aff98e34e5
TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit.
2014-07-13 17:11:25 +09:00
c7ccd22d96
TradHeli: Set main loop rate time in motors class.
2014-07-08 20:18:24 +09:00
7ef4c11c92
TradHeli: Initialize Rate FF filters.
2014-07-08 20:18:16 +09:00
8eb557d1e0
TradHeli: Add Heli.h file
2014-07-08 20:18:10 +09:00
08e135151a
TradHeli: Add Mode Filter on RC8 input for RSC Controller.
2014-07-08 20:18:00 +09:00
ff71b0fa35
TradHeli: Create new function to move data between AP_MotorsHeli and AP_AttitudeControl.
2014-07-08 20:17:57 +09:00
b37b0c5061
TradHeli: remove use of throttle_mode
2014-02-15 05:27:47 +11:00
91124bcf8b
TradHeli: remove get_heli_rate_yaw from main code
2014-02-15 05:27:43 +11:00
3b0de0d23d
Copter: integrate trad heli AttControl
2014-02-15 05:27:43 +11:00
df9d1614e2
Copter: remove PID logging
...
Almost never used and eats up limited log description space
2014-01-13 17:23:39 +09:00
794890884c
TradHeli: enable Landing Collective when we are not moving
...
This prevents full negative pitch when touching down in Alt Hold or Auto-Landing.
2014-01-10 10:50:58 +09:00
9485363c53
TradHeli: dynamic flight speed minimum to 5m/s
2013-11-16 16:58:14 +09:00
8c9ab50ba2
TradHeli: restore CC_COMP and PIRO_COMP
2013-11-15 22:58:43 +09:00
c9c803ffd4
TradHeli: move STAB_COL_MIN to main parameter list
2013-11-15 22:58:32 +09:00
197fc67897
TradHeli: move pilot desired rotor speed to heli.pde
2013-11-15 22:58:24 +09:00
527f05ddec
Copter: remove unused init_rate_controllers
2013-11-15 22:58:22 +09:00
232a116973
TradHeli: Use Leaky Integrator on Yaw Rate controller
...
Use when rotor is not running to prevent the rudder from slowly moving over
2013-11-15 22:58:02 +09:00
3ce16113b5
TradHeli: use landing collective when landed or landing
2013-11-15 22:58:00 +09:00
34fb70cfc7
TradHeli: formatting and param description changes
2013-11-15 22:57:45 +09:00
46118b59d7
TradHeli: integrate motor lib changes
2013-11-15 22:57:43 +09:00
8f2c9591ff
TradHeli: dynamic_flight flag based on inertial nav speed
...
Created new heli.pde for heli_integrated_swash and check_dynamic_flight
2013-11-15 22:57:20 +09:00
998058ec07
ArduCopter - removed unused motor pde files including heli.pde, motors_hexa.pde, motors_octa.pde, motors_octa_quad.pde, motors_tri.pde and motors_y6.pde
2012-04-04 23:06:12 +09:00
be3fe36c52
Small fix on the Traditional Helicopter Collective-Yaw compensation calculation.
2012-03-15 20:14:18 -04:00
a480b32400
Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled.
...
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-03-03 08:14:14 -05:00
0ff44563ec
ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls
2012-03-02 17:57:08 +11:00
e49c2d2871
Rescale TradHeli roll_out and pitch_out into the min and max ranges to provide linear motion across the input range instead of stopping when the input hits the constrain value. These calculations are based on an assumption of the user specified roll_max and pitch_max coming into this equation at 4500 or less, and based on the original assumption of the total g.heli_servo_x.servo_out range being -4500 to 4500.
...
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-03-01 22:04:50 -05:00
232359186e
TradHeli - fixed small parameter bug affecting helis. The servo parameters were declared as GSCALAR instead of GGROUP in Parameters.pde.
...
also renamed heli parameters from _coll_ to the more descriptive _collective_
2012-02-18 20:57:51 +09:00
498970a948
TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction.
2012-02-05 11:04:38 +09:00
693a2cfdcd
TradHeli - fix to servo limits. They had been unnecessarily limited to the collective pitch's min and max but actually there are cases (for example when the swash is leaning over 45degrees) where one servo goes well beyond the collective pitch's min or max.
2012-01-29 21:14:37 +09:00
6c03307217
ArduCopter Heli: add motors_output_enable function
2012-01-25 22:41:09 -08:00
a19afd926a
APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV
...
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
a separate macro expansion for the MSK value.
2012-01-09 21:57:01 -08:00
37cda3c364
Cosmetic
2012-01-04 09:28:36 -08:00
68e6be5eeb
TradHeli - fixed roll/pitch so it's not scaled when throttle is scaled
2011-12-08 21:30:47 +09:00
eee2da01ac
Arducopter: each motors_ pde uses APM_RC.SetFastOutputChannels
2011-11-25 20:00:18 -08:00
f397bae793
ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up
...
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
2011-11-20 22:30:42 +09:00
c8d2341156
TradHeli - automatically reinitialise swash plate if HSV_MAN is switched from 1 to 0.
...
Turn-off feed forward correction to yaw based on collect when in HIL mode.
2011-11-17 20:43:07 +09:00
2112f74324
TradHeli - reversed the direction of "phase angle" to make it more intuitive. This parameter is used to correct for a heli's tendency to lean left or right when the pilot gives it a pitch forward command.
2011-11-13 22:40:46 +09:00
70aadd4afc
TradHeli - added two parameters to improve heli control.
...
heli_phase_angle allows pilot roll/pitch command to be translated into mixed roll and pitch.
heli_coll_yaw_effect mixes some collective into the yaw so tail can counter act collective movements more easily.
2011-11-13 22:20:57 +09:00
a7038cbaf9
TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs
2011-11-12 23:23:07 +09:00
12f5f3f96e
TradHeli - fix to allow tail servo to be reversed. Also increase max movement of tail servo to 45 degrees.
2011-11-05 12:31:30 +08:00
ea66c74ff0
TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch.
2011-10-29 17:27:43 +09:00
142707711e
Updates to guided mode from Michael O.
...
removed or commented unused static vars
2011-10-15 13:09:04 -07:00
b5ea05698e
TradHeli - added servo averaging to allow support of analog servos
...
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
2011-09-25 16:51:25 +09:00
ddb4de1949
TradHeli - fix to set motor_auto_armed = true if throttle > 0. Required to let ALT_HOLD work!
2011-09-25 12:30:37 +09:00
1456a2a912
renamed top level directories
...
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00
Robert Lefebvre
Randy Mackay
Andrew Tridgell
Pat Hickey
Jason Short
unknown
Jason Short