Randy Mackay
0f234583d6
Copter: poshold clears wind est when disarmed or landed
2020-11-10 08:56:36 +09:00
Randy Mackay
ed7580e83c
Copter: takeoff relaxes wpnav and pos control during spool up
2020-11-06 08:24:03 +09:00
Hwurzburg
83e1fe94d1
Copter: fix metadata in FS_GCS_ENABLE param
2020-11-06 08:23:31 +09:00
murata
f18585c584
Copter: Matches the minimum value of failsafe_throttle_value to the operation
2020-11-03 10:42:29 +09:00
Paul Riseborough
379506b718
ArduCopter: Don't request EKF yaw reset unless innovations are large
...
This prevents unwanted resets if GPS fails.
2020-10-30 14:45:40 +09:00
Rishabh
6e19eac9aa
ArduCopter: remove nomination of system ids
2020-10-27 17:15:04 +11:00
Randy Mackay
50d9dcce9b
Copter: 4.0.5 release notes
2020-10-27 09:13:43 +09:00
Peter Barker
225de23950
Copter: cope with race conditioning popping points on SmartRTL return
...
There is a race with the cleanup thread. While thin, it only has to
happen once. After this patch the race would have to happen... a lot.
Co-authored-by: jasclarke308 <jasclarke308@gmail.com>
2020-10-24 08:59:26 +09:00
Randy Mackay
248d80eb37
Copter: integrate ahrs::get_variances change
...
offset is no longer returned
2020-10-21 08:58:45 +09:00
Randy Mackay
ea7f850738
Copter: guide mode fix for takeoff in attitude control submode
...
It was not possible to takeoff when thrust was provided instead of climb rate (which is used depends upon DEV_OPTIONS)
2020-10-20 23:04:45 +09:00
Randy Mackay
7a90ed4bb5
Copter: auto allows arming casts param to uint32_t
2020-10-20 23:04:45 +09:00
Randy Mackay
9104b4800f
Copter: correct GuidedOptions enum after peer review
...
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2020-10-20 23:04:45 +09:00
Randy Mackay
29fedff826
Copter: guided implementations moved to match declarations
...
this should be a non-functional change
2020-10-20 23:04:45 +09:00
Randy Mackay
5adf1d9596
Copter: guided mode angle controller sets auto-armed from run method
2020-10-20 23:04:45 +09:00
Randy Mackay
c1c9d87efe
Copter: move auto allows_arming in mode_auto.cpp
...
this should be a non-functional change
2020-10-20 23:04:45 +09:00
Randy Mackay
ab42bbc43f
Copter: guided mode velocity control can trigger takeoff
2020-10-20 23:04:45 +09:00
Randy Mackay
eb3aca7acf
Copter: add GUIDED_OPTIONS to allow arming from transmitter
2020-10-20 23:04:45 +09:00
Randy Mackay
3ebfe502d3
Copter: 4.0.5-rc2 release notes
2020-10-08 09:15:56 +09:00
Randy Mackay
49e1e8cc16
Copter: integrate ahrs.pre_arm_check
2020-10-07 11:53:07 +11:00
Randy Mackay
eeaf135cca
AP_Arming: integrate ahrs.pre_arm_check
2020-10-07 11:53:07 +11:00
Randy Mackay
1858fbe951
AP_Arming: correct proximity pre-arm check msg
2020-10-06 20:52:29 +11:00
Randy Mackay
5d31a443b6
Copter: update 4.0.5-rc1 release notes
2020-10-06 16:43:13 +09:00
Randy Mackay
8753d3cf8d
Copter: 4.0.5-rc1 release notes
2020-10-06 16:43:10 +09:00
Randy Mackay
e2d41a3e04
Copter: integrate parachute check_sink_rate
...
also move set_is_flying into check parachute to increase it's update rate
2020-10-06 16:14:59 +11:00
Andrew Tridgell
dbf6f6f4b1
Copter: fixed parachute checks for sink rate
...
ensure is_flying is set, setup sink rate at the right position, force
disarm if chute releases
2020-10-06 16:14:59 +11:00
Peter Barker
c86ee44264
Copter: correct compilation when AFS enabled
2020-10-06 11:25:09 +11:00
Peter Barker
4136397810
Copter: correct compilation when CIRCLE mode is disabled
2020-10-06 11:25:09 +11:00
Peter Barker
af53f9ce64
Copter: correct compilation when AUTO/RTL are disabled
2020-10-06 11:25:09 +11:00
Peter Barker
56790625b8
Copter: stop passing unused inav into autorotate library
2020-10-01 21:13:20 +10:00
Randy Mackay
8b3cc0b255
Copter: fixup auto options
2020-10-01 08:48:06 +09:00
Michael du Breuil
50dfe3f197
Copter: Add AUTO_OPTIONS and support arming and throttle bypass
...
