Peter Barker
5c7e22debb
ArduPlane: correct return error return codes for DO_FOLLOW
...
in the case it wasn't compiled in the return code would be correct.
in the case that the parameter was invalid we would return FAILED, which is wrong, it should be DENIED
2023-08-01 10:43:34 +10:00
Peter Barker
354e3fa5bf
Plane: rely on conversion from long to int for DO_FOLLOW
...
we have code which tries to handle commands coming in as command long as command int.
Change to rely on that code working, rather than handling both command-long and command-int variants
2023-08-01 10:43:34 +10:00
Henry Wurzburg
b4c79c9105
Plane:add FlightOptions helper
2023-04-26 17:35:25 +10:00
Peter Barker
068443718e
GCS_MAVLink: deprecate use of MISSION_SET_CURRENT message
...
The mavlink command MAV_CMD_DO_SET_MISSION_CURRENT has been in place since January 2019 and is superior to this.
2023-04-18 10:24:26 +10:00
Tom Pittenger
3ac55f97b1
Plane generalize Aux Switch VTOL abort for any plane abort landings
2023-03-15 13:31:43 -07:00
Peter Barker
c18276e19b
ArduPlane: add support for mavlink in-progress message
2023-02-21 17:07:41 +11:00
Andrew Tridgell
2989e2deba
Plane: added support for NAV_PACKAGE_PLACE mission item
...
this works in conjunction with a lua script to allow for a wide
variety of package place options
2023-02-09 07:02:12 +11:00
Peter Barker
f0e17957f4
ArduPlane: avoid using struct Location
...
clang reports this could be a problem when compiling under some EABIs. Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
2023-02-04 22:51:54 +11:00
Iampete1
da503a5e44
Plane: GCS_Mavlink: use base class DO_SET_HOME
2022-12-14 19:25:44 +11:00
Peter Barker
447392c7f4
Plane: factor out handle_manual_control_axes
2022-11-23 19:33:46 +11:00
Peter Barker
de4dda2d17
ArduPlane: change namespace of MultiCopter and FixedWing params
...
this stops the libraries knowing anything about AP_Vehicle
2022-11-09 19:04:37 +11:00
Andrew Tridgell
0c14a28aa3
Plane: check for EFI enable in messages
2022-10-25 11:44:45 +11:00
Henry Wurzburg
58f8c34211
ArduPlane: update SRX descriptions
2022-10-19 23:26:45 +11:00
Andrew Tridgell
1421fccdac
Plane: send HYGROMETER_SENSOR data if available
2022-10-19 13:17:30 +11:00
Peter Barker
93c1b53a67
ArduPlane: stop sending BATTERY2 by default
2022-10-18 11:12:49 +11:00
Tom Pittenger
46bc30a40c
Plane: add guided radius to mavlink DO_REPOSITION
2022-10-11 09:35:28 -07:00
Peter Barker
3a61c97221
ArduPlane: do not send MSG_RPM if RPM not enabled
2022-09-28 20:10:21 +10:00
Peter Barker
81c138e0a4
Plane: remove logging of CMDI
...
This is a duplicate of the data logged into "MAVC"
2022-09-14 17:44:50 +10:00
Michael du Breuil
dba90ec227
Plane: Don't send HWSTATUS by default
2022-09-13 14:27:06 +10:00
Randy Mackay
c255b3b5b6
Plane: replace send-mount-status with send-gimbal-device-attitude-status
2022-08-15 20:29:25 -04:00
Michael du Breuil
f183b21fc5
Plane: Support vtol landing options on NAV_VTOL_LAND
...
This allows the same mission to contain both circular and straight
landing items, and doesn't require on the fly tweaking
2022-08-15 17:05:00 -07:00
Iampete1
ee778dbd3a
Plane: Quadplane: add option_is_set helper for Q_OPTIONS
2022-08-09 13:21:00 +10:00
Peter Barker
b0bee613d4
ArduPlane: add and use AP_ICENGINE_ENABLE
2022-07-22 08:48:16 +10:00
Iampete1
50024a6ec2
Plane: add AIS to ADSB stream rate
2022-07-12 09:39:54 +10:00
Randy Mackay
402ea2b72d
Plane: remove unused MSG_GIMBAL_REPORT
2022-06-07 09:27:47 +10:00
Peter Barker
6152b8618f
ArduPlane: remove handling of MAVLINK_MSG_ID_SET_HOME_POSITION
...
We decided to remove this after 4.2 was out in favour of
MAV_CMD_DO_SET_HOME which has been available since 2015.
The gcs-maintainers list was notified in Feburary.
