Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,248 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

68 Commits

Author SHA1 Message Date
Andrew Tridgell d9457ecc38 MAVLink: send time of GPS fix accurately 
when we send a GPS_RAW message, set the usec field to the time we got
the fix from the GPS, not the current time. This makes it possible for
aerial photo processing to be more accurate, as the usec field with
more accurately reflect the planes position/time pair
 2012-05-23 17:33:33 +10:00
Andrew Tridgell 8e01bc3593 MAVlink: update ArduPlane for param fetch during DataFlash erase 
same changes as for ArduCopter
 2012-05-22 16:13:35 +10:00
Michael Oborne 218e70cd8b AP - fix attitude level hil mavlink 1.0 issue 2012-05-06 11:05:35 +08:00
Andrew Tridgell b6a475f6a5 MAVLink: make APM build with MAVLink 1.0 possible with arduino GUI 2012-04-24 22:24:58 +10:00
Andrew Tridgell 95be2c5922 APM: updates for MAVLink 1.0 2012-04-24 19:54:20 +10:00
Andrew Tridgell 8e6fdb8981 APM: use OutputCh_current() in MAVLink servo logging 
this gives a more accurate picture of what is actually happening with
the servos
 2012-04-24 10:57:43 +10:00
Michael Oborne 8d797fec3c fix potential null pointer 2012-04-20 17:57:06 +08:00
Andrew Tridgell e1270401bf MAVLink: make parameter send use adaptive stream rate 
this makes it possible to fetch parameters with very low air data
rates
 2012-04-02 11:18:53 +10:00
Andrew Tridgell 7b50724f60 MAVLink: allow for find grained stream rate control 
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
 2012-04-02 11:18:53 +10:00
Andrew Tridgell e0bb7e2777 MAVLink: don't waste 100 bytes of bandwidth sending 1 byte of information 
the GPS_STATUS message is a massive waste of bandwidth, but it is the
only message that tells us the number of visible satellites. So only
send it if that information changes.

