Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
17,488 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

17488 Commits

Author SHA1 Message Date
Robert Lefebvre 1424b17a83 AP_Motors_Heli: Change default RSC_SETPOINT to 700 2015-05-29 17:46:25 +09:00
Robert Lefebvre 4da54783fd AC_AttitudeControl_Heli: Semantic Change. Motor Runup to Rotor Runup. 2015-05-29 17:46:23 +09:00
Robert Lefebvre 80b4ca99f8 Copter: Heli Semantic Change. Motor Runup to Rotor Runup. 2015-05-29 17:46:20 +09:00
Robert Lefebvre d24664ccf9 AP_MotorsHeli: Semantic change. Motor Runup to Rotor Runup 2015-05-29 17:46:18 +09:00
Robert Lefebvre db3852522f Copter: Arming failures should say Collective not Throttle for Tradheli. 
Referring to Collective Pitch as Throttle is confusing for helicopter users as the throttle is really on the motor and not the "throttle stick".
 2015-05-29 17:46:16 +09:00
Robert Lefebvre 112fef4825 Copter: Change Tradheli arming failure message. 
"stop rotor spinning" is not a good indication of what the problem really is.  The user needs to understand they must switch off the rotor speed control switch.  I would prefer to say "Rotor Speed Control Engaged" but we are limited in message length.
 2015-05-29 17:46:13 +09:00
Robert Lefebvre a8c4274db4 Copter: Tradheli: eliminate motors.set_dt 2015-05-29 17:46:12 +09:00
Robert Lefebvre 65ca09600c AP_Motors: Heli eliminate _dt member and fix rsc_runup calculation 2015-05-29 17:46:09 +09:00
Robert Lefebvre bc23ea4633 Copter: Comment change, main loop time to 400Hz. 2015-05-29 17:46:07 +09:00
Robert Lefebvre 18bac524a3 Copter: TradHeli, change Rate FF LPF to 10Hz 2015-05-29 17:46:05 +09:00
Andrew Tridgell 337cd3d4a7 autotest: allow RebootRequired keyword in autodocs 2015-05-29 16:35:33 +10:00
Andrew Tridgell 9b77260ebb Plane: disable PID logging on APM2 2015-05-29 16:32:05 +10:00
Andrew Tridgell f39063e023 DataFlash: don't do PID logging on APM2 2015-05-29 16:32:05 +10:00
Randy Mackay 19b021f729 RCMap: added RebootRequired param description 2015-05-28 19:32:38 +09:00
svefro b02bbcd289 RCMap: added Reboot required to rcmap parameter descriptions 
Added Reboot required to rcmap throttle, yaw, pitch, roll
 2015-05-28 19:32:20 +09:00
Andrew Tridgell b27d0a6525 Replay: handle replay on older logs 
we now pass-thru all messages except those that are being generated by
replay. We also pass-thru the FMT headers for those messages
 2015-05-28 13:30:38 +10:00
Andrew Tridgell 22ce36fc8b build: make px4-clean depend on px4-cleandep 2015-05-28 13:30:38 +10:00
Andrew Tridgell 2007d2b6eb Replay: cope with FRAM messages 
use them to trigger ahrs updates
 2015-05-28 13:30:37 +10:00
Randy Mackay 6b65aa465b Copter: pre-arm checks ignore unused compasses 2015-05-28 12:16:50 +09:00
Andrew Tridgell b6eba0842a DataFlash: fixed CAM message format 2015-05-27 22:10:39 +10:00
Andrew Tridgell 00ca493860 AP_AHRS: prevent a floating exception in update_trig 2015-05-27 22:10:39 +10:00
Randy Mackay b121d83beb RC_Channel: add EPM, LandingGear to FUNCTION param description 2015-05-27 18:05:01 +09:00
