3cf5abcd23
hack to fix Motor lights when arming after init.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3101 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:56:31 +00:00
96d6c01bdc
hack to fix Motor lights when arming after init.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3100 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:54:29 +00:00
c7f731502b
Added experimental rate based Loiter and revised RTL. You need to compile with the loiter option set to 1 in APM_Config to try.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3099 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:18:32 +00:00
f2a4b181bf
cleared out APM_Config
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3098 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:15:42 +00:00
9336fa9bd1
upped D filter to 6
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3096 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 05:44:29 +00:00
a25b0afb67
removed throttle_slew - Just wasn't working well enough and added too much complexity
...
moved reading sonar to the 50hz loop so the Mode filter could do it's thing without causing so much latency
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3094 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 02:30:37 +00:00
2bfaf2744f
lowered error limit to try and reduce RTL dropping from sky.
...
removed minimum for RTL nav speed to see it's Loiter potential (rate based Loiter)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3093 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:51:35 +00:00
66af7cd216
commented out home.alt since it's always 0
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3092 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:49:20 +00:00
0d21177aa7
fixed missing %d in CTUN
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3091 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:45:00 +00:00
eb8de79be4
Compass: added a gain multiplier
...
this adjusts the calibration based on the change in gain between
calibration and runtime
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3090 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 10:39:11 +00:00
b1d47ef135
TradHeli - fixes to use single PI controller for roll, pitch and yaw (when using an external tail gyro)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3089 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 09:37:01 +00:00
69b6e5225a
added SET_MAG_OFFSETS magnetometer message
...
this allows reset of the mag offsets without wiping your EEPROM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3088 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 09:00:21 +00:00
32c576f28c
Compass: several fixes to compass calibration code
...
this changes the calibration code to require at least 5 good reads
from the compass during initialisation. The calibration is taken as
the average of the 5 values.
This also fixes the expected values for the 3 axes for the 5883 to
match reality.
We also save a bit of code space by adding a common rotate_for_5883L()
routine.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3087 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 08:17:25 +00:00
5ffd66bc83
MAVLink: added missing files from recent update
...
thanks to Randy for spotting this
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3086 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 06:30:29 +00:00
1989497ae9
we don't have a separate 5883L driver any more
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3085 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 06:30:13 +00:00
b9486cebad
Compass: we don't need MAG_PROTOCOL any more
...
we only have one mag driver now
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3084 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 05:10:19 +00:00
9232a0f652
Compass: removed the old 5883L driver
...
we now use a single driver for both mags
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3083 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 05:09:58 +00:00
1dcd7a358e
PID: fixed an uninitialised variable
...
we did not initialise derivative to zero
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3082 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:46:21 +00:00
92822dbd6b
ModeFilter: fixed a shadowed variable
...
mode is a member of the class already, so call the local variable
fmode
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3081 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:46:10 +00:00
6205752740
MAVLink: pull in latest changes from upstream MAVLink
...
this gives us the new SENSOR_OFFSETS message for debugging sensor
calibration
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3080 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:45:48 +00:00
1d9bc92d41
Added a generic Sin and Cos look table. Not sure if it works yet as a library.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3075 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-11 22:31:15 +00:00
4f099ae158
cope with double initialisation of the compass
...
if we've already initialised, then the orientation matrix will already
be right
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3072 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 14:07:15 +00:00
19d2195ea3
compass: set the orientation of compass before compass.init()
...
the compass.init() code uses the orientation when calculating the
calibration. We need to use the right orientation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3071 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:52:53 +00:00
2995878e99
compass: add a small delay in compass init
...
this adds a 50ms delay after setting the compass gains before reading
the compass. Added as paranoia after some strange results on a 5843
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3070 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:47:25 +00:00
3a222a9fa2
2.0.39
...
added callback to the test functions… not sure if this is the correct thing to do.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3050 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 22:20:50 +00:00
509447904e
2.0.39
...
Change the way Rate nav works. we now take into account both forward *and lateral* rates. The signs may be backward so be careful! Let me know if the quad shoots off to one side and I'll flip the signs.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3049 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 16:54:56 +00:00
998b00693c
AP_OpticalFlow - small but important fixes for position calcs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3040 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:19:18 +00:00
9b9402a264
ACM - changed default lens for optical flow
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3039 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:15:19 +00:00
22d6499ef7
perl version of eedump
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3037 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 10:36:31 +00:00
1e48fd8952
2.0.39
...
added a define to make compilation optional
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3031 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 17:09:27 +00:00
2129194338
2.0.39
...
Cleanup and removed some old tests to save data flash.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3030 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:47:44 +00:00
7c8b0ea9bf
2.0.39
...
Moved the motors based on feedback from Max Levine. See Wiki for details.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3029 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:46:46 +00:00
f27929bf78
2.0.39
...
Simplified the CUT_MOTORS section of the code.
Added Stability patch
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3028 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:45:51 +00:00
edc35b2cee
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3027 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:42 +00:00
25e129fb05
2.0.39
...
New order for motors!! Based on Hein's testing. See Wiki for updated layouts
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3026 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:22 +00:00
1cda03037c
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3025 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:44 +00:00
254674aedd
2.0.39
...
New hex a motors_out with Tridge's stability patch.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3024 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:16 +00:00
1316b58ef0
2.0.39
...
added defines for CH7 behavior - DO_FLIP 1, DO_SET_HOVER 0 (Default)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3023 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:22:43 +00:00
834de9f6c7
2.0.39
...
added defines for CH7 behavior
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3022 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:55 +00:00
6748ffd112
2.0.39
...
added defines for CH7 behavior, Tweaked Loiter config based on testing by Jack.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3021 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:21 +00:00
10e2eb3571
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3020 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:19:06 +00:00
a78b057cec
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3019 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:17:26 +00:00
1e4f463298
Updated GCS_MAVLink to match mavlink master.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3017 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 08:18:08 +00:00
43fd56ec46
TradHeli - mounting plate correction to remove duplicate line in design file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3006 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-03 11:40:46 +00:00
b062e8e6f8
fixed PSTR() on motor arm messages
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3004 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:34:27 +00:00
4dc9de81a3
re-added ARMING messages in HIL mode
...
this is useful as in HIL mode you don't always have blinking lights
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3003 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:25:58 +00:00
07b8d0dfe5
2.0.39
...
Returned to previous log version for sonar messages to fix the cosmetic bug in the planner
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3000 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:01:25 +00:00
6c75a03230
2.0.39
...
Made the Yaw on RTL always on for Helis
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2999 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:00:26 +00:00
10d769a1d2
2.0.39
...
Defaulted all values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2998 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 21:56:22 +00:00
12785f6682
added SERIAL3_BAUD parameter
...
this is the real baud rate divided by 1000. So 57600 is set as 57
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2997 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 11:39:17 +00:00
jasonshort
tridge60@gmail.com
rmackay9@yahoo.com
mich146@hotmail.com
james.goppert