Peter Barker
d78ea08d24
AP_AHRS: move AP_AHRS_SIM::get_results into backend file
2023-01-17 10:49:56 +11:00
Iampete1
722ec745e9
AP_BattMoniter: don't allow equal low and critical FS thresholds
2023-01-17 10:36:09 +11:00
Andrew Tridgell
ffb6a9fb7f
AP_OpenDroneID: set EMERGENCY status on crash or chute deploy
...
RemoteID modules are required to set EMERGENCY status on uncontrolled
descent or crash. This fixes our implementation to do that, either via
existing vehicle crash checking code or via a parachute release
2023-01-17 10:31:26 +11:00
chobits
f467acbe92
AP_HAL_ChibiOS: no dma for unused kakuteh7 uart2
2023-01-17 10:24:42 +11:00
Henry Wurzburg
71099c881d
AP_Scripting: add error check to mission_load.lua
2023-01-17 10:24:08 +11:00
Henry Wurzburg
8865d79015
AP_Mission: add error check to mission_load.lua
2023-01-17 10:24:08 +11:00
Henry Wurzburg
c8617ccf01
AP_Scripting:Add mission to Script_Controller and improve
2023-01-17 10:24:08 +11:00
Henry Wurzburg
8806088404
Tools: make MAG params consistent names
2023-01-17 08:45:30 +11:00
Henry Wurzburg
509d4b7fbf
SITL:make MAG1 param consistent names
2023-01-17 08:45:30 +11:00
Andrew Tridgell
12c24df476
AP_HAL_SITL: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
deb86be1da
AP_HAL_Linux: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
13cbccc016
AP_HAL: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
e255bbbd40
AP_HAL_ESP32: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
365de4b505
AP_HAL_ChibiOS: added old_size to heap_realloc
2023-01-16 09:19:16 +11:00
Andrew Tridgell
b45be75a98
AP_Scripting: use MultiHeap class
2023-01-16 09:19:16 +11:00
Andrew Tridgell
22a16f9672
AP_Common: added MultiHeap class
...
for scripting allocation with multiple heaps
2023-01-16 09:19:16 +11:00
Henry Wurzburg
e96a55c1b6
SITL:add SIM param metadata
2023-01-15 21:58:12 +11:00
Andrew Tridgell
a2b0bbffdb
HAL_SITL: implement SIM_UART_LOSS
2023-01-15 21:57:15 +11:00
Andrew Tridgell
d3ea7b0ca6
SITL: added SIM_UART_LOSS parameter
2023-01-15 21:57:15 +11:00
Andrew Tridgell
dfdecc52c4
GCS_MAVLink: fixed FTP terminate session error
...
this caused ftp downloads to intermittently fail. The cause is the FTP
client may ask for a session terminate and then immediately afterwards
a ftp open. The open would fail as the ftp session was considered
active
2023-01-15 21:57:15 +11:00
Andrew Tridgell
9b2c7a90e7
Plane: fixed loiter.direction for VTOL approach
...
ensure the direction is setup correctly for both CW and CCW
2023-01-15 21:32:27 +11:00
Peter Barker
2b2bd2b85b
autotest: add a test for VTOL land spiral code
2023-01-15 21:32:27 +11:00
Andrew Tridgell
77e63da4b3
Plane: added TKOFF_THR_MAX_T
...
time for max throttle on takeoff if no airspeed sensor
2023-01-15 12:17:27 +11:00
Andrew Tridgell
abb3cdd6b8
AP_TECS: added max throttle time for takeoff with no airspeed sensor
2023-01-15 12:17:27 +11:00
Andrew Tridgell
d15c5ce233
AP_Vehicle: added takeoff_throttle_max_t for fixed wing
2023-01-15 12:17:27 +11:00
Peter Barker
ea167d5bd8
autotest: create fresh fly_mission suitable for other missions
...
the fly_mission in quadplane was very-much Dalby-specific
2023-01-15 10:16:17 +11:00
Peter Barker
b441c24eaa
autotest: use percentage error when determining if z is preserved
...
floating point storage means an absolute error doesn't work
2023-01-14 23:23:29 +11:00
Peter Barker
08f652fe2c
AP_HAL_ChibiOS: ignore array bounds check while checking 0x0 for writes
...