Randy Mackay 17063792cb Copter: deploy gear during mission RTL descent 2015-05-27 16:10:58 +09:00
Andrew Tridgell 8454246fae AP_Param: make it safe to change the type of a parameter 
if the type is changed then the value will revert to its default value
 2015-05-27 15:29:40 +10:00
Andrew Tridgell 2f5ade4810 Plane: use 16 bit mask for GCS_PID_MASK 2015-05-27 15:09:47 +10:00
Andrew Tridgell 1792710f41 Copter: added a bit in LOG_BITMASK for PID logging 2015-05-27 15:09:47 +10:00
Andrew Tridgell 95ff71940c DataFlash: fixed rebase errors 2015-05-27 14:28:50 +10:00
Andrew Tridgell 08f8355dd0 Copter: added logging of Z accel PID 2015-05-27 14:28:50 +10:00
Andrew Tridgell 8f34ed5b76 DataFlash: added PIDA message 
for logging Z accel PID in copter
 2015-05-27 14:28:50 +10:00
Andrew Tridgell cdea9be9bb Copter: added PID_TUNING for accel controller 2015-05-27 14:28:49 +10:00
Andrew Tridgell a57889e3b0 GCS_MAVLink: re-generate headers 2015-05-27 14:28:49 +10:00
Andrew Tridgell 0ed7fda41d GCS_MAVLink: added ACCZ and STEER PID_TUNING axes 2015-05-27 14:28:49 +10:00
Andrew Tridgell 521dae1c65 AC_AttitudeControl: use set_desired_rate() on PID controllers 
this sets them up for logging of PIDs
 2015-05-27 14:28:49 +10:00
Andrew Tridgell 3ec8857fbc AC_PID: added set_desired_rate() interface 
used to setup _pid_info for logging
 2015-05-27 14:28:48 +10:00
Andrew Tridgell 6000bb0c32 AC_PID: log desired rate for VFF as well as AFF 2015-05-27 14:28:48 +10:00
Andrew Tridgell b45ab52015 DataFlash: added desired rate to PID logging 2015-05-27 14:28:48 +10:00
Andrew Tridgell 4512e408f7 AntennaTracker: fixed build 2015-05-27 14:28:48 +10:00
Andrew Tridgell 254d4219d4 Rover: fixed build 2015-05-27 14:28:48 +10:00
Andrew Tridgell 86a3bca88c APM_Control: added FF parameters to roll and pitch controllers 
these are much easier to tune with the new PID_TUNING messages
 2015-05-27 14:28:47 +10:00
Robert Lefebvre 353879cd2b AC_AttitudeControl_Heli: Add Rate Accel FF to Yaw control 2015-05-27 14:28:47 +10:00
Robert Lefebvre 366f87c91c AC_HELI_PID: Add Acceleration FF method. 2015-05-27 14:28:47 +10:00
Robert Lefebvre 7ab628521e DataFlash: Add Acceleration Feedforward to PID_Info. 2015-05-27 14:28:47 +10:00
Robert Lefebvre 810b12a1ac AC_AttitudeControlHeli: Change Rate Yaw FF LPF from 5Hz to 10Hz. 2015-05-27 14:28:46 +10:00
Andrew Tridgell 22524daf5f Copter: added GCS_PID_MASK for mavlink rate tuning 2015-05-27 14:28:46 +10:00
Andrew Tridgell e79a21d8c2 AC_PID: fill in desired rate for heli PID 2015-05-27 14:28:46 +10:00
Andrew Tridgell 09476bf9d3 Plane: added GCS_PID_MASK for realtime pid tuning 2015-05-27 14:28:46 +10:00
Andrew Tridgell d148c38f68 DataFlash: added desired rate to PID_Info 2015-05-27 14:28:45 +10:00
Andrew Tridgell 0fe04a93ce GCS_MAVLink: rebuilt headers 2015-05-27 14:28:45 +10:00
Andrew Tridgell cc80fdf593 GCS_MAVLink: added PID_TUNING message 2015-05-27 14:28:45 +10:00
Andrew Tridgell c31da93726 Plane: log roll and pitch PIDs 2015-05-27 14:28:45 +10:00