Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
61,861 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

35181 Commits

Author SHA1 Message Date
Andy Piper 47fe3762a0 AP_RCProtocol: add tests for CRSF and fix protocol test 
fixed RCProtocolTest on SITL and make it pass/fail with an exit code

Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
 2024-03-14 11:29:35 +11:00
rishabsingh3003 261117cd96 AC_Avoid: Remove sensor status checks 2024-03-14 11:29:35 +11:00
rishabsingh3003 7cae432014 AP_Proximity: Improve get_status handling 2024-03-14 11:29:35 +11:00
rishabsingh3003 a45b4b19fb AP_RangeFinder: move multican to AP_CANSensor 2024-03-14 11:29:35 +11:00
rishabsingh3003 3fb77c6e2f AP_Proximity: move mutlican to AP_CANSensor 2024-03-14 11:29:35 +11:00
rishabsingh3003 a1ada298e6 AP_Arming: Remove MR72 2024-03-14 11:29:35 +11:00
rishabsingh3003 73a3fdd201 AP_CANManager: Add multiCAN interface 2024-03-14 11:29:35 +11:00
rishabsingh3003 639f336d32 AP_Arming: Add check for CAN MR72 2024-03-14 11:29:35 +11:00
rishabsingh3003 4709cf9440 AP_Proximity: Add support for CAN MR72 2024-03-14 11:29:35 +11:00
rishabsingh3003 1d2aecb0ed AP_CANMangaer: Add support for CAN MR72 2024-03-14 11:29:35 +11:00
bugobliterator d76617f54c AP_GPS: broaden the acceptance criteria for GPS Yaw measurement 2024-02-14 11:20:30 +11:00
Iampete1 6be66f4010 AP_Parachute: do relay conversion if ever enabled 2024-02-14 11:20:30 +11:00
Andrew Tridgell ccaeb0fd45 HAL_ChibiOS: fixed CANFD timings (again!) 
the timing table was not correct, thanks to APD for pointing this out.

This is recalculated from
https://www.kvaser.com/support/calculators/can-fd-bit-timing-calculator,
with transmitter timing delay compensation added and tested with Salae
captures to ensure we are getting the right bit rates
 2024-02-14 11:20:30 +11:00
Andrew Tridgell c1e4332ba5 AP_Param: fixed setting of defaults for dynamic param trees 
when we load a VARPTR subtree we need to re-scan the parameter
defaults file from @ROMFS/defaults.parm in case there are defaults
applicable to this subtree
 2024-02-14 11:20:30 +11:00
yjuav bdb5352086 hwdef: add YJUAV_A6Ultra board support 2024-02-14 11:20:30 +11:00
Randy Mackay 59ce292af5 Mount: Siyi waits for non-zero cam firmware version 2024-02-14 11:20:30 +11:00
David O'Connor d7daf8d6a5 hwdef: add AnyLeaf H7 board 2024-02-14 11:20:30 +11:00
Andy Piper 019b9f5c35 AP_RCProtocol: discriminate GHST and CRSF based on first byte 
do not change to GHST baudrate unless it has been specifically configured
 2024-02-14 11:20:30 +11:00
Andrew Tridgell dcf5730561 HAL_Linux: fixed float calc of time for onboard flow 2024-02-14 11:20:30 +11:00
Andrew Tridgell 04adf7c4f0 HAL_SITL: use integer maths for clocks 
same fix as for HAL_Linux
 2024-02-14 11:20:30 +11:00
Andrew Tridgell 5df46312e8 HAL_Linux: fixed time function to use integer maths 
avoid floating point rounding errors after long uptimes.

thanks to Richard (RSAXVC) for finding this
 2024-02-14 11:20:30 +11:00
Andrew Tridgell e04fd1f05a AP_Scripting: prevent double close in web server 2024-02-14 11:20:30 +11:00
Andrew Tridgell 4851d103e1 AP_Scripting: prevent re-use of closed socket 
this prevents a null pointer dereference after a close of a network
socket
 2024-02-14 11:20:30 +11:00
Andrew Tridgell a3143ab009 AP_Param: don't enable param backup on all boards 
this fixes an issue with resetting of parameters when going between
4.4.x and 4.5.x on MatekH743, and on any other board using flash
storage where the storage size has increased from 16k to 32k between
4.4.x and 4.5.x

The problem is that when you update to 4.5.x the parameter code stored
a backup of parameters in the StorageParamBak storage region which is
in the last section of storage. When you downgrade to 4.4.x the
AP_FlashStorage::load_sector() code tries to load this data and gets
an error as it is beyond the end of the available 16k storage. This
triggers an erase_all() and loss of parameters
 2024-01-28 08:43:14 +11:00
Andrew Tridgell 6e3369611e HAL_ChibiOS: enable clock management on G4 
this allows for a different clock tree in the main fw from the
bootloader
 2024-01-25 11:44:52 +11:00
Andrew Tridgell 06a8aef998 HAL_ChibiOS: switched G4 FDCAN clock to 80MHz 
this requires main CPU clock at 160 MHz instead of 168 MHz
 2024-01-25 11:44:44 +11:00
Andrew Tridgell 2d965684f6 HAL_ChibiOS: fixed CANFD timings 
our CANFD timings were resulting in a lot of busoff errors. Here is an
example of master at 1Mbit/5MBit:

