Commit Graph

48 Commits

Author SHA1 Message Date
murata e007b21f9e AP_HAL_ChibiOS: Console output can be disabled 2022-05-17 09:53:06 +10:00
Andrew Tridgell 946a6ac4d0 HAL_ChibiOS: fixed RSSI from IOMCU analog pin 103
need to check new pin not old pin
2022-05-09 07:25:40 +10:00
Andrew Tridgell 93031e297d HAL_ChibiOS: fixed min/max inversion in MCU voltage logging 2022-03-08 11:33:21 +11:00
TunaLobster 11f98f7421 AP_HAL_ChibiOS: fix ADC scaling on IOMCU 2021-11-16 14:12:43 +11:00
Iampete1 f7cba024c1 AP_HAL_ChibiOS: AnalogSource: check for valid pin 2021-10-06 18:42:51 +11:00
Andrew Tridgell 0212e23cd3 HAL_ChibiOS: added support for STM32L496 MCUs
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
Andrew Tridgell e9427f1dae HAL_ChibiOS: removed remnants of CHIBIOS_ADC_MAVLINK_DEBUG 2021-08-25 07:11:31 +10:00
Andrew Tridgell 5bacd35eaa HAL_ChibiOS: review fixes 2021-08-25 07:11:31 +10:00
Andrew Tridgell 57e87b9820 HAL_ChibiOS: measure MCU temperature and ref voltage on H7
this uses ADC3 to measure the internal MCU temperature and the reference
voltage. This uses a currently unused BDMA channel
2021-08-25 07:11:31 +10:00
Andrew Tridgell 9990404e64 HAL_ChibiOS: fixed G4 analog input build
use right resolution in ADC peripheral for ADCv3
2021-04-14 13:11:58 +10:00
Andrew Tridgell ca948171fe HAL_ChibiOS: fixed ADC error on revXY STM32H7 boards
with the new ChibiOS revision we were configuring for newer revisions
of the H7, which meant that we changed the ADC config. This broke ADC
readings on revX and revY H7 MCUs.

This PR fixes it in two ways:

 1) change ChibiOS config to assume XY config chips

 2) use 16 bit ADC for H7, which means the chip rev doesn't matter,
    and also gives us 16x the resolution for ADC readinga, so we can
    read smaller voltage and current values
2021-04-05 11:01:03 +10:00
Iampete1 7c96522e44 AP_HAL_ChibiOS: add semaphore to AnalogIn::channel to make it thread safe 2021-03-30 10:44:43 +11:00
Andrew Tridgell bac9b27a3f HAL_ChibiOS: enable analogin on G4 2021-03-23 12:01:20 +11:00
Tom Pittenger d1e6b0befb AP_HAL_ChibiOS: Add ADC1 support to STM32F3
This is useful for AP_Periph battery monitoring
2021-02-04 16:30:38 -08:00
Andrew Tridgell 25bc128248 HAL_ChibiOS: fixed periph overpower ifdef
fixes overcurrent logging on several boards
2020-10-13 17:58:30 +11:00
Peter Barker b5d0480bed AP_HAL_ChibiOS: log accumulated power status flags; all flags ever set 2020-07-21 09:12:14 +10:00
Andrew Tridgell 863807c9fb HAL_ChibiOS: use more consistent naming for power VALID pins
this uses _VALID for an active high pin and _nVALID for an active low
pin. It uses _OC for active high overcurrent and _nOC for active low
overcurrent
2020-06-04 09:51:27 +10:00
Peter Barker 50523ed0fa AP_HAL_ChibiOS: remove pointless initialisations
These are never stack-allocated.

Only saves 16 bytes - but several lines
2020-05-10 18:03:36 +10:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Peter Barker 9fb715692e AP_HAL_ChibiOS: correct include of mavlink header for analog debug 2019-09-25 12:22:27 +10:00
Michael du Breuil 95bca05322 AP_HAL_ChibiOS: Only include MAVLink when using the MAVLink debugging 2019-09-19 10:48:25 +09:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Alexey Kozin e5988f7153 AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc 2019-07-02 06:42:11 +10:00
Andrew Tridgell d368d95aa7 HAL_ChibiOS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell 4deb2c38f6 HAL_ChibiOS: fixed brick2 valid status in POWR flags for fmuv5
and fixed sense of VBUS
2019-05-03 10:32:41 +10:00
Andrew Tridgell 6422068e6b HAL_ChibiOS: fixed analog input on H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell 599a1a3d67 HAL_ChibiOS: adapt analog driver for H7 2019-02-26 16:18:26 +11:00
Andrew Tridgell bbd25350eb HAL_ChibiOS: support ChibiOS kernel major 6
preparing for STM32H7 support
2019-02-26 16:18:26 +11:00
Andrew Tridgell af4340d1d1 HAL_ChibiOS: enable analog input on IOMCU 2018-10-30 13:00:48 +11:00
Andrew Tridgell 4416404137 HAL_ChibiOS: removed hal.util->new_semaphore()
replaced with HAL_Semaphore
2018-10-17 12:54:22 +11:00
Andrew Tridgell 340f1b43e6 HAL_ChibiOS: fixed RSSI voltage from IOMCU 2018-09-15 16:08:32 +10:00
Andrew Tridgell 490d6eea20 HAL_ChibiOS: fixed ADC bug
this caused bad analog readings when the number of channels being read
was more than the number of hw channels

thanks to @vierfuffzig for reporting!
2018-09-12 07:10:04 +10:00
Lucas De Marchi 668c941717 Global: use new version of ARRAY_SIZE 2018-08-04 15:31:55 +10:00
Michael du Breuil a832bdfd04 AP_HAL_ChibiOS: fix race condition on analog reading 2018-06-06 07:16:58 +10:00
Andrew Tridgell 2493cdbcb6 HAL_ChibiOS: switch to new bouncebuffer system
this removes the dma_flush and dma_invalidate methods and uses a
common bouncebuffer system for all CPU types. This enables microSD
support on STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell f25b95f287 HAL_ChibiOS: fixed array length in ADC debug code 2018-06-06 07:15:41 +10:00
Andrew Tridgell 8b1db792ee HAL_ChibiOS: ensure ADC memory is aligned for DMA access 2018-06-06 07:15:41 +10:00
Andrew Tridgell edb831653f HAL_ChibiOS: added dma_flush and dma_invalidate operations
these are needed to manage the data cache on the STM32F7
2018-06-06 07:15:41 +10:00
Andrew Tridgell e4ce2f532b HAL_ChibiOS: make smaller builds possible
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell b4aeffbaed HAL_ChibiOS: added power status flags reporting 2018-04-09 15:32:04 +10:00
Andrew Tridgell d191b37520 HAL_ChibiOS: cope with having no ADC inputs 2018-02-07 20:33:45 +11:00
Andrew Tridgell ba3cdf74b5 HAL_Chibios: optional ADC debugging
this debugging capability is very useful on board bringup. It outputs
the first 6 analog channels as an AP_ADC MAVLink message
2018-01-20 17:40:07 +11:00
Andrew Tridgell fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell f14a847b97 HAL_ChibiOS: rename classes to remove 'Chibi'
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell f5c8754d75 HAL_ChibiOS: use ARRAY_SIZE_SIMPLE
this allows for boards without a device type (eg. no SPI bus)
2018-01-15 11:46:02 +11:00
Andrew Tridgell b62773bbad HAL_ChibiOS: improved auto-config of ADC pins
ADC config now based on pin_scaling array
2018-01-15 11:46:02 +11:00
Andrew Tridgell 1cc4b92b76 HAL_ChibiOS: added additional FMUv3 analog pins 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00