Fixes compiler error on g++ 12
../../libraries/AP_HAL_ChibiOS/Scheduler.cpp:568:20: error: array subscript 0 is outside array bounds of 'const uint8_t [0]' [-Werror=array-bounds]
568 | if (addr0[i] != 0) {
2023-01-12 23:30:15 +11:00
Peter Barker
bba5b34c1e
Copter: remove FS_OPTIONS parameter conversion
...
This code is in 4.0.7 but not 3.6.11 - i.e. after this someone upgrading from 3.6 to master (and presumably 4.4) won't get this conversion done.
This conversion is flawed in that someone configuring a default for a parameter in a configuration file will have that value over-ridden by this code.
2023-01-12 20:33:43 +11:00
Peter Barker
52f6810d50
Tools: param_parse.py: sort SIM_ parameters into the output files
...
primarily to make the Wiki look nicer
2023-01-12 13:46:22 +11:00
Peter Barker
c42754b691
AP_AHRS: create an AP_AHRS_SIM backend
2023-01-12 13:11:40 +11:00
Henry Wurzburg
c79672b96c
SITL: add SITL param metadata and fix a few
2023-01-12 09:19:27 +11:00
Peter Barker
9cb3bfbe05
AP_HAL_ChibiOS: disable batch sampler on SkyViper-v2450
...
saves ~1.8kB
2023-01-11 19:08:41 +11:00
Peter Barker
e5c3dd871c
AP_InertialSensor: create explicit define for AP_INERTIALSENSOR_BATCHSAMPLER_ENABLED
...
this allows the batch sampler to be removed for size reasons, or because you don't have logging enabled
2023-01-11 19:08:41 +11:00
Andy Piper
c620ba58df
AP_Motors: use _dt instead of loop rate for throttle slew calculation
2023-01-11 18:59:52 +11:00
Andy Piper
80fb33fb8b
AP_AHRS: add throttle slew to RATE
...
log PD scaling values
2023-01-11 18:59:52 +11:00
Andy Piper
53b7f96a5d
AC_AttitudeControl: boost PD on roll and pitch when slew limit is hit
...
boost angle P when slew limit is hit
move to a single parameter for thrust-gain boosting
add PD scaling support
2023-01-11 18:59:52 +11:00
Andy Piper
f3ecb4ee6c
AC_PID: support PD boosting
2023-01-11 18:59:52 +11:00
Andy Piper
d1b272fab7
autotest: anti-gravity test using THR_G_BOOST boost
2023-01-11 18:59:52 +11:00
Andy Piper
ad94c5cab1
AP_Motors: calculate throttle slew rate
...
use derivative filter and apply filtering to slew detector
2023-01-11 18:59:52 +11:00
Andy Piper
9caf94b5e4
AP_HAL_ChibiOS: simple conversion tool for betaflight pin definitions
2023-01-11 18:57:33 +11:00
Andy Piper
13a55c9109
bootloaders: bootloader for FoxeerH743v1
2023-01-11 18:57:33 +11:00
Andy Piper
094a52e433
AP_HAL_ChibiOS: FoxeerH743 hwdef
2023-01-11 18:57:33 +11:00
Andy Piper
5b7f961cda
AP_Bootloader: add FoxeerH743v1 to board types
2023-01-11 18:57:33 +11:00
Iampete1
15daff879e
AP_Param: add shared Info defines
2023-01-11 18:41:34 +11:00
Iampete1
d82f79b492
Tools: Replay: use shared Param info defines
2023-01-11 18:41:34 +11:00
Iampete1
43e5ea43b7
Tools: AP_Periph: use shared Param info defines
2023-01-11 18:41:34 +11:00
Iampete1
ee2e711fe3
Rover: use shared param info defines
2023-01-11 18:41:34 +11:00
Iampete1
010144b2bd
Blimp: use shared param info defines
2023-01-11 18:41:34 +11:00
Iampete1
30ba68e5c7
ArduSub: use shared param info defines
2023-01-11 18:41:34 +11:00