This allows you to arm the copter without any extra GCS commands while
in auto, and can be done from both the GCS, or the RC Tx. This is useful
for creating a simpler workflow.
This also allows you to set the auto_armed flag internally, which
bypasses the need to raise the throttle stick for the copter to start a
takeoff.
This exposed a problem where we would start running the controllers
before the EKF was at all initialized, if you switched into auto to
early. This now has a check that prevents us from running the mission
state machine until after the origin has been set. This was a suggestion
from @rmackay9.
When combined these options allow you to have the vehicle on the ground,
disarmed in auto with a takeoff waypoint loaded, then just arm the
aircraft and watch it takeoff. This is a feature we've had on quadplanes
for quite awhile now, and it has proven to be very nice for operators.
2020-10-01 08:46:29 +09:00
Peter Barker
b03b3041e0
Copter: remove stale MAGNETOMETER config option from config files
...
This isn't used in the code any more
2020-09-29 11:17:08 +10:00
Andy Piper
e22f7ed353
Copter: remove duplicate include
2020-09-24 08:22:16 -07:00
Patrick José Pereira
ec153f59a2
ArduCopter: Use new AP_FWVersionDefine header
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-09-23 20:58:35 +10:00
Tatsuya Yamaguchi
813bc2e08a
Copter: replace message indicating that initialisation has completed
2020-09-22 09:52:52 +10:00
Andy Piper
b8f613c965
Copter: rename ADSB_ENABLED to HAL_ADSB_ENABLED and remove from config
2020-09-22 09:33:51 +10:00
Randy Mackay
5a0e8daf61
Copter: fix 4.0.4-rc1 release notes
...
GPS-For-Yaw only works with F9 (not M9) GPSs
2020-09-16 15:43:42 +09:00
Randy Mackay
2c14463368
Copter: 4.0.4 release notes
2020-09-16 13:56:37 +09:00
Randy Mackay
5b71726c73
Copter: poshold wind effect comp limited to 2/3rds of angle max
2020-09-16 08:19:17 +09:00
Randy Mackay
ab54f8805a
Copter: guided mode checks dest before changing submode
2020-09-15 08:36:39 +09:00
Randy Mackay
29a2be2d63
Copter: minor comment fix
2020-09-09 15:32:37 +09:00
Peter Barker
dba3158446
Copter: correct mode change for GCS failsafe in SmartRTL mode
...
In the case that you:
- have previously done a successful SmartRTL flight
- get a mid-air gcs failsafe and enter SmartRTL
- recover from that gcs failsafe but remain in SmartRTL
- get another mid-air failsafe
then without this patch you will enter LAND mode.
When determining our failsafe action, we were looking at whether we
should just continue landing. To do that, we ask the current mode if we
are landing. Problem is that SmartRTL was handing back the wrong answer
- it was handing back ModeRTL's answer rather than its own, and
ModeRTL's answer was "yes, I'm landing", as that's the last state that
step 1 in the above list leaves that mode in.
This patch simply hands back the correct answer for, "am I landing"
2020-09-08 09:05:03 +09:00
Peter Barker
397b95154c
Copter: remove superfluous RETURN_TARGET_ALTTYPE_ from enum class names
...
Just repeats what's in the required prefix for the enum class
2020-09-08 10:01:59 +10:00
Randy Mackay
2398b5dec4
Copter: guided consumes set-pos-target-local-ned Z-axis as offset from origin
2020-09-01 10:27:18 +10:00
Randy Mackay
afa810041b
Copter: 4.0.4-rc4 release notes
2020-08-28 09:37:59 +09:00
Iampete1
c265a38344
Copter: add gripper release FS_Option
2020-08-26 17:58:24 +09:00
Peter Barker
afa153fb6f
Copter: remove wrapper for get_avoidance_adjusted_climbrate
...
Only the modes are interested in this - there's no point having it on
the Copter object.
2020-08-22 08:31:25 +09:00
Randy Mackay
315d9da138
Copter: add ekf alt pre-arm and mode init checks
2020-08-20 12:41:40 +09:00
Siddharth Purohit
9b9954aa46
Copter: move to using CANManager library
2020-08-19 17:31:09 +10:00
Peter Barker
38122eb35e
ArduCopter: use an enumeration for the AP_Avoidance recovery action
2020-08-19 11:38:19 +10:00