Commit Graph

1156 Commits

Author SHA1 Message Date
deweibel@gmail.com 0df8daeaed Correct bug in CLI log "enable all" command.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2733 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 01:58:41 +00:00
jasonshort a7a4f999e3 AC 2.0.32 Beta
new Loiter PIDs
tuned down control on standard frame
shunk the mixing range for sonar from 3 meters to 2 meters
added framework for Guided mode - not tested!
removed pitch and roll deadzone
decoupled SIMPLE mode from LOITER PIDs
Synced Mavlink with APM
Logs report correct WP number now.
disabled Sonar spike filter.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2722 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 22:44:59 +00:00
tridge60@gmail.com 2605c4b4b2 AP_Compass: fixed calibration of 5883L compass
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.

This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass

pair-programmed-with: Randy Mackay

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
tridge60@gmail.com c78da666ec AP_Compass: report compass initialisation failure
don't just put out rubbish values

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
rmackay9@yahoo.com d310744bfc AP_Compass_test - added display to auto detected compass
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
jasonshort cf0a068f7c Fixed bug in alt hold caused by false Sonar readings.
Reverted to prior Rangefinderlib in case that was causing bad sonar readings.
reduced crosstrack gains and max angle to avoid overshoots and oscillations.
added additional D gain to Loiter hold to prevent overshoots
added D gain to WP_nav to avoid speed oscillations
upped navigation speed to 6m/s from 4.5m/s


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2710 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 00:19:10 +00:00
jasonshort 00222a2e20 temporally revert to prior version of Sonar class to narrow in on a bug.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
rmackay9@yahoo.com 8ce403cbe4 AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
rmackay9@yahoo.com da7a13128a AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
jasonshort 203bc4643d clean up to work better with the Mission planner and enable Camera control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2697 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 06:31:18 +00:00
jasonshort 09c02ed44f changed camera stabilization to 1 instead of ENABLED
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2696 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 19:57:40 +00:00
jasonshort f9c402f0f3 2.0.29
Fixed Mavlink issue
Added look at home option for SIMPLE mode. Off be default. Untested.
Upped performance of Yaw.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2695 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-27 17:01:53 +00:00
jasonshort 418a4b3903 removed redundant FP calcs for speed up.
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
jasonshort 4247586584 2.0.28
Fixed a mode switch issue. 

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2685 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 17:02:47 +00:00
analoguedevices@gmail.com 276b2c0966 commented out line 833 in main pde that was causing compile error, as per this report:
http://diydrones.com/forum/topics/2027-prolems-compiling-solved?xg_source=activity

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2679 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 14:15:26 +00:00
jasonshort bcea99f64c 2.0.27
Fixed GCS updates, 
Clear GCS Streamrates by default.
moved fast PWM functions to run all the time (for quads, experiment)
cleaned up Mavlink a bit.




git-svn-id: https://arducopter.googlecode.com/svn/trunk@2678 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:38:11 +00:00
jasonshort fe16f5d7a4 IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
DrZiplok cd864714ea Add a simple tool for dumping AP_Var data from an EEPROM dump.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
jasonshort 8f036514f4 minor formatting, enabled sonar spike filter.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2670 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 05:59:06 +00:00
jasonshort 254a93343d extra \ removed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2669 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 00:42:57 +00:00
jasonshort 9d6d0de021 Forgot to add setup for V Octo support from Dani Saez
Added start of contributors list into code comments.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2668 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 17:09:59 +00:00
jasonshort bc13dac119 formatting
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2658 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:41:48 +00:00
jasonshort d2ce6ebf8d 2.0.26
minor updates, 
Arming motors now for only Stabilize, Simple, and Acro Modes.
V Octo Support


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2657 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-24 04:37:54 +00:00
james.goppert 56483bc322 Added debug/ upload targets to Arduino.mk
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
james.goppert a3950ca63e Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
DrZiplok 582cc1e229 Enable map file generation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
deweibel@gmail.com 8d7e7ff58e revert gps lib to 2602
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
deweibel@gmail.com 26d1ec1f56 remove static declaration from idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
deweibel@gmail.com 5b9e7eff9d clean up idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
deweibel@gmail.com b53b749fc7 Fix initialization of idleTimeout
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
dhcorley@msn.com 6be97515ac re-sync rawgps cli test with APM2 (r2501)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2601 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 17:11:54 +00:00
jasonshort 7521ceed61 Vector3<T>() { x = y = x = 0; }
changed to :
	Vector3<T>() { x = y = z = 0; }

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
dhcorley@msn.com 098ac1599b Add planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2599 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:17:08 +00:00
dhcorley@msn.com 4d67241537 syncing planner.pde with APM2. For planner menu item on main menu . (issue tracker 194)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2598 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 15:12:55 +00:00
jasonshort 1345a2ac6d 2.0.25
changed Yaw to be offset from current angle to avoid the kick back.
Made minimum motor speed user settable, upped to 13% (130)
tweaked alt hold D to be higher and P to be slightly lower.


git-svn-id: https://arducopter.googlecode.com/svn/trunk@2579 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-19 05:31:33 +00:00
jasonshort 9c4517cfd2 update to Baro lib to remove temp filtering.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
jasonshort b69012803d log merge with APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2568 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:12:10 +00:00
jasonshort cb168c399d AC2.0.24b
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2567 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 17:03:26 +00:00
jasonshort c5f06b99fe silly formatting
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:43:43 +00:00
jasonshort 47bc8a7500 removed some initial settings
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
jasonshort ec5035d1ec added optimization note
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2564 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:34:23 +00:00
jasonshort 76d072591b made timeout public, settable
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
jasonshort e2d5f7bf82 removed duplicate filter from ADC based input
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2562 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:30:37 +00:00
tridge60@gmail.com ea728060f3 disable the re-ordered initialisation warnings
these are not useful for us, and will always happen with our parameter
code

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2561 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:10 +00:00
tridge60@gmail.com cf68e31729 fixed warnings in PID.h
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2560 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:00 +00:00
tridge60@gmail.com cb492ac00e fixed warnings in AP_DCM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2559 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:51 +00:00
tridge60@gmail.com 9cb9a54d64 fixed a warning in AP_Var.h
index is in system headers as a string function

git-svn-id: https://arducopter.googlecode.com/svn/trunk@2558 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:40 +00:00
jasonshort edaf2b9641 Based on Doug's recommendation - increased Accel weighting to .66 – 1.33 Gs
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2557 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 23:37:43 +00:00
jasonshort b35d0677d0 the temp change in the state machine didn't really help the altitude issue after all. Need more testing as the temp sway is the major factor in the lack of air pressure accuracy.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2556 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 15:46:38 +00:00
jasonshort 40c6b592df git-svn-id: https://arducopter.googlecode.com/svn/trunk@2555 f9c3cf11-9bcb-44bc-f272-b75c42450872 2011-06-14 06:05:18 +00:00