Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
35,104 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

261 Commits

Author SHA1 Message Date
Randy Mackay 71708ee4ea Plane: quadplane uses set_defaults_from_table 2018-12-06 12:23:41 +09:00
IamPete1 c6e70c0454 Plane: add roll limit for tailsitters 
Quadplane: add tailsitter pitch params
 2018-12-01 09:40:07 +11:00
Andrew Tridgell b6519c88a5 Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors 
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
 2018-11-30 18:17:42 +11:00
Leonard Hall 0943ace7a9 Plane: Zero Yaw correction during transition 
and relax attitude controller when not using lift motors.
 2018-11-30 18:16:29 +11:00
Andrew Tridgell c081ce9adb Plane: don't relax attitude controllers for tailsitters 
this fixes an issue with testing control movement when disarmed
 2018-11-30 13:01:53 +11:00
Andrew Tridgell da69bf3391 Plane: added an abstraction for reverse thrust 
use have_reverse_thrust() and get_throttle_input()
 2018-11-16 08:33:35 +11:00
Andrew Tridgell c59b2c156a Plane: fixes for Q_TRIM_PITCH 
improved documentation and variable names
 2018-11-12 17:05:04 +11:00
IamPete1 5a7bd61e8c Quadplane: add trim params 2018-11-12 17:05:04 +11:00
Michael du Breuil 8e906e0ba0 Plane: Add support for a loiter to alt approach to VTOL landing 2018-11-10 18:58:54 +11:00
Peter Barker 4e3e39a3e8 Plane: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil 02d37d43d2 Plane: Disallow climbs during TRANSITION_AIRSPEED_WAIT 2018-10-02 09:35:47 +10:00
Michael du Breuil b2ef6b901e Plane: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Michael du Breuil b6efc8a20b Plane: reduce some copy pasted code 2018-09-20 13:47:21 -07:00
Leonard Hall 13c27e0eb8 Plane: Missing Loiter Init on accel 2018-09-19 17:29:55 +09:00
Andrew Tridgell 5136b90d27 Plane: do attitude relax after 100ms 2018-09-15 11:00:29 +10:00
Leonard Hall 7372a7b5f9 QuadPlane: Remove repeat I term reset 2018-09-15 11:00:29 +10:00
Andrew Tridgell ef154cf3fa Plane: fixed relaxing of attitude controller on transition 
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
 2018-09-15 11:00:29 +10:00
Michael du Breuil f9e56f9d12 Plane: Respect frame type on VTOL_TAKEOFF commands 
allow missioncommands to fail to start
 2018-09-11 06:42:00 +10:00
Michael du Breuil 925d76bb8c Plane: Small cleanup to quadplane const (and clarity) 2018-09-04 15:11:41 +10:00
Leonard Hall e11c7c6069 QuadPlane: remove true from init of loiter 2018-09-04 13:37:28 +09:00
Michael du Breuil 3d923d0572 Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT 2018-08-07 09:49:01 +10:00
Andrew Tridgell 16c7ab81dc Plane: pass rc_speed to motor backend constructors 
this sets the right speed as early as possible
 2018-07-28 15:25:57 +10:00
IamPete1 20c67019b0 Plane: added Q_TAILSIT_THSCMX 
this provides more flexibility in tailsitter throttle scaling
 2018-07-19 09:48:25 +10:00
Andrew Tridgell d8a7618e15 Plane: update use of AC_Loiter controller for quadplane 
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.

The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.

This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
 2018-06-11 08:40:58 +09:00
Andrew Tridgell d07f8aa42b Plane: fixed a bug in transition to QSTABILIZE for tailsitters 
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
 2018-04-25 18:01:12 +10:00
Randy Mackay 840a6e4147 Plane: quadplane uses AC_Loiter 
includes param conversion
 2018-04-04 10:45:10 +09:00
Peter Barker f6a185a3c3 Plane: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Randy Mackay 548a7f8fcf Plane: add minor comment to quadplane 2018-03-16 13:50:57 +09:00
Leonard Hall ee745d2cd2 Plane: quad plane uses rate-control control during transitions 2018-03-16 13:50:57 +09:00
Leonard Hall a16d4ddad7 Plane: quadplane uses poscontrol instead of loiter 2018-03-16 13:50:57 +09:00
Randy Mackay c5d838125b Plane: quadplane logs PSC message 2018-03-16 13:50:57 +09:00
Randy Mackay 09cad7c59d Plane: quadplane integrates attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 03c162432e Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration 2018-03-16 13:50:57 +09:00
Randy Mackay a0a9a68fbc Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC 
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
 2018-03-16 13:50:57 +09:00
Leonard Hall aa47b19dea Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy 2018-03-16 13:50:57 +09:00
Randy Mackay ddcd08d6b6 Plane: PSC_ACCZ param name shortened 2018-01-31 08:48:21 +09:00
Michael du Breuil aec7521da4 Plane: Fix truncation of a time interval 
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
 2018-01-25 14:30:49 +11:00
Randy Mackay d579e086cf Plane: quadplane param index comment for moved PIDs 2018-01-24 21:14:53 +09:00
Andrew Tridgell 20b05e4228 Plane: added conversion code for PID layout change 
this copes with the move of multicopter PIDs inside the position
controller
 2018-01-24 18:23:59 +11:00
Randy Mackay 7b1157e2d8 Plane: remove setting accel_z PID controller's dt 
This is handled within pos-controller's set_dt function
 2018-01-23 12:00:43 +09:00
Randy Mackay f41f4dc6e5 Plane: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 017e71a748 Plane: quadplane velocity pi moves to position control library 2018-01-23 12:00:43 +09:00
luweikxy 25224cd261 Plane: remove dead code from do_vtol_land 2017-12-14 20:52:18 +09:00
Andrew Tridgell f7a735b990 Plane: fixed transitions for tailsitters after auto-takeoff 
need to use angle wait
 2017-11-19 16:06:02 +11:00
Andrew Tridgell 957c1f6d23 Plane: extend QLOITER transition pitch limit 
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
 2017-11-05 21:35:32 +11:00
Andrew Tridgell 9c8cd6c1cc Plane: added Q_TRANS_DECEL 
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
 2017-11-05 20:44:42 +11:00
Andrew Tridgell e27c54a312 Plane: smooth out fwd tailsitter transition 
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
 2017-11-05 17:25:00 +11:00
Michael du Breuil d52f5155f0 Plane: Rename rc failsafe state members 2017-11-02 16:46:08 -07:00
nick2204 7d91755bd1 Plane: update Q_OPTIONS docs 
Made q_options description a little clearer
 2017-11-01 09:38:42 +11:00
Andrew Tridgell 1085069851 Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL 2017-10-30 16:52:19 +11:00