Commit Graph

67 Commits

Author SHA1 Message Date
rmackay9 b2f12c4854 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
uncrustify 841b4ce9c8 uncrustify ArduCopter/test.pde 2012-08-21 19:19:50 -07:00
rmackay9 8a6085a3ba ArduCopter: removed unused maggy variable from test.pde to reduce compiler warnings. 2012-08-18 16:03:26 +09:00
rmackay9 36f947acb9 ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Jason Short 4d5d16720b ACM Test: Added a return statement 2012-08-15 21:37:23 -07:00
Jason Short 31f31eec75 ACM : Test for bearing calc 2012-08-15 21:04:24 -07:00
Jason Short da6d981479 Arducopter: Testing toy mode - commented out by default 2012-07-19 17:50:42 -07:00
Jason Short 0d8e8e0a04 Arducopter: INS
removed IMU test, updated INS test to include normalized gravity accel vector.
2012-07-18 22:57:10 -07:00
Jason Short f35b5ba13f Arducopter:test.pde made a note for WP radius that shows m in the printout. 2012-07-10 21:53:38 -07:00
Andrew Tridgell 33440567e6 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Jason Short e8510faf5d changed define to param for throttle_min 2012-06-20 15:00:05 -07:00
rmackay9 af86ae8cbf ArduCopter: fixed compile error by declaring extern print_latlon 2012-04-30 21:44:27 +09:00
Andrew Tridgell 435a64b97e ACM: fixed HIL build 2012-04-30 22:42:17 +10:00
rmackay9 a1f5661161 ArduCopter: restored gps test in CLI
Added check so not enabled when using 1280.  Also fixed comments in other tests to explain the check for the 1280.
2012-04-30 17:29:50 +09:00
rmackay9 ad9a8acbab ArduCopter - test.pde - changed references "motor_armed" to "motors.armed()" as part of move to AP_Motors library.
Change to ESC initialisation calls to use motors.throttle_pass_through method of AP_Motors class.
2012-04-04 23:05:26 +09:00
Andrew Tridgell e956e21e7d ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
Andrew Tridgell 547b4ed55b AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Andrew Tridgell 1016d3c95d ACM: removed quaternion special cases in CLI code 2012-03-10 10:34:31 +11:00
Andrew Tridgell 7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Jason Short ca34d7b7c2 Added test for stab_d gain scheduling. 2012-02-28 20:16:40 -08:00
Jason Short fa32b084bd Added SW test for Manual Boost 2012-02-19 12:39:40 -08:00
Jason Short 71d57a5371 Enabled PWM test 2012-02-09 22:22:01 -08:00
Jason Short 5ab37a346c reduce test.pde size for 1280 users 2012-01-28 22:16:24 -08:00
Doug Weibel ed9f7cb1b6 Update battery monitoring code for ArduCopter
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short 4eacc6f3eb re-enabled relay test 2012-01-13 08:55:02 -08:00
Pat Hickey 7535c1c3fe ArduCopter test.pde: translate from CH_ to MOT_ notation 2012-01-09 21:57:02 -08:00
Jason Short 8a921e869c Fixed a 1280 only test 2011-12-29 23:02:02 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell 955dfe0226 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell 73e6d5ee11 ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Andrew Tridgell 111d156a99 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Jason Short cc4f5e7c74 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short 85b564c5eb removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Andrew Tridgell 483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed()
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
2011-12-12 15:14:55 +11:00
Pat Hickey 6dbd6b4181 ArduCopter: Get barometer data in terms of AP_Baro interface
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
2011-12-11 15:21:10 -08:00
Randy Mackay fe336fb749 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay 67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short 6dfdd754ea Stability patch updates,
Cleanup
2011-12-06 21:03:56 -08:00
Jason Short 9bc6fce3b8 Function call defs commented with // so the preprocessor doesn't get confused 2011-12-03 17:55:44 -08:00
Jason Short 778393c4a7 Enabled the compass test 2011-12-03 15:39:02 -08:00
Andrew Tridgell 2a5a15abce test: fixed test code for HIL build 2011-11-25 20:00:17 -08:00
Andrew Tridgell 2d8cfc0c3f test: neaten up the output of the dcm test 2011-11-25 20:00:17 -08:00
Pat Hickey 475afd6ac2 purple: enable dcm test, and fixed imu test to test the IMU API 2011-11-25 20:00:17 -08:00
Pat Hickey c2972ff1f9 purple: fixed CLI code for non-ADC hardware and no sonar
purple hardware does not use the ADC driver
2011-11-25 20:00:17 -08:00
Pat Hickey 63393b206a purple: added ins test
this tests the InertialSensor library API
2011-11-25 20:00:17 -08:00
Pat Hickey 4869ac3385 purple: use the new LED_ON/LED_OFF macros for LED level
this gets this right on both APM1 and purple for ArduCopter
2011-11-25 20:00:16 -08:00
Jason Short 10a24f22fa renamed set_cmd function 2011-11-20 00:22:52 -08:00
Jason Short eef04a5a54 removed some tests 2011-11-19 14:02:00 -08:00
Jason Short 833fe17c6a disabled raw GPS temp 2011-11-16 00:22:23 -08:00