Andrew Tridgell
1ccff12b54
SITL: added SIM_ENGINE_MUL
...
this allows for simulated engine failures
2012-08-17 14:22:08 +10:00
Jason Short
ebd399d11f
ACM : APM_Config.h : default removed for toy mixer.
2012-08-16 15:41:35 -07:00
Jason Short
cd2cf2e431
ACM: Config.h - added default for toy mixer
2012-08-16 15:40:28 -07:00
Jason Short
cbf4870b00
ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP
2012-08-16 15:39:50 -07:00
Jason Short
bd17c23e7e
ACM : Upped Yaw Limit to 2200
2012-08-16 15:38:46 -07:00
Jason Short
7ac4d06d3f
ACM: made target bearing the lead filtered location
...
Had some major nav trouble from crosstrack if I used the laggy position.
2012-08-16 15:38:25 -07:00
Jason Short
ff32718d9b
Dataflash fix for missing card error
2012-08-16 15:37:28 -07:00
Jason Short
0e7794336e
ACM: added nav_yaw to att logging
...
Removed unnecessary casting
2012-08-16 12:43:55 -07:00
Michael Oborne
90ccb6f3ef
Mission Planner 1.2.6
...
add tracker location option.
fix current sensor screen
add more right click flight planner options.
make some connecting error messages more detailed.
add partial microdrones protocol output
2012-08-16 21:07:29 +08:00
rmackay9
48b7d26c5d
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
rmackay9
5f2c662fc9
ArduCopter: replaced abs with labs as required in a few places.
...
Also fixed a small bug in the get_stabilize_pitch function in which it was using the roll (instead of pitch) to decide whether it should let the i term build-up or not.
2012-08-16 17:51:09 +09:00
Andrew Tridgell
faeb206239
SITL: make abs() 16 bit in SITL
...
this will help us find abs() bugs in autotest
2012-08-16 15:18:17 +10:00
Andrew Tridgell
50e2458df0
math: more abs() fixes
...
abs() is 16 bit
2012-08-16 15:17:42 +10:00
Jason Short
e2c3149b2f
Location Lib : Abs was overflowing causing bad comparison
2012-08-15 22:01:51 -07:00
Jason Short
67de828bcc
ACM Test: Added a return statement
2012-08-15 21:37:23 -07:00
Jason Short
555e26d5fa
Location Lib. Potential fix for bad angle and distance calcs.
...
last_lat changed to int32_t since it can be negative.
2012-08-15 21:36:55 -07:00
Jason Short
93c644fd0f
ACM : Test for bearing calc
2012-08-15 21:04:24 -07:00
Jason Short
fd76bf7df4
ACM Log : fixed formatting
2012-08-15 21:04:24 -07:00
Jason Short
a6b874b591
DataFlash : Removed Chip Erase - relying on Block erase only
2012-08-15 21:04:24 -07:00
Jason Short
44b715af9b
Dataflash Logs : Fixed block erase on APM2
...
Byte order for 512 vs 528 was reversed.
2012-08-15 21:04:24 -07:00
Andrew Tridgell
9c3c1c4f54
APM: fixed hil build
2012-08-16 12:53:37 +10:00
Andrew Tridgell
5ebcf425cf
APM: allow telemetry send during parameter and waypoint fetch
...
this slows down telemetry by a factor of 4 during parameter or
waypoint transmit. That ensures that mode changes and gps position are
still updated during a long parameter fetch
2012-08-16 10:50:12 +10:00
Andrew Tridgell
0a7d8a4933
MAVLink: enable fetching of single parameters
...
this makes it possible for the GCS to fetch a single parameter by
name, which is useful for parameters that change in flight
2012-08-16 10:14:46 +10:00
Andrew Tridgell
41a974683e
Quaternion: we no longer support acceleration in the GPS driver
...
remove the linear acceleration compensation code
2012-08-15 20:07:53 +10:00
Andrew Tridgell
79aae2114c
GPS: support getting raw velocity values from a UBlox
...
this may give better velocity numbers than the value from COG
2012-08-15 20:06:35 +10:00
Andrew Tridgell
a1107602e9
APM: allow for separate calibration of airspeed/barometer
...
this is useful just before takeoff, to account for temperature changes
2012-08-15 19:49:09 +10:00
Andrew Tridgell
efee2b1557
APM: added LAND_FLARE_ALT and LAND_FLARE_SEC
...
these allow you to configure the altitude and time before touchdown to
flare the plane and lock the heading. Useful on larger planes.