Getting @SYS/can0_stats.txt as -
------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=7
sjw=0 bs1=7 bs2=0 sample_point=90.00000%
FD Timings:  bitrate=5000000 presc=1
sjw=0 bs1=5 bs2=0 sample_point=90.00000%
------- CAN Interface Stats -------
tx_requests:    2689
tx_rejected:    0
tx_overflow:    443
tx_success:     7
tx_timedout:    2232
tx_abort:       0
rx_received:    18470
rx_overflow:    0
rx_errors:      0
num_busoff_err: 34439
num_events:     18477
ECR:            F8
fdf_rx:         18467
fdf_tx_req:     2182
fdf_tx:         0

here is an example with the new timings:

------- Clock Config -------
CAN_CLK_FREQ:   80MHz
Std Timings: bitrate=1000000 presc=8
sjw=1 bs1=8 bs2=1 sample_point=90.00000%
FD Timings:  bitrate=8000000 presc=2
sjw=3 bs1=8 bs2=3 sample_point=80.00000%
------- CAN Interface Stats -------
tx_requests:    3023
tx_rejected:    0
tx_overflow:    0
tx_success:     3023
tx_timedout:    0
tx_abort:       0
rx_received:    27865
rx_overflow:    0
rx_errors:      0
num_busoff_err: 0
num_events:     30888
ECR:            0
fdf_rx:         27862
fdf_tx_req:     3016
fdf_tx:         3016

I am testing between a CubeOrange and a Pixhawk6X. I tested 1, 2, 4, 5
and 8 MBit (which are the only valid FD bitrates in our parameters)

Many thanks to Kai from Salient Motion for finding this issue and
providing the corrected timing table
 2024-01-25 11:44:32 +11:00
Peter Barker f18e196fa9 GCS_MAVLink: use virtual method for GCS_MAVLink::handle_message 
use more appropriate naming for the method.
 2024-01-24 09:07:41 +11:00
Peter Barker 475ef8a06d AP_Mission: fix use of uninitialised stack data 
loading missions via FTP ends up using uninitialised stack data when storing missions.
 2024-01-24 09:04:28 +11:00
Hayden Donald a81f2785aa AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3 2024-01-24 08:03:24 +11:00
MallikarjunSE 873e2eac7d AP_HAL_ChibiOS: update truenav hwdef 2024-01-24 07:58:09 +11:00
J.R. Bronkar 784a21bcab AP_Mission: fractional Loiter Turn Support 
Adds special storage handling for loiter turns. Fractional Loiter
Turns 0<N<1 are stored by multiplying the turn number by 256, then
dividing that number by 256 on retrieval.
 2024-01-22 20:27:20 -08:00
Andrew Tridgell 50b95c81ca AP_Param: whitespace fix 2024-01-23 15:00:30 +11:00
Andrew Tridgell b051719836 SITL: fixed name of pitch limit parameters 2024-01-23 15:00:30 +11:00
Andrew Tridgell e714f0a7a3 AP_HAL_ChibiOS: fixed name of pitch limit parameters 2024-01-23 15:00:30 +11:00
Andrew Tridgell 315f4963cc SITL: fixed parameter names 2024-01-23 15:00:30 +11:00
Andrew Tridgell 4f182f3194 AP_Scripting: fixed parameter names 2024-01-23 15:00:30 +11:00
Andrew Tridgell 061ac459f8 RC_Channel: tidy a comment for LAND_PITCH_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell f51fa31aae AP_TECS: fixed param names in comments 2024-01-23 15:00:30 +11:00
Andrew Tridgell 77877584f8 AP_Scripting: fixed example script 2024-01-23 15:00:30 +11:00
Andrew Tridgell 15a9909127 SITL: tidy TRIM_PITCH to PTCH_TRIM_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 3643eb6d2a AP_Vehicle: tidy TRIM_PITCH to PTCH_TRIM_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 04d72d3adc SITL: convert param files for LAND_PITCH_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 2c73c56403 AP_TECS: convert LAND_PITCH_CD to LAND_PITCH_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 3fddc487df AP_Landing: convert LAND_PITCH_CD to LAND_PITCH_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell bea9102d72 SITL: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell a6bceccd82 AP_HAL_ChibiOS: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell cfc30fac44 AP_Vehicle: change LIM_ROLL_CD to ROLL_LIMIT_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 0430923639 APM_Control: change LIM_ROLL_CD to ROLL_LIMIT_DEG 2024-01-23 15:00:30 +11:00
Andrew Tridgell 74e455ef6a SITL: convert param files for pitch limits 2024-01-23 15:00:30 +11:00