Randy Mackay
cb1f7ba4bb
Copter: remove setting position control's altitude max
...
AC_Avoid now takes responsibility for enforcing the alt limit and accesses inertial nav's limit directly
2017-01-18 09:35:47 +09:00
Randy Mackay
b15d341850
Copter: add avoidance adjusted climb rate
2017-01-18 09:35:47 +09:00
Randy Mackay
cc217550c0
Copter: rename arming_checks to AP_Arming
2017-01-17 11:45:08 +09:00
Peter Barker
bd6ffc025e
Copter: start conversion to AP_Arming_Copter
2017-01-17 11:45:08 +09:00
Andrew Tridgell
1297a7dedb
Copter: convert the rest of motors class for tricopter
2017-01-12 17:39:37 +11:00
Andrew Tridgell
0f6d0c5ba9
Copter: combined tri, single, coax and multicopter into a single build
...
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Francisco Ferreira
11b635df12
Copter: correct limit status to fence status
2017-01-12 02:00:51 +00:00
Peter Barker
a233024e05
Copter: fix compilation when fence andd proximity are disabled
...
This adds AC_AVOID_ENABLED; avoidance must be disabled if either
of fence or proximity are disabled.
Parameter definitions have been reordered to avoid compiler warnings;
this make sthe numbering non-linear
2017-01-03 10:44:03 +09:00
Randy Mackay
01bcf5e528
Copter: add arming checks for motor setup
2016-12-31 10:55:23 +09:00
Randy Mackay
217757fdc8
Copter: default FRAME_CLASS
2016-12-31 10:55:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Andrew Tridgell
c3b9dbf5c8
ArduCopter: Add EKF3 and remove EKF1
2016-12-19 08:07:09 +11:00
Pierre Kancir
3fc17a5ed5
Copter: avoid must be initialized after fence as it use it
2016-12-05 10:59:45 -08:00
Peter Barker
556eb88fe5
Copter: fix compile when precland is not selected
...
Fixes #5327
2016-12-05 20:03:00 +09:00
Peter Barker
289aba4350
Copter: support for NAV_CMD_PLACE
2016-12-02 12:52:53 +11:00
Randy Mackay
74c9c4aa9d
Copter: add beacon data flash logging
...
Added to Copter vehicle because currently only used by Copter
2016-11-30 17:56:59 +09:00
Randy Mackay
21c7ea1df7
Copter: integrate AP_Beacon
2016-11-30 17:56:55 +09:00
Andrew Tridgell
bcea3ac8d4
Copter: handle rangefinder glitches in alt tracking
...
this handles glitches from the rangefinder when tracking the
ground. It requires 3 readings in a row to settle on a new target
altitude
thanks to discussions with Leonard and Randy
2016-11-28 17:36:01 +11:00
Randy Mackay
7485de3498
Copter: add send_proximity to send distances to GCS
2016-11-27 15:05:46 +09:00
Randy Mackay
218c8b2d16
Copter: proximity pre-arm check displays closet object
2016-11-27 15:05:44 +09:00
Peter Barker
e72f5a6240
ArduCopter: enable/disable precision loiter on a switch
...
A switch MUST be assigned for precision loiter to be enabled
2016-11-18 09:41:56 +09:00
Peter Barker
9e4628af58
Copter: precision loiter
2016-11-18 09:41:56 +09:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
Peter Barker
920868145c
Copter: support for AP_Gripper
2016-11-05 10:20:33 +09:00
Peter Barker
1bb6350a67
Copter: periodically call stats update
2016-10-29 14:53:25 +09:00
Peter Barker
df07cb525a
Copter: use AP_Stats to store statistics about vehicle
2016-10-29 14:53:25 +09:00
floaledm
34718b130a
Copter: update sensor status error flags independently of sending a sys_status message
...
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
2016-10-28 10:03:38 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Leonard Hall
fec24437f2
Copter: load accel throttle I term from attitude controller input
...
Previously we loaded up the I term from the pilot's input but a more reliable method is to get what was passed into the attitude controller. In particular the addition of the acro-thr-mid parameter means the pilot's input must be interpreted differently for different flight modes.
2016-10-15 11:27:53 +09:00
Randy Mackay
a124001b8b
Copter: get_pilot_desired_throttle gets thr_mid argument default
2016-10-15 11:27:53 +09:00
Leonard Hall
5c47f3f9e5
Copter: add acro throttle and yaw expo and smoother manual pilot throttle
2016-10-15 11:27:53 +09:00
Randy Mackay
0aab175051
Copter: move proximity to g2
2016-10-14 14:02:29 +09:00
Jonathan Challinger
f2ef8eec8c
Copter: use velocity output from AC_PrecLand
2016-10-14 10:46:08 +09:00
Randy Mackay
a07ecfe2b3
Copter: log proximity sensor at 10hz
...
This is current in the Copter vehicle code but we can move to the dataflash library when other vehicles start using this type of sensor. Until then adding it to common will just increase the dependencies unnecessarily for other vehicles.
2016-10-13 20:21:07 +09:00
Randy Mackay
fcc2a1b378
Copter: integrate AP_Proximity into main vehicle
2016-10-13 20:21:07 +09:00
Randy Mackay
26c3295042
Copter: ignore first ekf core switch
...
The ekf core is initialised to -1 but after initialisation changes to zero. Ignore this first change.
2016-10-13 15:20:16 +09:00
Randy Mackay
d74ae535d1
Copter: log EKF lane switch
2016-10-10 16:40:08 +09:00
Randy Mackay
35864c6226
Copter: move check_ekf_reset to ekf_check.cpp
...
No functional change
2016-10-10 16:40:08 +09:00
murata
7148cc6239
Copter: Return value is changed to Enum Value.
2016-10-05 08:25:15 -03:00
Andrew Tridgell
f18e0dadc9
Copter: added optional AdvancedFailsafe for copter and heli
2016-08-25 14:14:18 +10:00
floaledm
893614897e
Copter: moved MAV_TYPE to Copter.h
2016-08-25 10:16:20 +10:00
Andrew Tridgell
a14ff8ac77
Copter: fixes for Frsky_Telem API changes
2016-08-25 10:16:20 +10:00
floaledm
157db51b9d
Copter: make control_sensor vars available outside of send_extended_status1
2016-08-25 10:16:18 +10:00
floaledm
f73fa1fc80
Copter: removed frsky_telemetry_send scheduled task
2016-08-25 10:16:17 +10:00
Peter Barker
f67d247a46
Copter: factor pre-arm checks, continue testing after a failure
...
The functional change here is that we continue to run later checks
when a check fails.
The user-visible effect of that is that your GCS will tell you about
all pre-arm failures, not just the first.
This makes things work a little more like Plane, in preparation for
using AP_Arming.
2016-08-16 11:37:18 -03:00
Andrew Tridgell
3041a75798
Copter: limit attitude on landing using WP_NAVALT_MIN
2016-08-16 11:26:56 +10:00
Randy Mackay
0ed5665193
Copter: change parameter order of guided_set_angle
...
I thought it might be slightly better to put the optional parameters at the end
No functional change
2016-08-10 10:03:54 +09:00
Allan Matthew
6dd4e1a2aa
Copter: accept yaw rate commands in Guided atttude controller
2016-08-10 10:03:37 +09:00
Randy Mackay
9842840346
Copter: GND_EFFECT_COMP parameter to enable ground effect compensation
2016-08-09 13:31:36 +09:00