Amilcar Lucas
36bcd827b4
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
Amilcar Lucas
fe4713b46e
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
Amilcar Lucas
f3f89004e9
More work on ch9, 10 and 11
2012-08-04 19:44:41 +02:00
Amilcar Lucas
431ed1c9b9
More flexible RC support
2012-08-04 18:39:20 +02:00
Andreas M. Antonopoulos
1ea2cb7b75
AP_Limits: experimental "bounce" mode.
2012-07-31 18:39:58 -07:00
Robert Lefebvre
54b320a9a0
Fixing Trad Heli Ext ESC Controller
...
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
2012-07-31 17:47:25 -04:00
rmackay9
23a1e33e20
AP_InertialSensor_MPU6000: another attempt at fixing the SITL build
2012-07-28 17:19:19 +09:00
rmackay9
06a4aaa763
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
rmackay9
9a558be53e
AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable
2012-07-28 16:23:25 +09:00
rmackay9
ea4e56309d
AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning
2012-07-28 15:22:37 +09:00
rmackay9
a49454e905
AP_AHRS: updated test sketch to allow use of MPU6000's DMP
2012-07-28 14:27:26 +09:00
rmackay9
0820ebddb9
AP_AHRS_MPU6000: first draft implementation of class that uses MPU6000's DMP to calculate attitude
2012-07-28 14:17:38 +09:00
rmackay9
5a9211c278
AP_AHRS: removed var_info from AP_AHRS class (moved to AP_AHRS_DCM)
2012-07-28 14:16:56 +09:00
rmackay9
c2b47d2bf9
AP_AHRS_DCM: moved var_info to belong to AP_AHRS_DCM instead of AP_AHRS
2012-07-28 14:16:15 +09:00
rmackay9
ae119b08b3
AP_IMU_INS: added gx(), gy() and gz() methods to return gyro offsets
2012-07-28 14:15:23 +09:00
rmackay9
dfea845c37
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
Andrew Tridgell
e0b6ed12be
MAVLink: rename the message_definitions directory
2012-07-26 10:03:36 +10:00
Andrew Tridgell
b4fc025151
MAVLink: removed MAVLink 0.9 message definitions
...
we are now 1.0 only
2012-07-26 10:03:36 +10:00
rmackay9
960c2f08af
AP_Mount: addition of Amilcar's mount_type
...
set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
2012-07-25 11:00:38 +09:00
Jonathan Challinger
21f0ed00b3
AHRS: normalise GA_b before computing error vector only if too large
...
When GA_b is small the direction of the vector is unreliable, so
normalising can exacerbate the error in the direction
2012-07-23 17:16:50 +10:00
Andrew Tridgell
99410cbbfe
AP_AnalogSource: fixed reporting of VCC
...
the VCC pin number should not be converted
2012-07-21 19:49:24 +10:00
Andrew Tridgell
5f5c884a6d
AHRS: if we don't have gps correction enabled, zero the yaw correction
2012-07-20 17:21:04 +10:00
Andrew Tridgell
4f41b876b1
AHRS: allow the gps/accelerometers to control yaw when rolled
...
this solves a problem with yaw estimation when at high roll angles,
when the compass code becomes ineffective
2012-07-20 11:50:04 +10:00
Andrew Tridgell
404803a734
MAVLink: imported updated generated mavlink C code
...
no functionality changes
2012-07-20 11:50:03 +10:00
Jason Short
25c3ed6c4b
Oilpan ADC parameters added
...
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
2012-07-18 22:57:11 -07:00
Jason Short
8a4a9a929e
Lead Filter: simplified calculation
2012-07-18 22:57:10 -07:00
Andrew Tridgell
f704408094
GPS-UBlox: removed duplicate config messages
...
these were left over from debugging
2012-07-19 15:23:15 +10:00
Amilcar Lucas
13fb2e6dc9
RC_Channel parameters: Fix a typo
2012-07-18 22:39:49 +02:00
Amilcar Lucas
dea5b88379
Support up to 7 aux servo outputs
2012-07-18 21:58:22 +02:00
rmackay9
a2e6af1f9c
AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux)
...
