Commit Graph

134 Commits

Author SHA1 Message Date
Andrew Tridgell db0d3c5e89 AP_Param: fixed race in param count handling 2020-04-29 07:36:55 +10:00
Andrew Tridgell 766fb32292 AP_Param: added set_enable() API
used to set value of an enable parameter, clearing count cache
2020-04-29 07:36:55 +10:00
Peter Barker b490f20f3d AP_Param: panic if defaults file load fails 2020-04-18 21:51:16 +10:00
Siddharth Purohit 1d2985e967 AP_Param: add method to find key of top level group variable by pointer 2020-02-19 13:59:53 +09:00
Peter Hall 5164eacc4a AP_Param: add get and set functions 2020-02-18 10:18:12 +11:00
Peter Hall 623c1aa3cd AP_Param: add singleton 2020-02-18 10:18:12 +11:00
Peter Hall 1ee14ffa75 AP_Param: use thread safe object buffer 2020-02-12 07:05:05 +11:00
Andrew Tridgell 7ef86c9bb1 AP_Param: added convert_parameter_width()
this allows for easy conversion of the width of a parameter without
changing indexes
2020-01-14 14:23:11 +11:00
Mark Whitehorn f8d4cba667 AP_Param: rename sensor_config_error to config_error 2019-11-08 10:14:34 +11:00
Andrew Tridgell 31b0663115 AP_Param: use strtof instead of atof
we don't need double precision
2019-10-28 15:53:16 +11:00
Andrew Tridgell 6573857a90 AP_Param: support @READONLY marker in param files
allows for read-only parameters embedded in firmware
2019-09-12 10:50:30 +10:00
Peter Barker ca5ee2bfbc AP_Param: correct fetching of flags for parameters
This was sending through the flags for the group the parameter was in,
rather than the parameter itself.
2019-08-30 06:57:30 +10:00
Peter Barker b493805fb4 AP_Param: methods to provide amount of parameter space used
AP_Param: provide method for storage size
2019-08-28 11:51:09 +10:00
Andrew Tridgell f897eae89d AP_Param: enable reduced size support for AP_Periph 2019-08-27 10:29:56 +10:00
Peter Barker 2049e86dda AP_Param: optionally return parameter flags in AP_Param::find(...) 2019-08-22 09:23:56 +10:00
Andrew Tridgell 2572885159 AP_Param: flush() after converting parameters
this prevents a race in sub where a set_default_by_name() directly
follows a parameter conversion for ARMING_CHECK. Without the flush the
default is written to storage by the IO queue draining after the set()
2019-07-30 10:42:16 +10:00
Michael du Breuil f06251a07f AP_Param: Delay param dumps to avoid running out of buffer space 2019-07-30 10:42:16 +10:00
murata 88c681586f AP_Param: Match output type and variable type 2019-07-16 10:11:13 +10:00
Michael du Breuil 40753ab14e AP_Param: Remove non functional AP_Param ignore flags 2019-06-11 10:28:45 +10:00
Peter Barker 0d1b7b90b9 AP_Param: avoid allocating 0 bytes if no defaults
This stopped CUAVv5 from booting.

Also add some protection against having different parsers for the same
file format used for counting parameters and actually using them.
2019-05-14 08:02:54 +10:00
Randy Mackay 94ee157575 AP_Param: set_defaults_from_table reports failure with sensor_config_error
replace panic and send_text with call to AP_BoardConfig::sensor_config_error to make it easier for users or developers to find the issue
2018-12-06 12:23:41 +09:00
Randy Mackay 98cd300885 AP_Param: add set_defaults_from_table 2018-12-06 12:23:41 +09:00
Michael du Breuil effdc436f2 AP_Param: Fix a mixture of new/free 2018-11-26 22:32:56 +00:00
Andrew Tridgell 4d662a913a AP_Param: use background parameter save
this moves both the storage scan and the save code out of the main
thread and into the IO thread. It means that if we have more than 30
parameters saves in very rapid succession while armed that we can lose
parameter changes, but that is extremely unlikely.

