Commit Graph

80 Commits

Author SHA1 Message Date
Lucas De Marchi 27d95b67a8 AP_Compass: AK8963: remove state machine
Don't use a state machine in AK8963: the start_measurements() method
should be called only once.  Even if there's a magnetic sensor overflow
the only thing we should do is to discard the new data.

This also moves the _collect_samples() method to be inside _update()
since it's the only place it should be called from, the one running on
the timer thread.
2015-07-23 17:44:35 +10:00
Lucas De Marchi e232543fca AP_Compass: AK8963: change initialization and rename methods
We need to check the AK8963's id before anything else Here we are
reordering the calls to _calibrate() and _check_id(). After that we
don't need to read and write again the AK8963_CNTL1 register.

While at it do some renames as well:
	- _configure() -> _setup_mode(): since now there's a
 	  _bus->configure() it became confusing what actually it's
	  doing.
	- make error messages say what we were actually trying to do but
	  couldn't. Also remove PSTR since this is linux-only.
	- start_conversion() -> start_measurements():  We are instructing the
          bus to start to get the samples, not to tell the chip to start an
          analog->digital conversion like in other sensors.
2015-07-23 17:44:35 +10:00
Lucas De Marchi ae5d9baddb AP_Compass: AK8963: remove defines not used anymore
The MPUREG_PWR_MGMT_1 defines were used when we cared about the MPU9250
initialization code. Now all initialization is done by the MPU9250 class
itself, so remove these defines.

Also remove AK8983_SELFTEST_MAGNETIC_FIELD_ON that is never used and let
the defines always with 2 bytes to improve readability.
2015-07-23 17:44:34 +10:00
Lucas De Marchi 28d3d775a4 AP_Compass: AK8963: remove resolution member
We only use the highest one and there's no intention to support the
14bits one. Just use the define rather than saving it as a member.
2015-07-23 17:44:34 +10:00
Lucas De Marchi 86b3312112 AP_Compass: AK8963: factor out common code of read_raw()
Similar code was added in the read_raw() implementation for each bus.
Add a new POD struct read_raw to contain the registers from the AK8963
and use it instead as argument.
2015-07-23 17:44:33 +10:00
dgrat d941174978 AP_Compass: AK8963: enhance the readability
Reduce the deepness of indentation and fix coding style.
2015-07-23 17:44:33 +10:00
Julien BERAUD 51c3c499e2 AP_Compass: support AK8963 on I2C 2015-07-10 16:46:30 +10:00
Julien BERAUD 0b41da0dea AP_Compass: rework to make the bus generic for AK8963
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
2015-07-10 16:46:29 +10:00
Julien BERAUD 0cd584c293 AP_Compass: fix rotation for bebop AK8963
Set the correct rotation for bebop
2015-07-10 16:46:29 +10:00
Andrew Tridgell c83d5b1f08 AP_Compass: only build AK8963 driver on Linux
must match MPU9250 build
2015-07-09 11:57:27 +10:00
Randy Mackay d192b3ccea Compass: set device id for ak8963 and hmc5843 2015-07-06 21:04:46 +09:00
Lucas De Marchi 1deb837e70 AP_Compass: Use common function in MPU9250 for initialization 2015-07-06 10:48:07 +10:00
Staroselskii Georgii 7a417d1151 AP_Compass: AK8963 rework
Got rid of extra abstraction layer. There is no need for that now.
2015-07-06 10:48:06 +10:00
Andrew Tridgell 5b0394eb05 AP_Compass: start MPU9250 driver at low speed
this raises the chances of successful init of the MPU9250
2015-07-02 08:48:06 +10:00
Lucas De Marchi 95627cf412 AP_Compass: use functor macros
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:52 +10:00
Andrew Tridgell 015fce5183 AP_Compass: revert AP_Math class change 2015-05-05 13:27:06 +10:00
Tom Pittenger ad11a57f57 AP_Compass: compiler warnings: apply is_zero(float) or is_equal(float) 2015-05-05 13:26:51 +10:00
Andrew Tridgell be3d6c924e AP_Compass: rename enum values to avoid header conflicts for 'ERROR' 2015-05-05 09:45:53 +10:00
Lucas De Marchi 996739df12 AP_Compass: Do not panic if compass is not found
Copter uses 2 compasses for linux configuration, but one of them may not
be available. Do not panic if a AK8963 isn't found.
2015-04-14 09:29:12 +10:00
Andrew Tridgell 7b51c907f5 AP_Compass: zero some more variables in constructor and init 2015-03-13 19:22:11 +11:00
Andrew Tridgell 0efd3bacea AP_Compass: make new backend match old PX4 behaviour
when a compass is internal only apply board orientation, not user
specified rotation
2015-03-13 18:46:15 +11:00
Andrew Tridgell a871c87cad AP_Compass: use state array for compass variables 2015-03-13 18:46:15 +11:00
Víctor Mayoral Vilches 13f0aa5ecd AP_Compass: Separate common code into backend
_copy_to_frontend function takes care of abstracting
this code from the driver. For now the function takes
care of the offset and rotation that is common.
2015-03-13 18:46:15 +11:00
Víctor Mayoral Vilches d3b76cd8d3 AP_Compass: split compass into frontend/backend 2015-03-13 18:46:15 +11:00
Grant Morphett 52c5db8440 AP_Compass: Changes to fix the warnings in rover sitl build.
We are starting the process of resolving all the warnings in the
ardupilot builds of all vehicles and platforms.
2015-02-11 18:16:45 +11:00
Staroselskii Georgii c16eb5d330 AP_Compass: fixed corrections for AK8963 2015-01-09 06:38:22 +11:00
Staroselskii Georgii 4394f0cf75 AP_Compass: fixed external compass detection for AK8963 2015-01-09 06:38:22 +11:00
Staroselskii Georgii f0753e965e AP_Compass: eliminated possible division by zero in AK8963 2015-01-09 06:38:22 +11:00
Andrew Tridgell 9835544163 AP_Compass: fixed build on non-Linux platforms 2015-01-07 08:41:14 +11:00
Staroselskii Georgii 0d1cf347c7 AP_Compass: added AK8963 support 2015-01-07 08:41:12 +11:00