Gone4Dirt
b2d2bf61da
AP_Motors: Support autorotation windows on external governors
2020-05-20 21:56:09 -04:00
Gone4Dirt
98a4335af4
AP_Motors: Added support for autorotation
2019-11-29 08:06:10 +08:00
bnsgeyer
e91402aeb6
AP_Motors: tradheli-make all RSC params part of library
...
AP_Motors: Tradheli-fix RSC mode change while armed
AP_Motors: tradheli - improve RSC param metadata
AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
ChristopherOlson
b6bfc8947f
AP_Motors:Heli Governor - change rotor_rpm argument to a float
2019-06-03 07:53:01 +09:00
bnsgeyer
f1a32d7872
AP_Motors: Tradheli- modified thrcrv and gov parameter group names
2019-06-03 07:53:01 +09:00
ChristopherOlson
b1046c7b80
AP_Motors:Heli_RSC Governor - add method of droop compensation
...
- improve handling of outliers from speed sensor
- change governor_tc variable to governor_thrcurve
- remove equals zero from variable declarations
2019-06-03 07:53:01 +09:00
bnsgeyer
4120e29614
AP_Motors: Tradheli-complete conversion of throttle curve params to percent
...
add conversion for throttle curve params for upgrade
2019-06-03 07:53:01 +09:00
bnsgeyer
3629541a20
AP_Motors: Tradheli - implement enable params for throttle curve and governor
2019-06-03 07:53:01 +09:00
bnsgeyer
51d4029f03
AP_Motors: Tradheli - maintain consistent variable types as used in calcs
...
add override to declaration of new functions
2019-06-03 07:53:01 +09:00
ChristopherOlson
cca58e393a
AP_Motors:Heli_RSC - add support for rotor speed governor with droop speed control
2019-06-03 07:53:01 +09:00
bnsgeyer
690e8fd3f4
AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve
2018-03-27 09:07:03 +11:00
Andrew Tridgell
bdb9f062ae
AP_Motors: removed unused pwm parameters for heli
2018-01-21 21:12:13 +11:00
Andrew Tridgell
55d5fe843e
AP_Motors: added Heli_Quad backend
...
supporting collective pitch quadcopters
2017-10-03 10:16:41 +11:00
Andrew Tridgell
1ad5e1db4e
AP_Motors: integrate AP_MotorsHeli_Dual
...
fixed issues with combining with Heli_Single
2017-03-25 16:22:10 +11:00
Andrew Tridgell
638f1364be
AP_Motors: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
11975223dd
AP_Motors: added H_RSC_POWER_NEGC and H_RSC_SLEWRATE
...
this gives more control over throttle for petrol
helis. H_RSC_POWER_NEGC allows for a asymmetric V-curve, which allows
for less power being put into the head when landing or when sitting on
the ground. That can lead to significantly less vibration and chance
of ground oscillation. A heli not being flown with aerobatics does not
need to use high throttle at negative collective pitch.
The H_RSC_SLEWRATE allows for a maximum throttle slew rate to be
set. Some petrol motors can cut if the throttle is moved too
quickly. We had this happen at a height of 6m when switching from
ALT_HOLD to STABILIZE mode. It also lowers the chance of the blades
skewing in their holders with the sudden change of power when the heli
is disarmed. In general it is a bad idea to do instantaneous large
movements of a IC engine throttle.
2016-07-03 18:29:05 +10:00
Andrew Tridgell
255bda9f9c
AP_Motors: allow setting of loop rate
...
this allows for SCHED_LOOP_RATE in copter
2016-06-17 15:01:18 +10:00
Andrew Tridgell
f58d837026
AP_Motors: fixed heli RSC output range and float conversion
...
adds H_RSC_PWM_MIN, H_RSC_PWM_MAX and H_RSC_PWM_REV
2016-06-04 18:33:36 +10:00
Randy Mackay
832a226f13
AP_MotorsHeli_RSC: rotor speeds in 0 to 1 range
...
Also move recalc_scalers functionality into update_rotor_ramp and update_rotor_runup
2016-04-01 11:59:30 +09:00
Randy Mackay
4775843e3c
AP_MotorsHeli_RSC: add get_idle_output accessor
2016-04-01 11:59:30 +09:00
Lucas De Marchi
7d9153feb8
AP_Motors: replace header guard with pragma once
2016-03-16 18:40:42 +11:00
Randy Mackay
6c458b07cb
MotorsHeli_RSC: resolve compiler warning re init order
2016-01-07 12:31:49 +09:00
Andrew Tridgell
79c90d37f6
AP_Motors: apply HELI_RSC output type if available
2016-01-04 16:14:09 +11:00
Randy Mackay
cb47311416
MotorsHeli_RSC: add RotorControlMode enum
2015-08-31 11:43:58 +09:00
Randy Mackay
72efc85ee8
MotorsHeli_RSC: RotorControlState enum
2015-08-31 11:43:57 +09:00
Robert Lefebvre
3756c6b3f3
AP_MotorsHeli: Create RSC Throttle Curve mode for controlling gas engines.
2015-08-31 11:43:45 +09:00
Robert Lefebvre
315f0408ae
AP_MotorsHeli: RSC controller to use speed ramp as simple float scalar
2015-08-31 11:27:52 +09:00
Robert Lefebvre
91c7663ca2
AP_MotorsHeli: Set range of new RSC Servo object.
2015-08-31 11:27:51 +09:00
Robert Lefebvre
ed08e9d531
AP_MotorsHeli_RSC: Split out rotor speed estimate into it's own function
2015-08-31 11:27:46 +09:00
Robert Lefebvre
77e4bf39aa
AP_MotorsHeli: rework RSC output() function to implement idle speed function
...
Also, split out speed_ramp function
2015-08-31 11:27:44 +09:00
Robert Lefebvre
27f8d6bcd5
AP_MotorsHeli: Change RSC output() function into a state machine.
2015-08-31 11:27:40 +09:00
Robert Lefebvre
457d939e77
AP_MotorsHeli: Update includes so that it builds
2015-08-31 11:27:37 +09:00
Fredrik Hedberg
1e8be73a27
AP_Motors: Fix formatting in AP_MotorsHeli_RSC.
2015-08-31 11:27:34 +09:00
Fredrik Hedberg
ae9a16dc27
AP_Motors: Move rotor speed control into AP_MotorsHeli_RSC.
2015-08-31 11:27:28 +09:00