Peter Barker
d4adb1923a
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
2024-07-17 17:42:01 +10:00
Peter Barker
956ac243e1
AP_HAL_ChibiOS: adjust hwdef files for define renames
2024-07-11 09:34:00 +10:00
Andrew Tridgell
ed58758ce6
hwdef: don't use DEFAULTGPIO in bootloaders
...
setting up a DEFAULTGPIO pulldown in bootloaders is a bad idea as it
overrides any hardware pullups that have been put in place as part of
a "hold in bootloader" mechanism. See discussion in #27360 for ELRS
note that this only impacts one board that I can see, the
BlitzF745AIO, due to the MCU vs DEFAULTGPIO interaction
2024-06-25 12:05:40 +10:00
Jacob Dahl
e5ea8f14f4
hwdef: ARKV6X: enable debug console
2024-05-02 15:16:33 -07:00
Jacob Dahl
9f5e837646
hwdef: ARKV6X: UART6 RC SBUS input
2024-05-02 15:16:33 -07:00
alexklimaj
e9f51a96cb
hwdef: ARKV6X add USART6 to serial list
2024-01-01 13:17:06 +11:00
alexklimaj
e1b991a84a
hwdef: ARKV6X ADIS16507 example
2023-10-05 08:21:50 +11:00
Peter Barker
b8978ad73a
hwdef: explicitly state no-bootloader-embedding on some boards
2023-08-17 08:37:31 +10:00
alexklimaj
738a4c638a
hwdef: arkv6x default to no IO MCU
2023-08-14 12:06:25 +10:00
Tom Pittenger
8bddd4168b
AP_HAL_ChibiOS: update hwdefs for eth
2023-08-06 09:20:08 +10:00
Tom Pittenger
291226eb5d
AP_HAL_ChibiOS: hwdef add support for Networking
2023-08-06 09:20:08 +10:00
Andrew Tridgell
5908508811
hwdef: default most boards to MAVLink2 for 2nd USB endpoint
...
only CubeOrange and CubeBlack left as SLCAN
2023-07-31 19:03:13 +10:00
Peter Barker
338a4d6b38
hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
...
these are now defaulted in chibios_hwdef.py
2023-07-19 17:25:18 +09:00
Andrew Tridgell
b019978e22
hwdef: use zero address for INA2XX to allow for different sensors
2023-05-10 18:15:52 +10:00
Andrew Tridgell
e4ce423c46
hwdef: DMA is off on I2C on F7 and H7 by default
...
no need to have it in hwdef.dat
2023-04-25 14:19:09 +10:00
alexklimaj
e5cd25ff98
hwdef: ARKV6X
2022-10-24 07:27:11 +11:00