5d4b8d9913
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1840 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 04:44:00 +00:00
5ef54d2de4
found the issue with stability - something to do with APVar.
...
commenting out setup_show(NULL,NULL); in startup_ground() causes some values to misload???
Or maybe it's a delay thing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1839 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-03 00:47:20 +00:00
6b405c5831
minor change to GPS
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1834 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-02 19:56:35 +00:00
f2a9d38393
Y6 frame, motors changed to All TOP CCW / BOTTOM CW
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1833 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-01 14:45:35 +00:00
bae1c531d0
ADC Library - reimplement overflow
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1832 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-31 14:19:59 +00:00
72fc8a1f51
Added interactive control for altitude in Loiter (position hold) and Altitude hold (mostly just used for testing).
...
Throttle down = descend, throttle high = ascend.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1831 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 05:27:13 +00:00
294d6752fe
Hopefully this fixes the GPS init bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1830 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-30 04:24:20 +00:00
cdcee09e0d
Fix adc issue causing serial problems/other issues. (DOUG please check)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1829 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-29 11:16:21 +00:00
c8281da5ec
FastSerial Fix
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1826 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-29 00:08:27 +00:00
63f8491ad3
RC_3 - the throttle channel dead zone upped to 60 to avoid noise issues
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1825 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 16:11:08 +00:00
f8a718e645
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1824 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 05:18:10 +00:00
2a4cb2095f
GPS is disabled in this version to debug some bad behavior. If it doesn't stabilize well. Let me know.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1823 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-28 04:12:19 +00:00
6ee6000302
Temp revert to previous version, while I hunt down a bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1822 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 23:34:50 +00:00
eee391e6d9
implementing yaw tracking.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1821 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 21:26:34 +00:00
2c17164de4
Configurator.Net: Fixed Occlusion of Mag Enable check box
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1820 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 14:54:06 +00:00
eead295208
Better implementation of the GPS sensing.
...
You must now be on the ground and before you cant set the initial angle for Simple mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1819 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-27 06:24:53 +00:00
8daed835c8
Configurator.Net: Label changes only
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1818 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:48:12 +00:00
17c6acd310
reformatted
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1817 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:05:02 +00:00
8ca3ab6f62
Revved the firmware version.
...
Updated the motor spin up issue - this is the I've not set my radio up properly issue.
updated 200ms motor spin up issue with the Libraries - for those who have ESC's that don't do sanity checks.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1816 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 21:03:20 +00:00
46e8c2e67a
GPS Light fix
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 06:53:27 +00:00
f8b0c61e63
updates - support
...
new test mission - Liftoff, spin, land
updated scripted Yaw control
Public Beta candidate...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-26 06:35:52 +00:00
43cd36e5b6
Added back some APO libraries.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1813 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-25 17:08:35 +00:00
0a00e4ff21
Print the key associated with a variable when the variable is printed using AP_Var_menu_show.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1812 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-25 02:51:03 +00:00
76a5a48206
Add an interface for locating a variable by key.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1811 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-25 02:46:45 +00:00
250c800187
Yaw fix for Max Y6
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1810 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-24 01:36:52 +00:00
596b33a08b
Change waypoint/command storage to include options byte.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1809 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-23 03:29:46 +00:00
bf507ffe6d
cleaning my branches for updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1807 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-22 04:27:25 +00:00
28e363b634
undid accidentical commit of local changes
...
sorry about that!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1806 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:35:54 +00:00
2754a32000
fixed printf() format error
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1805 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:59 +00:00
857ca3f5be
separate out automatic reset of modes and radio
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1804 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:51 +00:00
2937acc2a2
added ALWAYS_RESET_SETTINGS
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1803 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:45 +00:00
c8fd23ac45
allow configuration of motor arming condition
...
This allows the user to configure their own motor arming condition in
APM_Config.h. For example, the user could set it up for MODE1
transmitters, by using:
#define MOTOR_ARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in > 2700)
#define MOTOR_DISARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in < -2700)
You could also set it up to use the "throttle cut" switch on a
transmitter, by mapping that to a spare channel.
The default (throttle minimum and maximum/minimum yaw) is the same as
it was before
This patch also adds reporting of motor arming to the GCS, which can
be useful for testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1802 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:38 +00:00
828f97f474
tridge: report mode switch changes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1801 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:32 +00:00
216379e286
tridge: my config
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1800 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:24 +00:00
ae9ae7f946
adapt send_text() for typesafe PSTR()
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1799 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:26:59 +00:00
a633617eef
added -Wformat in Arduino.mk
...
when building with 'make' we get warnings related to printf() format
strings
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1798 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:26:03 +00:00
860998d337
implemented typesafe PSTR()
...
This makes PSTR() type safe by using a 1 byte wrapper
structure. Attempts to use the wrong varient of a print function will
generate a compilation error.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1797 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:25:48 +00:00
66c86e9a87
a basic mission uploader
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1796 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 00:51:43 +00:00
5008c1656b
MavLink Update
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1795 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-20 23:28:42 +00:00
ed202447e6
a basic mission uploader
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1794 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-20 21:56:48 +00:00
bb285a248b
implement mavlink messages
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1793 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-20 12:55:51 +00:00
783656b574
Added Y6 support
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1792 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 19:21:43 +00:00
2850ac6c74
mavlink: support MAV_FRAME_GLOBAL_RELATIVE_ALT
...
this allows for relative altitude, but global lat/lon
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1791 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:23:08 +00:00
d70703aa62
disabled tabs in emacs formatting markers
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1790 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:20:11 +00:00
f9469507c0
make it possible to enable RC override on non-HIL setups
...
this makes it possible to allow a GCS to override RC input values for
non-HIL setups. This gives a way for a GCS to set an arbitrary switch
value, or set a precise PWM value for any control.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1789 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:18:21 +00:00
f0458631a3
added send_text_P()
...
this merges the send_text_P() updates from APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1788 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:14:15 +00:00
8ca4986375
mavlink: merged in changes from APM
...
this fixes waypoint upload
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1787 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 08:05:06 +00:00
2427931550
added update_events() prototype
...
this fixes a build error on Linux. See the equivalent commit in APM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1786 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:46 +00:00
51df8d1d9d
HIL: fixed a build error with HIL
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1785 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:39 +00:00
613d414908
mavlink: reduce the number of message buffers to 2
...
this is all we need, and it saves us some SRAM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1784 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:33 +00:00
jasonshort
levinemax@gmail.com
mich146@hotmail.com
mandrolic
james.goppert
DrZiplok
deweibel@gmail.com
jphelirc
tridge60@gmail.com