2022-05-10 09:46:22 +10:00
Peter Barker
fd4a00a654
ArduPlane: stop libraries including AP_Logger.h in .h files
...
AP_Logger.h is a nexus of includes; while this is being improved over
time, there's no reason for the library headers to include AP_Logger.h
as the logger itself is access by singleton and the structures are in
LogStructure.h
This necessitated moving The PID_Info structure out of AP_Logger's
namespace. This cleans up a pretty nasty bit - that structure is
definitely not simply used for logging, but also used to pass pid
information around to controllers!
There are a lot of patches in here because AP_Logger.h, acting as a
nexus, was providing transitive header file inclusion in many (some
unlikely!) places.
2022-04-08 19:18:38 +10:00
Peter Barker
2784f8fa7f
Plane: remove persistent guided_WP_loc state
...
So instead of updating plane.guided_WP_loc and then calling
set_guided_WP(void) to copy that state into plane.next_WP_loc we pass
the new location in the call to set_guided_WP(const Location &loc).
avoidance was the only place which was not entirely over-writing
plane.guided_WP_loc. However, plane.next_WP_loc was updated to be the
current location when we entered guided mode. If we update the
horizontal/vertical avoidance now it is relative to the current
location, not the guided wp location, which could be quite important.
2022-03-22 10:14:40 +11:00
Peter Barker
1f5165349e
Plane: correct compilation when airspeed disabled
2022-03-20 21:47:05 +11:00
Andrew Tridgell
cc9b9813cb
Plane: review fixes
...
thanks Pete!
2022-03-10 07:34:20 +11:00
Andrew Tridgell
33bc067edf
Plane: fix NAV_CONTROLLER_OUTPUT in Q modes
...
Q modes don't always use wp_nav, but do use pos_control
AUTO and QRTL setup the plane navigation as well, so can use the L1
data
2022-03-10 07:34:20 +11:00
Andrew Tridgell
3fe9a55269
Plane: added APIs for lua ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
c54fb0f51b
Plane: link in AP_Follow
...
ready for ship landing
2022-03-10 07:34:20 +11:00
Peter Barker
452a5df0cc
ArduPlane: add RebootRequred to stream rate parameters
2022-03-01 11:01:12 +11:00
Peter Barker
458d43fc1e
ArduPlane: send deprecated message warning for MAVLINK_MSG_ID_SET_HOME_POSITION
2022-02-10 12:13:43 +11:00
Peter Barker
d914e4e63b
Plane: convert next WP alt to global frame in POSITION_TARGET_GLOBAL_INT
2022-02-09 16:09:41 +11:00
Peter Barker
10be59da17
ArduPlane: create and use location_from_command_t
2022-02-09 09:15:11 +11:00
Peter Barker
266d384ca7
ArduPlane: rename AP_AHRS::get_position to get_location
2022-01-25 10:47:22 +11:00
Josh Henderson
9a3fed0263
Plane: move high_latency_air_temperature up
2022-01-19 18:21:32 +11:00
Andrew Tridgell
3273ead11b
Plane: use EKF climb rate estimate in VFR_HUD.climb
...
EKF estimate is both more accurate and less noisy
2022-01-18 13:26:31 +11:00
Peter Barker
7c3de472b2
Plane: support send_extended_sys_state
2021-11-09 10:22:24 +11:00
Peter Barker
6a12d3f5d9
Plane: use enum class for StickMixing
2021-11-03 18:06:00 +11:00
Tom Pittenger
c450145fd5
Plane: move ADSB mavlink handling from vehicles to common library
2021-10-14 19:55:27 -07:00
Josh Henderson
8af299f978
Plane: HIGH_Latency2 check get_temperature return and return INT8_MIN
2021-10-13 19:40:45 +11:00
Peter Barker
3e031e78e5
Plane: add comment about us sending airspeed error in wrong units
2021-10-05 11:20:55 +11:00
Iampete1
a0260b05b3
Plane: handle_guided_request per mode
2021-09-28 09:31:13 +10:00
Iampete1
1148bb1234
Plane: Quadplane: add loiter to alt then QLAND mode
2021-09-28 09:31:13 +10:00
Iampete1
cbfa4e5746
Plane: remove trim_radio mavlink option
2021-09-28 09:16:24 +10:00
Bob Long
728d1e76fe
Plane: clean up cm-to-m conversion in nav_control_output
2021-09-21 09:40:00 +10:00
Bob Long
f2d32fc800
Plane: quadplane: fix wp_dist reporting for VTOL landings
...
After hitting the approach stage of a VTOL landing in auto, nav_controller_output sends zero as the distance to waypoint.
2021-09-21 09:40:00 +10:00