Commit Graph

40750 Commits

Author SHA1 Message Date
Andy Piper 93abfdb905 Copter: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Andy Piper 0eddc8b589 AP_Camera: implementation of the RunCam device protocol for RC camera control
Allows control of 2-key and 5-key OSD menus and recording start/stop
OSD is disabled while in the RunCam menu but reinstated on exit
add arming checks to prevent arming while the OSD menu is enabled
2019-12-30 13:02:04 +11:00
Andy Piper c9b96a5e79 AP_SerialManager: add support RunCam serial protocol 2019-12-30 13:02:04 +11:00
Andrew Tridgell e813d349ba Tools: added bin format as valid firmware 2019-12-29 19:57:06 +11:00
Randy Mackay f0848551d9 Copter: version to 4.0.1-dev 2019-12-29 12:52:27 +09:00
Randy Mackay ac8e402158 Copter: 4.0.0 release notes 2019-12-29 12:51:39 +09:00
Peter Barker 29e8d17e2c Tools: show test timings in CI output 2019-12-29 08:05:01 +11:00
Randy Mackay 5d70af3f76 Copter: 4.0.0-rc6 release notes 2019-12-28 11:32:18 +09:00
Siddharth Purohit 3278ac2e63 AP_UAVCAN: remove unnecessary scary message UC Node Down 2019-12-27 17:42:57 +11:00
CUAVcaijie 39c87f473a AP_Periph: add BARO_ENABLE option 2019-12-26 15:51:44 +11:00
CUAVcaijie ccd54409f3 HAL_ChibiOS: Adding SPI devices for CUAV_GPS 2019-12-26 15:51:44 +11:00
CUAVcaijie 2df2e5c275 HAL_ChibiOS: Fix DMA of SPI1 TX on STM32F412 2019-12-26 15:50:18 +11:00
CUAVcaijie 8daa8f34c9 AP_Baro: added averaging of CAN baro output 2019-12-26 12:21:41 +11:00
Andrew Tridgell 4b4642dd4d HAL_ChibiOS: allow handling of much higher receiver baudrates with DMA
this uses two DMA RX bouncebuffers to minimise the time with DMA
disabled so that we can handle much higher baudrates
2019-12-26 10:42:48 +11:00
Andrew Tridgell 58292821b3 HAL_ChibiOS: fix DMA on UARTs for F303 2019-12-26 10:42:48 +11:00
Andrew Tridgell 652d137594 HAL_ChibiOS: fixed DMA channels for f3 USART2 2019-12-26 10:42:48 +11:00
Michael du Breuil 7d8005ef27 Plane: Update flaperons for all control modes
Fixes flaperons not working during takeoff, and is generally slightly
easier to reason about
2019-12-24 16:58:46 +11:00
Peter Barker 3ffdfc7302 autotest: correct parachute test 2019-12-24 15:27:39 +11:00
Andrew Tridgell c6322c7c98 GCS_MAVLink: send abs throttle in VFR_HUD 2019-12-24 15:14:03 +11:00
Andrew Tridgell 6d4f4d7a3b Plane: allow negative VFR_HUD throttle 2019-12-24 15:14:03 +11:00
Peter Barker 12cccac361 Sub: let GCS base class handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Peter Barker 1db9201a90 Plane: let GCS base class handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Peter Barker a56ab9136e Copter: let GCS base class handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Peter Barker 05562968e1 Rover: let GCS base class handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Peter Barker 01710c035e GCS_MAVLink: handle proximity and rangefinder messages 2019-12-24 12:08:54 +11:00
Peter Barker 708a6f99a6 SRV_Channel: remove default case in get_limit_pwm
All cases are currently handled, and this is something people should
probably think about if they're introducing another case!
2019-12-24 11:50:03 +11:00
Peter Barker 72e6446204 Copter: make requires_terrain a callback on the flightmode
This will prompt new modes to consider whether failsafe should be active
for terrain.