This fixes an issue where parameter saves in flight can cause
considerable scheduling problems, sometimes several milliseconds
2018-08-16 12:40:10 +10:00
Andrew Tridgell a9c570702c AP_Param: fixed build warning 2018-07-09 19:41:18 +10:00
Lucas De Marchi 1a45aa12f5 AP_Param: warn on last pass only about unknown parameters
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Lucas De Marchi 7f0d5ddf21 AP_Param: stop panic()'ing on unknown parameters
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.

On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.

This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Peter Barker 83b918f1c3 AP_Param: make send_parameter_value_all a GCS method rather than static 2018-05-01 09:39:01 +10:00
Peter Barker 32795f0a8f AP_Param: correct possible use of nullptr during param count
::first can return nullptr
2018-04-02 14:12:09 +09:00
Andrew Tridgell c6c5603382 AP_Param: added back key dumping code
this is essential for working out conversion tables.
2018-01-24 18:23:59 +11:00
Michael du Breuil a1a5665213 AP_Param: Support marking a param group as ignoring the enable flag 2018-01-17 22:21:55 +00:00
Andrew Tridgell 51512ed7c0 AP_Param: don't panic on bad embedded parameters
this makes life much easier for vendors
2018-01-15 11:46:02 +11:00
Andrew Tridgell d0d6040b3e AP_Param: use wider range of sentinal values
this copes better with power off while writing parameters
2018-01-15 11:46:02 +11:00
Andrew Tridgell 4ac49483c8 AP_Param: added support for embedded parameters
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
2017-12-18 11:14:59 +11:00
Jacob Walser d5896287b7 AP_Param: Add set_by_name and set_and_save_by_name helpers 2017-10-25 21:07:09 +11:00
Peter Barker e3599ab4f9 AP_Param: remove CLI 2017-08-14 10:23:50 +09:00
Michael du Breuil 8de96ee4a1 AP_Param: Check for duplicate group id's before handling groups 2017-07-17 08:43:50 -07:00
Andrew Tridgell 60e4c0eb98 AP_Param: make count_parameters() thread safe 2017-05-01 14:36:10 +10:00
Andrew Tridgell 47803e73e4 AP_Param: allow for dynamic var_info tables
this allows the var_info entry in a table to be a constant pointer,
allowing the selection of a type for a parameter class at runtime.
2017-03-25 16:22:10 +11:00
Peter Barker c93942695f AP_Param: load parameters from a comma-separated-list
This patch will break things for anyone who is using
a comma in their filenames for their ardupilot defaults
files.
2017-02-23 22:46:33 -08:00
Peter Barker fe189fefbc AP_Param: Factor load_defaults_file (NFC) 2017-02-23 22:46:33 -08:00
Andrew Tridgell 79b0c856b2 AP_Param: added support for frame specific parameters
this allows for libraries that have parameters that are only activated
on particular frame types
2017-02-14 19:49:29 +11:00
murata 59454b0c6f AP_Param: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Andrew Tridgell 4687785185 AP_Param: fixed a bug in default file handling
this fixes a bug in how default file values are handled that affects
any common sub-objects. When we had a default value for something like
SERVO12_FUNCTION then configured_in_defaults_file() would return true
for SERVO1_FUNCTION as it shares a common default value pointer

this changes the implementation to use the object pointer instead
2017-01-24 09:50:25 +11:00
Peter Barker a481e52861 AP_Param: make configured() const 2017-01-20 13:02:53 +09:00
Pierre Kancir 5aa4bc4368 AP_Params: fix seg fault in debug function
otherwise at start, when loading paramter is could fail at AP_Param.cpp:611, Debug("scan past end of eeprom")"
2017-01-13 08:54:20 -08:00
Andrew Tridgell d005cbffd8 AP_Param: added convert_parent_class() 2017-01-12 17:39:37 +11:00
Andrew Tridgell 05e9462a9c AP_Param: added CONVERT_FLAG_REVERSE and CONVERT_FLAG_FORCE 2017-01-12 17:39:37 +11:00
Andrew Tridgell d430cd62a6 AP_Param: fixed loading defaults file after storage
make sure defaults don't override storage values
2017-01-12 17:39:37 +11:00
Andrew Tridgell 0c32178d07 AP_Param: added reload_defaults_file()
this allows defaults to be set for parameters in pointer objects
2017-01-12 17:39:37 +11:00