1d9bc92d41
Added a generic Sin and Cos look table. Not sure if it works yet as a library.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3075 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-11 22:31:15 +00:00
4f099ae158
cope with double initialisation of the compass
...
if we've already initialised, then the orientation matrix will already
be right
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3072 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 14:07:15 +00:00
19d2195ea3
compass: set the orientation of compass before compass.init()
...
the compass.init() code uses the orientation when calculating the
calibration. We need to use the right orientation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3071 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:52:53 +00:00
2995878e99
compass: add a small delay in compass init
...
this adds a 50ms delay after setting the compass gains before reading
the compass. Added as paranoia after some strange results on a 5843
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3070 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:47:25 +00:00
3a222a9fa2
2.0.39
...
added callback to the test functions… not sure if this is the correct thing to do.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3050 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 22:20:50 +00:00
509447904e
2.0.39
...
Change the way Rate nav works. we now take into account both forward *and lateral* rates. The signs may be backward so be careful! Let me know if the quad shoots off to one side and I'll flip the signs.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3049 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 16:54:56 +00:00
998b00693c
AP_OpticalFlow - small but important fixes for position calcs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3040 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:19:18 +00:00
9b9402a264
ACM - changed default lens for optical flow
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3039 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:15:19 +00:00
22d6499ef7
perl version of eedump
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3037 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 10:36:31 +00:00
1e48fd8952
2.0.39
...
added a define to make compilation optional
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3031 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 17:09:27 +00:00
2129194338
2.0.39
...
Cleanup and removed some old tests to save data flash.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3030 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:47:44 +00:00
7c8b0ea9bf
2.0.39
...
Moved the motors based on feedback from Max Levine. See Wiki for details.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3029 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:46:46 +00:00
f27929bf78
2.0.39
...
Simplified the CUT_MOTORS section of the code.
Added Stability patch
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3028 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:45:51 +00:00
edc35b2cee
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3027 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:42 +00:00
25e129fb05
2.0.39
...
New order for motors!! Based on Hein's testing. See Wiki for updated layouts
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3026 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:22 +00:00
1cda03037c
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3025 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:44 +00:00
254674aedd
2.0.39
...
New hex a motors_out with Tridge's stability patch.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3024 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:16 +00:00
1316b58ef0
2.0.39
...
added defines for CH7 behavior - DO_FLIP 1, DO_SET_HOVER 0 (Default)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3023 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:22:43 +00:00
834de9f6c7
2.0.39
...
added defines for CH7 behavior
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3022 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:55 +00:00
6748ffd112
2.0.39
...
added defines for CH7 behavior, Tweaked Loiter config based on testing by Jack.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3021 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:21 +00:00
10e2eb3571
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3020 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:19:06 +00:00
a78b057cec
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3019 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:17:26 +00:00
1e4f463298
Updated GCS_MAVLink to match mavlink master.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3017 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 08:18:08 +00:00
43fd56ec46
TradHeli - mounting plate correction to remove duplicate line in design file
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3006 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-03 11:40:46 +00:00
b062e8e6f8
fixed PSTR() on motor arm messages
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3004 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:34:27 +00:00
4dc9de81a3
re-added ARMING messages in HIL mode
...
this is useful as in HIL mode you don't always have blinking lights
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3003 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:25:58 +00:00
07b8d0dfe5
2.0.39
...
Returned to previous log version for sonar messages to fix the cosmetic bug in the planner
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3000 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:01:25 +00:00
6c75a03230
2.0.39
...
Made the Yaw on RTL always on for Helis
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2999 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:00:26 +00:00
10d769a1d2
2.0.39
...
Defaulted all values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2998 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 21:56:22 +00:00
12785f6682
added SERIAL3_BAUD parameter
...
this is the real baud rate divided by 1000. So 57600 is set as 57
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2997 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 11:39:17 +00:00
261c7edec9
MAVLink: send streams on both mavlink interfaces
...
when doing init the user may be on the Xbee port
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2996 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 10:08:59 +00:00
5f9c03ca77
re-apply DEFAULT_LOG_BITMASK patch
...
Jason, I assume you removed this patch accidentially
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2995 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 10:06:15 +00:00
022314ed4c
process MAVLInk packets during gps detection and IMU calibration
...
this allows the GCS to connect immediately on startup
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2994 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 08:08:52 +00:00
1e915aae2b
2.0.39
...
Added reset for all nav I when entering manual modes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2992 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 05:12:10 +00:00
d70055398b
2.0.39
...
Added extra groundstart init for the Ground Station
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2991 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 04:47:15 +00:00
cdfa3b07cb
2.0.39
...
Changed how the throttle_slew was added to the output.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2990 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:48:16 +00:00
a0f61fd29e
2.0.39
...
Added a limiter to Throttle_slew to not make the throttle go past 800.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2989 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:39:44 +00:00
f951ffb602
IMU: fixed HIL init with callback
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2988 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 23:35:37 +00:00
22b5eb4273
GPS: added delay hook for GPS detection
...
this allows for MAVLink to be up during GPS detection
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2987 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:37 +00:00
28cf3dfc79
IMU: added delay callback hooks to IMU initialisation
...
this allows the imu init() call to use a custom replacement for
delay(), which will allow for the processing of MAVLink packets during
IMU initialisation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2986 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:25 +00:00
f04436e68b
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2985 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:09:27 +00:00
cc054a7fac
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2984 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:06:36 +00:00
738d5db914
2.0.39
...
limit RTL to 35°
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2983 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:57:35 +00:00
05122be463
2.0.39
...
small change to RTL to prevent negative effects from flying backwards.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2982 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:42:07 +00:00
b2a47c01a7
small change to RTL to prevent negative effects from flying backwards.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2981 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:41:11 +00:00
f096d8cb23
OpticalFlow - add check to see if sensor has initialised correctly.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2974 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 04:31:36 +00:00
bcc7bed491
fix hil build
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2970 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 01:24:20 +00:00
e63fc0fe68
removed scaling on control in because it might cause rounding issues.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:48:38 +00:00
e32f8057bb
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2968 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:34:25 +00:00
82e51aec82
Big update 2.0.38
...
moved ground start to first arming
added ground start flag
moved throttle_integrator to 50hz loop
CAMERA_STABILIZER deprecated - now always on
renamed current logging bit mask to match APM
added MA filter to PID - D term
Adjusted PIDs based on continued testing and new PID filter
added MASK_LOG_SET_DEFAULTS to match APM
moved some stuff out of ground start into system start where it belonged
Added slower Yaw gains for DCM when the copter is in the air
changed camera output to be none scaled PWM
fixed bug where ground_temperature was unfiltered
shortened Baro startup time
fixed issue with Nav_WP integrator not being reset
RTL no longer yaws towards home
Circle mode for flying a 10m circle around the point where it was engaged. - Not tested at all! Consider Circle mode as alpha.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2966 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:42:54 +00:00
jasonshort
tridge60@gmail.com
rmackay9@yahoo.com
mich146@hotmail.com
james.goppert