Commit Graph

91 Commits

Author SHA1 Message Date
Hayden Donald 79b596d229 AP_Periph: Prepare reboot before rebooting via AP_Periph:reboot()
Call AP_Periph:prepare_reboot() before rebooting via AP_Periph:reboot()
2024-11-19 16:08:40 +11:00
bugobliterator b05a6c00b6 AP_Periph: add support for publishing raw imu data 2024-10-23 06:46:22 +09:00
Bob Long 230269bed8 HAL_ChibiOS: add adjustable wdg timeout for hwdefs
This allows the watchdog timeout to be adjusted in the hwdef.dat file,
so that critical nodes like ESCs can recover more quickly.
2024-07-23 19:53:38 +10:00
Andrew Tridgell 94841dd608 Tools: use NEW_NOTHROW for new(std::nothrow) 2024-06-04 09:20:21 +10:00
Iampete1 13cbffebcc AP_Periph: allow airspeed without I2C 2024-05-08 17:15:14 +10:00
Gone4Dirt 853bfbf64d AP_Periph: Add support for up to two rangefinders 2024-04-17 17:06:42 +10:00
Peter Barker c450de6e96 AP_Periph: add assert that AP_CHECK_FIRMWARE_ENABLED is set 2024-03-26 10:50:11 +11:00
Peter Barker 7e1a3ae4dc Tools: allow forwards/backwards for DroneCAN type autoconfig
ArduPilot configures a connected DroneCAN GPS based on its GPS Type.

Given parameter name changes, ArduPilot must be able to configure both new and old AP_Periphs, and new AP_Periphs have to cope with being configured by old ArduPilots.
2024-03-19 19:50:12 +11:00
Peter Barker 7e4d9f2893 AP_Periph: stop passing serial manager to GPS init
it can get this via the singleton
2024-03-19 07:28:55 +11:00
Peter Barker bdb84181bc Tools: move logger object up to AP_Vehicle 2024-02-13 10:54:29 +11:00
Andrew Tridgell 59fe2c9d4e AP_Periph: added reboot for scripting 2024-01-21 12:30:08 +11:00
Andrew Tridgell 44bc523db8 AP_Periph: added support for PPP gatewate peripheral 2024-01-12 14:23:34 -08:00
Iampete1 a5f2076d21 Tools: AP_Periph: add support for relay via incoming hardpoint command 2024-01-10 18:29:24 +11:00
Andrew Tridgell 83cfcd841b AP_Periph: added support for SERIAL_OPTIONS
allows for options and flow control per serial port
2023-12-27 05:13:14 -07:00
Tom Pittenger 0b60777db6 AP_Periph: add Networking-UART passthrough 2023-11-26 11:28:57 +11:00
Peter Barker d27bb9d606 Tools: allow more libraries to compile with no HAL_GCS_ENABLED 2023-09-05 22:23:51 +10:00
Andrew Tridgell 0c38dada6c AP_Periph: re-structure peripheral code
split into separate cpp files and avoid static functions
2023-09-01 13:04:59 +10:00
Tom Pittenger 4f2344f397 AP_Peirph: fix battery parameters 2023-08-28 09:14:33 -07:00
Andrew Tridgell bc825fb4c1 AP_Periph: added battery balance plug node
this supports a periph node attached to a LiPo battery balance plug,
reporting via BatteryInfoAux
2023-08-26 21:12:42 +10:00
Andrew Tridgell c151d9bc3d Tools: removed native_millis/micros 2023-08-24 13:06:40 +10:00
Peter Barker ee0a49bb7c AP_Periph: add support for DroneCAN RCInput packets 2023-08-19 20:27:24 +10:00
Tom Pittenger 1a67775c52 AP_Periph: add AP_RPM support
Co-authored-by: Samuel Tabor <samuel.tabor@krausaerospace.com>
2023-08-11 13:31:45 -07:00
Tom Pittenger 88cc72f0ee AP_Periph: add networking 2023-08-06 09:20:08 +10:00
Tom Pittenger 3bd1b3f7ed AP_Periph: add support for Networking 2023-08-06 09:20:08 +10:00
bugobliterator b6605f5877 AP_Periph: add CAN and Protocol statistics send 2023-07-10 12:56:37 +10:00
Peter Barker 5a33f870c0 Tools: use HAL_PROXIMITY_ENABLED in place of HAL_PERIPH_ENABLE_PRX
boolean truth rather than defines, and simplifies code
2023-06-08 11:53:01 +10:00
Michael du Breuil e2d0cc55d0 AP_Periph: Support APD ESC telemetry 2023-05-25 17:35:27 -07:00
Tom Pittenger 34a990d2ff AP_Periph: add AP_KDECAN support 2023-04-17 11:52:52 +10:00
Peter Barker ba3aa0c158 AP_Periph: add and use a "bool read(c)" method to AP_HAL
this is much less likely to not work vs the int16_t equivalent
2023-03-22 17:59:11 +11:00
Andrew Tridgell a4a52c3e8c AP_Periph: cope with peripherals with i2c only rangefinders
if no uart then still check for non-uart sensors
2023-03-06 19:48:07 +11:00
Tom Pittenger 95b4ded3e8 AP_Periph: add AP_NMEA_Output to Periph 2023-02-07 21:12:07 +11:00
rishabsingh3003 59bc3cff93 AP_Periph: Allow user to change serial port for HW Telem 2023-01-25 18:15:28 +11:00
Iampete1 cb6891821e AP_Periph: always call airspeed init to allow param conversion 2023-01-03 10:17:56 +11:00
rishabsingh3003 27f55ae626 AP_Periph: Add proximity support 2022-12-15 07:20:05 +11:00
Tom Pittenger 3f4755ea7b AP_Periph: add support for AP_TemperatureSensor 2022-10-18 10:05:31 +11:00
Andrew Tridgell 2f3fe19aca AP_Periph: use AP_CheckFirmware 2022-08-15 09:18:34 +10:00
Andrew Tridgell f728894eec AP_Periph: added EFI support 2022-06-09 21:10:37 +10:00
Pradeep 80e2533cf0 AP_Periph: node stats
- Added new config parameter object - STAT
 - init and update statistics
2022-06-07 09:57:32 +10:00
bugobliterator 068208e4d7 AP_Periph: add debug option for hold in bootloader after 15s 2022-03-11 18:13:54 +11:00
Andrew Tridgell 94d02faf37 AP_Periph: fixed build for include changes 2022-02-22 12:13:19 +11:00
Nathan Costa a867e04116 AP_Periph: airspeed add support for CAN/I2C switch and LED 2022-02-16 13:25:58 +11:00
Andrew Tridgell c2dd7f4c9e AP_Periph: fixed LED setup call 2022-01-27 08:26:47 +11:00
Joshua Henderson 92aff3bded AP_Periph: use airspeed.set_log_bit() 2022-01-19 18:21:32 +11:00
Peter Barker 8ae1a58eae Tools: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker 32374d1614 Tools: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Tom Pittenger a7686de92b AP_Periph: fix GCS/mavlink for additional serialports 2021-09-30 14:55:01 +10:00
bugobliterator 8a4b9c2b36 AP_Periph: add support for handling Notify State message 2021-09-30 08:52:27 +10:00
Peter Barker 76e2db952b Tools: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
bugobliterator bb65ab83be AP_Periph: reduce Rx latency by reading while sitting in delay 2021-08-19 14:20:58 +10:00
bugobliterator aa9a40acf5 AP_Periph: add a way to transmit MovingBaseline Data on another port 2021-08-19 14:20:58 +10:00