25:58 +11:00
Andrew Tridgell e6aae3caf6 HAL_ChibiOS: fix G4 I2c bus speeds 2021-10-12 10:54:07 +11:00
Andrew Tridgell 0212e23cd3 HAL_ChibiOS: added support for STM32L496 MCUs
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
Andrew Tridgell 4fce1ae092 HAL_ChibiOS: added G491 support 2021-07-30 10:20:52 +10:00
Andrew Tridgell 4d661911e5 HAL_ChibiOS: allow adjustment of F7 I2C timing
needed for F732
2021-05-09 06:44:19 +10:00
Andrew Tridgell 46976c4358 HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG
when a peripheral is made available via BRD_ALT_CONFIG we need to
remap the existing ioline_t in the UART and I2C drivers to use the new
pin.

This fixes an issue with half-duplex, inverted, swapped UART pins for
protocols like FPort and FPort2
2020-10-28 19:51:45 +11:00
Peter Barker 48da4e523c AP_HAL_ChibiOS: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Andrew Tridgell 56985f8c33 HAL_ChibiOS: added checking on bouncebuffer allocation
fail operations if DMA bouncebuffer alloc fails
2020-01-18 07:13:11 +11:00
Andrew Tridgell f68b9bafd8 HAL_ChibiOS: fixed H7 I2C timing
we were running the clock at too low speed. This affected the SSD1306 display
2019-12-30 16:10:44 +11:00
Andrew Tridgell bc1de7a208 HAL_ChibiOS: support STM32F3xx MCUs 2019-11-01 10:53:53 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv)
MAX() is right for SPI, not I2C
2019-08-26 09:13:39 +10:00
Andrew Tridgell 578e5dfdaa HAL_ChibiOS: add up i2c ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell f8cfbb8062 HAL_ChibiOS: added ISR limit on I2C
this will prevent any possibility of an I2C interrupt storm. This is
designed to address the most likely cause of #11642
2019-08-25 17:12:16 +10:00
Lucas De Marchi e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
2019-06-06 09:27:47 -07:00
Andrew Tridgell 59678840a8 HAL_ChibiOS: log SPI and I2C counters 2019-05-17 08:56:06 +10:00
Andrew Tridgell d9c888ab45 HAL_ChibiOS: port SPI, I2C and UART drivers to H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell adf7fefc2e HAL_ChibiOS: detect stuck I2C bus and clear with SCL
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
2018-11-16 08:30:40 +11:00
Andrew Tridgell d3af854949 HAL_ChibiOS: fixed bootloader build 2018-08-16 12:40:10 +10:00
Lucas De Marchi 668c941717 Global: use new version of ARRAY_SIZE 2018-08-04 15:31:55 +10:00
Siddharth Purohit 395c48933c HAL_ChibiOS: move tto using updated time conversion API 2018-08-03 13:44:59 +10:00
Andrew Tridgell 13f96bcb00 HAL_ChibiOS: fixed an i2c dma callback bug
many thanks to Kelly-Foster for chasing me on this one!
2018-08-02 12:29:02 +10:00
Andrew Tridgell 73cfd40e7f HAL_ChibiOS: reduce latency of DMA sharing
if we are sharing a DMA channel between i2c and SPI then this saves
latency on SPI by giving up the DMA channel between retries
2018-07-20 14:51:18 +10:00
Andrew Tridgell 59aab9987e HAL_ChibiOS: account for I2C base in compass masks 2018-07-18 12:04:01 +10:00
Andrew Tridgell 476bddd9a3 HAL_ChibiOS: use HAL_I2C_INTERNAL_MASK 2018-07-14 17:51:50 +10:00
Andrew Tridgell 4f9bd50038 HAL_ChibiOS: implement I2C bus masks 2018-07-10 15:39:47 +10:00
Andrew Tridgell e068106669 HAL_ChibiOS: support I2C devices on STM32F7 without DMA
this allows us to support I2C4 on fmuv5
2018-06-13 20:05:26 +10:00
Andrew Tridgell a945c97ec6 HAL_ChibiOS: fixed 3-way DMA sharing bug
when we have 3 way contention across two DMA streams we could get the
dma_deallocate function called in an object from two places at
once. This adds a mutex that prevents that scenario
2018-06-06 07:15:41 +10:00
Andrew Tridgell 2493cdbcb6 HAL_ChibiOS: switch to new bouncebuffer system
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell fef1b0ffc6 HAL_ChibiOS: fixed I2C flush/invalidate calls 2018-06-06 07:15:41 +10:00
Andrew Tridgell 4d4ea894e8 HAL_ChibiOS: disable i2c device debug code 2018-06-06 07:15:41 +10:00
Andrew Tridgell edb831653f HAL_ChibiOS: added dma_flush and dma_invalidate operations
these are needed to manage the data cache on the STM32F7
2018-06-06 07:15:41 +10:00
mirkix c2eee2db23 AP_HAL_ChibiOS: add STM32F7 I2C support 2018-04-29 07:59:52 +10:00
Andrew Tridgell bc32276966 HAL_ChibiOS: support DShot output
use DMAR burst DMA to minimise number of DMA channels needed

thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell 306d35655e HAL_ChibiOS: allow for bare board builds
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
2018-03-02 12:52:50 +11:00
Andrew Tridgell 5f353b5c85 HAL_ChibiOS: fixed build of I2C without I2C1 defined 2018-03-02 12:52:50 +11:00
Andrew Tridgell 9301e4888a HAL_ChibiOS: make not having bus lock a soft error
this is nicer for driver developers
2018-02-09 10:14:49 +11:00
Andrew Tridgell 8eff43a352 HAL_ChibiOS: fixed printf arguments 2018-02-08 17:36:33 +11:00
Siddharth Purohit 40142e5aef ChibiOS: implement way to clear i2c bus by toggling clock line 2018-02-08 17:36:33 +11:00
Andrew Tridgell 47ce37f463 HAL_ChibiOS: report I2C clock downgrades 2018-02-08 17:36:33 +11:00
Andrew Tridgell f1ce321a2f HAL_ChibiOS: added checking of bus owner
this ensures all bus transfers are only done by the thread that owns
the semaphore
2018-02-07 20:33:45 +11:00
Andrew Tridgell 23e1b2e271 HAL_ChibiOS: added paranoid state checking on I2C
this is here just while debugging an issue with Mark
2018-02-07 20:33:45 +11:00
Andrew Tridgell 87389e0fdc HAL_ChibiOS: fixed double DMA allocation on i2c 2018-02-07 20:33:45 +11:00
Andrew Tridgell 63671b06a8 HAL_ChibiOS: added HAL_I2C_MAX_CLOCK define 2018-01-20 17:40:07 +11:00
Andrew Tridgell 88f11f5a50 HAL_ChibiOS: added HAL_I2C_BUS_BASE
this allows fmuv4 to start at bus 1
2018-01-20 17:40:07 +11:00
Andrew Tridgell f5c8754d75 HAL_ChibiOS: use ARRAY_SIZE_SIMPLE
this allows for boards without a device type (eg. no SPI bus)
2018-01-15 11:46:02 +11:00