2019-12-24 09:46:19 +09:00
Michael du Breuil 8bd4f2b097 AP_RangeFinder: Allow the VL53L1X to be put into short range mode 2019-12-24 11:40:47 +11:00
Michael du Breuil 224ea744e3 AP_Rangefinder: Reset the VL53L1X before setup
A number of the config steps make the assumption they are running from
the sensors default power on state. If you do a soft reset of the
vehicle without killing power to the sensor this means the second time
you configure the sensor you will start from a state which didn't match
the base assumptions and can lead to the sensor preforming signficantly
differently then it was intended to. This issues a soft reset, and waits
for it to reboot before proceeding with configuration. If it's a
watchdog reset we don't want to spend long enough to have ensured the
sensor reset, so we say the sensor setup completely failed and don't use
it, as not using it will be less erroneous then using a misconfigured
sensor.
2019-12-24 11:40:47 +11:00
Andrew Tridgell 7b4b88d568 AP_Declination: re-generate mag tables
max interpolate error between -60 and 60 latitude is 13.86 mGauss
2019-12-24 11:33:10 +11:00
Andrew Tridgell 79bbd3ce9f AP_Declination: update generate script
added ability to display max error
2019-12-24 11:33:10 +11:00
Peter Hall 956c3f29a3 AP_BLHeli: allow connection with reversable ESCs 2019-12-24 10:50:16 +11:00
Randy Mackay 5e13fc1e0f Copter: 4.0.0-rc5 release notes 2019-12-23 22:52:04 +09:00
Andrew Tridgell 6eb86c6cdb HAL_ChibiOS: removed PB1 and PB0 TIM1 complementary channels for F76x
these do not work, possibly a datasheet bug
2019-12-23 21:46:57 +11:00
Andrew Tridgell c8c6c80aef HAL_ChibiOS: switch MatekF765 to timer 12
fixes PWM 5 and 6
2019-12-23 21:46:57 +11:00
Andrew Tridgell 4a54aa92c6 ChibiOS: enable timers 12, 13 and 14 for system timer 2019-12-23 21:46:57 +11:00
Andrew Tridgell a06da57f3e waf: fixed aligned size of bootloader in ROMFS 2019-12-23 21:46:33 +11:00
Andrew Tridgell 4774c78a12 Plane: update release notes for 4.0.2beta3 2019-12-23 20:26:43 +11:00
Randy Mackay f56a426193 Copter: gcs failsafe disabled by default 2019-12-23 14:35:15 +09:00
Peter Barker 19c02471cf Tools: autotest: add test for NMEA output 2019-12-23 11:19:59 +11:00
Andrew Tridgell dfaf134338 mavlink: merge latest changes from Amilcar 2019-12-23 10:31:15 +11:00
Andrew Tridgell e52a3b9978 AP_InertialSensor: default fast sampling on
if we have a first IMU capable of fast sampling then we want it
enabled by default
2019-12-23 09:55:07 +11:00
Andrew Tridgell ccd1ce406c HAL_ChibiOS: scale uart rx buffer size with baudrate
this ensures we have enough buffer space for a RTK GPS, as well as for
high speed comms with a companion computer
2019-12-23 09:54:36 +11:00
Oliver Walters 9229efbf81 AP_PiccoloCAN: Always use bulk ESC commands 2019-12-22 09:48:40 +11:00
Oliver Walters fadc968b38 AP_PiccoloCAN: Improve arm/disarm ESC behaviour
- When disarmed, broadcast a "software disable" command to all ESC on the bus
- This means that ESC will reject any PWM commands
- When armed, ensure each ESC is enabled before sending PWM commands
2019-12-22 09:48:40 +11:00
Oliver Walters 9a7b78d49d waf: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00
Oliver Walters 431b07bba0 SRV_Channel: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00
Oliver Walters 5fa54f3986 GCS_MAVLink: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00
Oliver Walters 7c3391d0d8 AP_BoardConfig: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00
Oliver Walters 2e0d2e2db0 AP_Arming: added support for Piccolo CAN ESCs 2019-12-22 09:48:40 +11:00