Commit Graph

145 Commits

Author SHA1 Message Date
Henry Wurzburg fa81f7813c AP_Airspeed: correct metadata for params for non-Plane vehicles 2022-04-05 09:58:10 +10:00
Tom Pittenger 42d1ce635b AP_Airspeed: improve description of ARSPD_TUBE_ORDR 2022-03-08 14:34:58 -08:00
Iampete1 72a65cadb8 AP_Airspeed: rename get_health_failure_probability to get_health_probability 2022-03-02 16:14:50 +11:00
Peter Barker 2d0d2a123d AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter 2022-01-19 18:21:32 +11:00
Josh Henderson 1831a1a009 AP_Airspeed: NFC add note about TYPE 0 index 2022-01-19 18:21:32 +11:00
Josh Henderson bf65b2eba8 AP_Airspeed: move default type for SITL to be for only Plane 2022-01-19 18:21:32 +11:00
Joshua Henderson 3cfbad0f4d AP_Airspeed: add AP_AIRSPEED_ENABLED 2022-01-19 18:21:32 +11:00
Hwurzburg 7c6816ec70 AP_Airspeed: change UAVCAN in metadata to DroneCAN 2021-12-15 09:53:21 +11:00
Peter Barker f9580c0dfe AP_Airspeed: add date for parameter conversion code 2021-11-23 12:27:14 +00:00
Josh Henderson ea4c3d68d6 AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
Iampete1 89c0a8ea04 AP_Airspeed: use floats for get/set output scaled 2021-10-20 18:29:58 +11:00
Hwurzburg b327f80946 AP_Airspeed: do not cal if backend does not exist 2021-10-07 13:36:44 +11:00
Peter Barker 22e9ad4818 AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Andrew Tridgell f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Andrew Tridgell cbf549b1eb AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0 2021-07-21 18:22:11 +10:00
Andrew Tridgell 5f87335325 AP_Airspeed: review updates
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-07-12 17:14:59 +10:00
Andrew Tridgell 0bdd8231cf AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell ca1508b02e AP_Airspeed: added DEVID parameters for airspeed
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Peter Barker 6da68e39f8 AP_Airspeed: add rc channel option to disable all airspeed sensors 2021-06-23 15:13:13 +10:00
Peter Barker 00002b78a4 AP_Airspeed: remove HIL support 2021-06-15 09:47:31 +10:00
QioTek 0190a42e47 AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
Andrew Tridgell 857d905d9f AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
Peter Barker de2802e322 AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Peter Barker 8647dda8a9 AP_Airspeed: add and use instance number to ARSP message 2020-11-24 12:19:45 +11:00
Iampete1 0e41b821e8 AP_Airspeed: defualt to type none on sub 2020-10-27 11:24:49 +11:00
Iampete1 2aff8787c1 AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
Iampete1 662d4640ef AP_Airspeed: add dedicated MAX_WIND param 2020-10-27 11:21:04 +11:00
Andrew Tridgell 505953bdb2 AP_Airspeed: added get_num_sensors() 2020-08-27 20:20:51 +10:00
Andrew Tridgell a20d3fed94 AP_Airspeed: allow hwdef override of airspeed default type 2020-08-25 09:59:15 +10:00
Siddharth Purohit d65b43795a AP_Airspeed: move to using CANManager library 2020-08-19 17:31:09 +10:00
Josh Welsh eb4b5fb720 AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O 2020-08-12 08:02:49 +10:00
Henry Wurzburg 21940cea09 AP_Airspeed: fix airspeed messages for consistency 2020-07-21 09:41:05 +10:00
Andrew Tridgell 40f1b5f9ae AP_Airspeed: use GCS_SEND_TEXT() 2020-04-29 07:36:55 +10:00
Peter Barker 6046aa3625 AP_Airspeed: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Andrew Tridgell b5e091bc84 AP_Airspeed: hide unused parameters for AP_Periph 2020-02-18 11:15:05 +11:00
Andrew Tridgell f51378f2e8 AP_Airspeed: enable for use in AP_Periph 2019-10-21 19:12:01 +11:00
Andrew Tridgell c173f8e24d AP_Airspeed: support both 5inH2O and 10inH2O versions of DLVR sensor
useful for faster aircraft
2019-07-19 21:39:30 -07:00
Andrew Tridgell 1ffc2cbe41 AP_Airspeed: allow setting of default airspeed pin 2019-07-13 15:23:45 +10:00
Peter Barker 5cfba85095 AP_AirSpeed: take EAS2TAS directory from baro; use for all backends
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
2019-06-06 12:44:36 +10:00
Andrew Tridgell bbe4c92b58 AP_Airspeed: skip cal on watchdog reset 2019-04-22 16:53:35 +10:00
Peter Barker f0379ff7f0 AP_Airspeed: move logging of ARSP into Airspeed library 2019-04-09 09:29:35 +10:00
Peter Barker 59ef486da0 AP_Airspeed: add AP::airspeed() to get airspeed singleton 2019-04-09 09:29:35 +10:00
Peter Barker 4ab13b37ac AP_Airspeed: logger uses the singleton for logging airspeed now 2019-04-09 09:29:35 +10:00
Tom Pittenger e67b6e15fa AP_Airspeed: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Tom Pittenger 0c32453505 AP_Airspeed: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Tom Pittenger 95c903c7cf AP_Airspeed: disable airspeed (_TYPE=0) as rover default 2019-02-07 11:17:21 +09:00
Tom Pittenger 1a04a540f5 AP_Airspeed: convert the defines into static consts
- also perform logging at end of update
- convert Options Mask into an enum
2019-02-03 08:25:46 -08:00
ChrisBird d77906cb06 AP_Airspeed: This adds the ability to turn off and on the airspeed sensor if faulty. 2019-02-03 08:25:46 -08:00
Nathan E 0401078694 Update AP_Airspeed.cpp 2019-01-23 09:24:18 -07:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00