2012-08-15 18:11:16 +10:00
Andrew Tridgell
455e088c9f
APM: rename RDRSTEER to WHEELSTEER
...
thanks to Jon for the suggestion
2012-08-15 16:28:59 +10:00
Andrew Tridgell
c652538516
APM: use AHRS position for geo-fence
...
this allows it to take account of dead-reckoning
2012-08-15 14:31:10 +10:00
Andrew Tridgell
3f76a4cc61
SITL: use rudder steering in APM autotest
2012-08-15 12:53:05 +10:00
Andrew Tridgell
20be77ab32
APM: when land_complete is true, use land_pitch
...
this gives a flare on final landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
b8521ff9ae
APM: reload airspeed and throttle after landing
...
this allows for restarting a mission after landing with reasonable
airspeed values
2012-08-15 12:39:35 +10:00
Andrew Tridgell
f4023d1b44
AP_Airspeed: remove airspeed filter and run at 10Hz
...
this saves on the filter memory, and gives just as good a result
2012-08-15 12:39:35 +10:00
Andrew Tridgell
a361a3aebd
AP_AnalogSource: make read_average() return a float
...
this allows it to take advantage of better than 1 bit resolution by
averaging
2012-08-15 12:39:35 +10:00
Andrew Tridgell
4b5d98e65b
APM: added RDRSTEER_ PID for steering on ground
...
this allows for rolling takeoff with steering, and use of rudder in
landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
ce5f3dcfe2
APM: report speed changes via MAVLink
2012-08-15 12:39:35 +10:00
Andrew Tridgell
1b152ef9e0
APM: implement FENCE_ACTION_REPORT
...
when FENCE_ACTION is set to FENCE_ACTION_REPORT a fence breach is
reported, but the flight mode is not changed
2012-08-15 12:39:35 +10:00
Andrew Tridgell
7bb8fa1e58
MAVLink: added FENCE_ACTION_REPORT
2012-08-15 12:39:35 +10:00
Andrew Tridgell
44852276da
AHRS: added ahrs.yaw_initialised()
...
this allows the high level code to know if the AHRS driver has a
reliable yaw estimate
2012-08-15 12:39:34 +10:00
Andrew Tridgell
90bf9c62bb
SITL: added a test script for starting in Kingaroy
...
we use this for OBC testing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
8c3b6f471f
APM: keep the time of the last heartbeat message
...
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
b54ab2d72a
APM: expose change_command() and geofence_breached() to libraries
...
this makes a failsafe library easier
2012-08-15 12:39:34 +10:00
Andrew Tridgell
dd17302def
APM: show waypoint number in jump message
2012-08-15 12:39:34 +10:00
Andrew Tridgell
c525b6b997
APM: minor formatting fix
2012-08-15 12:39:34 +10:00
Andrew Tridgell
b018d7ba77
SITL: make it easier to start ArduPlane SITL at any location
...
this generates a jsbsim startup XML file from a template
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f45f232f
APM: added 'OBC' failsafe module for ArduPlane
...
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.
This includes:
- manual pin
- heartbeat pin
- waypoint for heartbeat failure
- waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Andrew Tridgell
98015636d9
APM: interpret zero lat/lng as being current location
...
this makes it easy to have a "loiter in current position" mission
element
2012-08-15 12:39:34 +10:00
Andrew Tridgell
98d5a49717
APM: fixed LOITER_TIME and LOITER_TURNS
...
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell
26749a7486
Failsafe: only read RC on new data
2012-08-15 12:39:33 +10:00
Andrew Tridgell
9c19ff1a2c
Failsafe: added COMPETITION_MODE
2012-08-15 12:39:33 +10:00