Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
29,306 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

55 Commits

Author SHA1 Message Date
Patrick José Pereira 73a76455d2 AP_BattMonitor: Solve typo in BATT2 description 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2017-10-31 09:32:03 +09:00
Francisco Ferreira a83457ab07
AP_BattMonitor: complement commit d3314d7684 by adding to second battery monitor too 2017-06-26 13:41:12 +01:00
fsherratt d3314d7684 AP_BattMonitor: param desc explicitly list Pixhawk 2 PM1 pins 
There is confusion over which pins to use with the pixhawk 2, updated documentation to explicitly state the PM1 pins as being the same as the original pixhawk
 2017-06-24 11:01:03 +09:00
Randy Mackay 7a2d8fd5fd AP_BattMonitor: add has_cell_voltages method 2017-06-06 14:57:04 +09:00
Randy Mackay 6d8dc0fccf AP_BattMonitor: replace int with uint8_t 
non-functional change
 2017-06-06 14:57:04 +09:00
Leonard Hall d5e898156f AP_BattMonitor: allow using resting voltage for failsafe 2017-06-06 14:57:04 +09:00
Leonard Hall 8709fe58ec AP_BattMonitor: resistance learning 2017-06-06 14:57:04 +09:00
Randy Mackay f64777849f AP_BattMonitor: rename VOLT_TIMER to LOW_TIMER 2017-06-06 14:57:04 +09:00
Randy Mackay 989677ddfd AP_BattMonitor: move has_current to backend 2017-06-06 14:57:04 +09:00
Francisco Ferreira 9c027713d1
AP_BattMonitor: update current/voltage parameter documentation 
Remove information for old APM boards
Correct information for The Cube (Pixhawk 2.1) Power2 port
 2017-05-19 01:19:23 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 25cfee9824 AP_BattMonitor: Use SI units conventions in parameter units 
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
 2017-05-17 18:07:25 +10:00
Andrew Tridgell d4e6720b01 AP_BattMonitor: added BATT_VOLT_TIMEO 
this is useful for aircraft with very low C batteries, to prevent a low
voltage failsafe on takeoff. For long endurance aircraft low C batteries
are often used, and the voltage sags a lot on takeoff, but it fine for
the rest of the flight
 2017-04-28 17:40:18 +10:00
Michael du Breuil f919c409bb AP_BattMonitor: Remove redundant state copy 
Every backend stored a instance reference, which wasn't used in most locations
which is redundant given that the state already tracks the instance for us as
well.
 2017-04-28 00:36:10 +01:00
Michael du Breuil 3ab3face9b AP_BattMonitor: SMBus: Read serial number 2017-04-28 00:36:10 +01:00
Michael du Breuil 121ebebfef AP_BattMonitor: Add temperature interface 2017-04-19 14:17:24 +01:00
Michael du Breuil e39ae6d48c AP_BattMonitor: Add cell monitoring 2017-04-19 14:17:24 +01:00
Andre Kjellstrup 94eabed583 AP_BattMonitor: update volt and curr pin param descriptions 2017-04-13 13:30:23 +09:00
Randy Mackay 8c7b214d71 AP_BattMonitor: fix param description 2017-02-15 20:01:59 +10:00
Randy Mackay ebb60e8d2f AP_BattMonitor: remove PX4 driver 2017-02-09 10:45:01 +09:00
Tatsuya Yamaguchi 3e445fd4b8 AP_BattMonitor: add Maxell Battery support 2017-02-09 10:45:00 +09:00
Tatsuya Yamaguchi d30350276c AP_BattMonitor: I2C driver becomes Solo driver 
Rename class to Solo
Use internal I2C bus
Add capacity, current, button press checking
Only check continuously for voltage if reading fails for more than 5 seconds
 2017-02-09 10:44:50 +09:00
murata c808ee2f49 Global: To nullptr from NULL. 