This makes MAVLink work better at low baud rates
 2012-03-30 17:46:20 +11:00
Andrew Tridgell 4c4c38f69a APM: Added MANUAL_LEVEL option 
when MANUAL_LEVEL is set to 1, we don't do accelerometer levelling at
startup, and instead used the values saved in the EEPROM. This makes
it easier to do levelling on the bench, or once for a series of
flights for the day
 2012-03-29 12:39:53 +11:00
Andrew Tridgell 34506b170f Mavlink: fixed warnings about limits on int32 values 2012-03-27 15:37:25 +11:00
Andrew Tridgell 458d55e5bc MAVLink: constrain variable changes to the datatype range 
if someone tries to set a AP_Int16 to a value of 300000, they now get
32767 instead of -27678
 2012-03-19 17:29:02 +11:00
Andrew Tridgell 8afd196907 APM: adapt ArduPlane for AHRS framework 2012-03-19 17:29:02 +11:00
Andrew Tridgell d75e883fe8 GCS: get_integrator() is now get_gyro_drift() in DCM 2012-03-10 10:34:33 +11:00
Andrew Tridgell 13d5839778 APM: removed quaternion special cases 2012-03-10 10:34:32 +11:00
Andrew Tridgell e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
Andrew Tridgell b455443e2c APM: added logging of DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell 690dc9052a GCS: force scalar type in copy_name() 
this enables access to compass offsets over MAVLink
 2012-02-25 11:37:20 +11:00
Andrew Tridgell df8a557630 AP_Param: update users of AP_Param for ParamToken 2012-02-19 17:05:28 +11:00
Andrew Tridgell 78babd37fa APM: use set_and_save_ifchanged() for GCS stream rates 
this avoids a lot of EEPROM scan operations when the groundstation
updates the stream rates
 2012-02-18 10:51:57 +11:00
Andrew Tridgell c662140a2b APM: report the nav_bearing as hold_course when enabled 
this gives a more accurate view of the navigation code, as when
hold_course is not -1 it overrides nav_bearing
 2012-02-15 08:50:45 +11:00
Andrew Tridgell c042ef1298 APM: fixed some build warnings 2012-02-14 08:58:56 +11:00
Andrew Tridgell 8d1729b3ba Mavlink: report the corrected pitch via MAVLink 
this subtracts the TRIM_PITCH_CD from the pitch reported via
MAVLink. That gives a better indication of the true pitch in the tlog
 2012-02-14 08:58:56 +11:00
Andrew Tridgell ecdbfd257a token is 16 bits now 2012-02-13 16:22:53 +11:00
Andrew Tridgell 0b3e3ec5c8 added group indexes to GCS_MAVLINK class 2012-02-13 16:22:52 +11:00
Andrew Tridgell bc0ed62aa9 adapt mainline APM code to AP_Param 2012-02-13 16:22:51 +11:00
Sandro Benigno 3200781f56 Battery monitor type 3 cannot calculate battery remaining properly, due it uses only voltage reading. This path set battery_remaining to a value out-of-band for that type of monitoring. It informs to external devices to not show that info. 2012-02-11 21:01:13 -02:00
Michael Oborne 6b949511ca change rc norm_output to scale evenly across the entire range 2012-01-20 16:24:55 +08:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Michael Oborne cd145fd7a9 add circle to output modes 2011-12-29 18:21:32 +08:00
Andrew Tridgell 42522baf9f geofence: store fence points as int32_t 
this keeps maximum precision in fence boundaries
 2011-12-16 20:11:51 +11:00
Andrew Tridgell fc495ce6a7 geofence: added fence status reporting and faster altitude check 2011-12-16 20:11:51 +11:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code 
this implements the primary logic of geo-fencing
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 84a694efb9 only check for "enter 3 times" in first 20s after boot 
we don't want stray bytes on serial3 to make us enter the CLI during
flight!
 2011-12-16 20:09:32 +11:00
Andrew Tridgell 8cd13749bd MAVLink: fixed link flood on waypoint upload 2011-12-13 20:39:04 +11:00
Andrew Tridgell d5c23c83cf apm2: fixed for new barometer code 2011-12-11 15:21:10 -08:00
Andrew Tridgell 39a36fe946 fixed the "reboot on GPS lock" bug 
the problem was that with APM2 we may not have a 2nd GCS instance. The
"gps alt: xxx" message was being unconditionally sent to both GCS
instances, which caused a crash
 2011-12-04 09:06:58 +11:00
Andrew Tridgell 838c57cd1a mavlink: paranoia setting of failsafe when forcing AUTO mode 
this shouldn't be needed, but will do no harm, and I thought I saw
this fail in a test
 2011-11-28 16:22:33 +11:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 8ef364657b MAVLink: fixed throttle display in VFR_HUD 2011-11-21 20:29:19 +11:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Andrew Tridgell 9eb27c2573 GCS: fixed timeout loading waypoints 
while loading waypoints we could saturate the link
 2011-10-31 21:25:35 +11:00
Michael Oborne 3f3c04f95b Add MAVLINK_MSG_ID_HIL_STATE message 2011-10-30 18:17:37 +08:00
Andrew Tridgell d9ae4e4e6e MAVLink: use new MAV_MODE_FLAG_CUSTOM_MODE_ENABLED flag 
this enables us to tell if custom_mode is set
 2011-10-30 13:00:54 +11:00
Andrew Tridgell 580647b1de use C++ tricks to minimise differences for MAVLink 1.0 
this should make maintainence/testing a bit easier
 2011-10-30 11:48:56 +11:00
Doug Weibel 645b9c1d48 Initial rewrite of command logic. 
Changes mission structure so that conditional and immediate commands are located between associated waypoints instead of after the second waypoint.
 2011-10-27 13:45:52 -06:00
Andrew Tridgell 5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Andrew Tridgell 2b9daf65ff mavlink: fixed WP upload 
The previous code accepted arbitrary command codes here, and ACKed
them. Later we should specifically list which ones are OK
 2011-10-26 12:18:24 +11:00
Andrew Tridgell 5a089f98d2 MAVLink: MAVLink 1.0 support now builds 
not testing at all - so be careful!
 2011-10-24 12:21:26 +11:00