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
2012-07-18 23:20:05 +09:00
Amilcar Lucas
8acc432084
Replace long with int32_t
2012-07-18 02:12:31 +02:00
Amilcar Lucas
f5c2ffca34
Use ascending order in the values
2012-07-18 02:11:49 +02:00
Amilcar Lucas
23f009f665
Improve parameter documentation, it still does not work, but is an improvement.
...
I just do not understand why these parameters do not appear in Mission planner :(
2012-07-17 23:32:30 +02:00
Michael Oborne
b97f9bb803
Airspeed Library - fix param names.
...
The Group definition give the start of the param name.
This way we can maintain multiple instances if required of the same library as options.
2012-07-16 21:48:47 +08:00
Andrew Tridgell
dfb22554aa
Airspeed: Added AP_Airspeed sensor library
...
this will allow an airspeed sensor object to be passed to AHRS for
dead reckoning
2012-07-16 11:21:20 +10:00
rmackay9
bec5321b8b
AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel!
2012-07-16 00:38:58 +09:00
rmackay9
3b9a1d4305
RC_Channel_aux: added enable_out method to help stop servos from moving before the mount has initialised.
...
changed parameter names of "update_aux_servo_function" to make it more clear that any 4 servos can be passed in (not just servos 5~8).
Also allowed NULL servos to be passed in as parameters because we only need 3 in ArduCopter.
2012-07-15 16:28:53 +09:00
rmackay9
e83275d8ae
AP_Camera: changed "int" to "int16_t" and "long" to "int32_t" here and there.
2012-07-15 16:26:12 +09:00
Andreas M. Antonopoulos
31fd74d94c
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Michael Oborne
804898c2a5
fix param config names
2012-07-14 15:34:15 +08:00
Robert Lefebvre
716ce6a5a7
Change to prevent Tricopter servos from going hard-over during Disarmed state.
...
Believe this was an oversight when the change to AP_Motors went in.
2012-07-13 23:12:26 -04:00
Robert Lefebvre
ab1212d8d2
Instituting Yaw Differential on Multirotors. Intent is to stop "rise on yaw input".
...
Since motors with increasing speed due to yaw input seem to generate more thrust that motors that slow lose thrust, thus net thrust goes up, causing copter to climb.
Values are a guesstimate, proven out by test flying. This could probably become a parameter.
2012-07-13 22:59:28 -04:00
Andreas M. Antonopoulos
9dfb3c4db9
Added Michael Pursifull's Maxsonar HRLV model support
2012-07-11 18:46:47 -07:00
rmackay9
d3426420ad
AP_Camera: moved seme constructor initialisers around to remove compile warnings
2012-07-12 09:33:22 +09:00
rmackay9
1105a35c77
AP_AnalogSource_Arduino: fix to allow analog port to be read to be specified as a "channel" (i.e. A0)
...
Also fixed example range finder sketch to work with interrupt enabled AP_AnalogSource_Arduino class
2012-07-11 21:19:17 +09:00
Amilcar Lucas
eb647b5320
AP_Mount: add support for non-spring-loaded joysticks
2012-07-11 00:07:33 +02:00
Amilcar Lucas
ad60fac863
RC_Channel: improve parameter documentation
2012-07-11 00:07:10 +02:00
Amilcar Lucas
42301af148
Remove unused function, remove unnecessary angle wrapping.
2012-07-11 00:06:45 +02:00
Amilcar Lucas
74ef712cd1
Allow mount control when no AHRS exists
...
Allow mount control on non stabilized axes
2012-07-11 00:06:26 +02:00
Andrew Tridgell
63a83b95b4
AP_Math: added get_distance_cm() to return in centimeters
2012-07-11 07:49:05 +10:00