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
 2016-11-02 16:04:47 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
floaledm ec157bd4c2 AP_BattMonitor: Get pack_capacity_mah function 2016-08-25 10:16:18 +10:00
Tom Pittenger 5108b4cbb6 AP_BattMonitor: move vehicle dependant code to be c-file only, not header 2016-07-25 18:10:57 -07:00
Lucas De Marchi 64d17702e6 AP_BattMonitor: AP_BattMonitor_SMBus: fix after conversion to I2CDevice 
- Fix bus number
    - Minor updates to coding style
 2016-07-22 13:10:51 -03:00
Luiz Ywata 0cf4353382 AP_BattMonitor: AP_BattMonitor_SMBus: use I2CDevice interface 2016-07-22 13:10:51 -03:00
Andrew Tridgell 39dac57b56 AP_BattMonitor: support Disco battery monitoring 2016-07-20 13:38:17 +10:00
Tom Pittenger a1564bd337 AP_BattMonitor: check actual battery instances instead of max possible instances 2016-06-02 16:59:21 -07:00
Tom Pittenger 0e775f595d AP_BattMonitor: make param BATT_WATT_MAX plane only 2016-04-21 13:59:45 -07:00
Tom Pittenger 035f3b16a1 AP_BattMonitor: add new param BATT_WATT_MAX 
Description: If battery wattage (voltage * current) exceeds this value then the system will reduce max throttle (THR_MAX and TKOFF_THR_MAX) to satisfy this limit. This helps limit high current to low C rated batteries regardless of battery voltage. The max throttle will slowly grow back to THR_MAX (or TKOFF_THR_MAX) if demanding the current max and under the watt max.
 2016-03-02 10:14:25 -08:00
Jonathan Challinger 8fdbb36827 AP_BattMonitor: add is_powering_off 2016-01-07 15:14:07 +09:00
Caio Marcelo de Oliveira Filho 9eb945d24f AP_BattMonitor: use millis/micros/panic functions 2015-11-20 12:29:45 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM 
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
 2015-10-30 14:35:16 +09:00
Randy Mackay bb891a62d3 BattMonitor: fix parameter descriptions 2015-08-26 11:17:48 +09:00
Randy Mackay 3dfb447fd7 BattMon: has_current true for Bebop 
The bebop does not actually provide current but it does estimate the
percentage of battery remaining
 2015-07-23 21:49:32 +09:00
Randy Mackay 8403b504d1 BattMon: add Bebop to monitor param description 2015-07-23 21:49:32 +09:00
Randy Mackay 9482578c60 BattMon: Bebop always uses bebop batt monitor 2015-07-23 21:49:31 +09:00
Jean-Baptiste Dubois 35ae562dbe AP_BattMonitor: Add battery support for Bebop Hardware 2015-07-23 21:49:27 +09:00
Randy Mackay c6440a48b3 BattMon_Backend: add init and set_capacity methods 2015-04-11 14:10:19 +09:00
Randy Mackay 5ba1b20d3b BattMon: add SMBus to MONITOR param description 2015-01-02 17:20:05 +09:00
Randy Mackay aecc8aac1f BattMon: correct typo in monitor type enum 2014-12-31 15:22:57 +09:00
Randy Mackay 76a28a962c BattMon: remove #defines for monitor type 2014-12-31 15:22:47 +09:00
Randy Mackay eec66d8451 BattMon: parent class becomes frontend class 2014-12-31 15:22:42 +09:00
Randy Mackay 45e0e48e54 BattMon: minor param description update 2014-10-14 12:42:45 +09:00
Andrew Tridgell ab6302540d AP_BattMonitor: added 2nd battery voltage monitoring 2014-08-09 22:50:14 +10:00
Randy Mackay d09fd0d035 BattMonitor: add @Increment to CAPACITY description 2013-10-29 11:23:27 +09:00
Craig3DRobotics e5501bf911 AP_BattMonitor: Updated parameter descriptions 2013-10-09 15:33:03 -07:00
Andrew Tridgell cd65e2109d AP_BattMonitor: fixed type in docs 2013-10-10 07:22:05 +11:00
Randy Mackay 9aea577eb1 BattMonitor: correct default pins for PX4 2013-10-08 10:28:48 +09:00