Andrew Tridgell
9c16e30178
AP_BattMonitor: added SUI SMBUS battery backend
...
originally by Kelly Schrock
2020-05-06 15:48:04 +09:00
Randy Mackay
6f77a75be5
AP_BattMonitor: set default I2C bus for Solo and Maxell drivers
2020-05-06 15:47:26 +09:00
Randy Mackay
0edc341231
AP_BattMonitor: Maxell cell voltages timeout after 5sec
2020-05-06 15:47:22 +09:00
Randy Mackay
51cab958b9
AP_Scripting: example to check battery cycle count
2020-05-06 15:47:17 +09:00
Randy Mackay
f7a89ae055
AP_Scripting: add binding for BattMonitor's get_cycle_count method
2020-05-06 15:47:12 +09:00
murata
4192ec1700
AP_BattMonitor: Maxell battery on any I2C bus
2020-05-06 15:47:08 +09:00
Randy Mackay
30a0f22d13
AP_BattMonitor: add cycle count for smbus batteries
2020-05-06 15:47:05 +09:00
Andrew Tridgell
ede5cabbf5
HAL_ChibiOS: save 3k of flash on MatekF405-Wing
...
disable SMBUS and fuel battery monitors
2020-05-06 15:46:13 +09:00
Andrew Tridgell
943e495f34
AP_BattMonitor: support selective enable of SMBUS and fuel battery monitors
2020-05-06 15:46:10 +09:00
Andrew Tridgell
d40671b8d8
AP_Terrain: added script for creating terrain *.dat files
...
useful for pre-populating a microSD card
2020-05-06 15:35:00 +09:00
Andrew Tridgell
8efe7c1b71
AP_Terrain: fixed bug in disk offset calculation
...
this fixes a problem where two different locations could both be
mapped to the same disk block in the terrain/*.DAT files. That meant
that pre-filled terrain on the microSD card would sometimes require a
download in flight. It also means that a RTL with loss of GCS could
sometimes fly through a region with no terrain data available
Other changes in this patch:
- allow for a 2cm discrepancy in the lat/lon of the grid
corners. This is needed to allow for slightly different floating
point rounding in tools that pre-generate terrain data to load on
the microSD
- added TERRAIN_OPTIONS parameter to allow the user to disable
attempts to download new terrain data. This is mostly useful for
testing to validate a terrain generator
2020-05-06 15:34:57 +09:00
Paul Riseborough
9cd7cf4c01
AP_NavEKF3: Don't use geomag data when user specifies declination
2020-05-06 15:31:02 +09:00
Paul Riseborough
117b2629a9
AP_NavEKF2: Don't use geomag data when user specifies declination
2020-05-06 15:30:59 +09:00
Paul Riseborough
db90cf5fb0
AP_Compass: Add accessor function for COMPASS_AUTODEC
2020-05-06 15:30:56 +09:00
Randy Mackay
e87e16cc0f
AP_NavEKF3: getLLH fix when no GPS available
2020-05-06 15:29:11 +09:00
Randy Mackay
a6b825324a
AP_NavEKF2: getLLH fix when no GPS available
2020-05-06 15:29:08 +09:00
Andrew Tridgell
12c0d452e9
AP_RCProtocol: fixed buffer overflow in st24 parser
...
found using random data injection in SITL
2020-05-06 15:21:49 +09:00
murata
5b9fc1b146
AP_Baro: Fix timestamp wrapping
2020-05-06 15:15:56 +09:00
Andrew Tridgell
481852d608
AP_Compass: change RM3100 device ID
...
changed scale factor means users need to recalibrate
2020-05-06 15:12:11 +09:00
Andrew Tridgell
8787ca868a
AP_Compass: fixed scaling of RM3100
...
scale factor was off by 200/256, resulting in COMPASS_SCALE of about
1.28
thanks to Arace for noticing
2020-05-06 15:12:08 +09:00
Andrew Tridgell
8be1755b12
AP_NavEKF3: make mag variance reporting consistent
...
logged scaled variance should match the value used in MAVLink
EKF_STATUS_REPORT
2020-05-06 15:07:56 +09:00
Andrew Tridgell
6e5f61935c
AP_NavEKF2: make mag variance reporting consistent
...
logged scaled variance should match the value used in MAVLink
EKF_STATUS_REPORT
2020-05-06 15:07:53 +09:00
bugobliterator
531cf5f3fb
AP_Scripting: remove unused user of realloc from lua
2020-05-06 15:00:54 +09:00
bugobliterator
9073f0ffb4
HAL_ChibiOS: deprecate realloc for ChibiOS build, so as to return error when used
2020-05-06 15:00:51 +09:00
bugobliterator
cf0c6d3247
AP_HAL: ensure libc realloc is available for all platforms except ChibiOS
2020-05-06 15:00:47 +09:00
bugobliterator
a9ea7ca3dc
AP_HAL_ChibiOS: implement standard realloc method
2020-05-06 14:59:45 +09:00
bugobliterator
792fe2697a
AP_HAL: implement standard realloc method
2020-05-06 14:59:42 +09:00
bugobliterator
c093af9ea5
AP_Common: use standard realloc method from HAL
2020-05-06 14:59:39 +09:00
Andrew Tridgell
384571ddf2
GCS_MAVLink: send only old value for readonly param set
...
this prevents a condition where the GCS can display the wrong value if
the 2nd PARAM_VALUE is lost
Note that groundstations can tell the set failed due to readonly in
the following ways:
1) look for the statustext: Param write denied (PARAMNAME)
2) see that the value came back with the old value, with index of
65535
3) can repeat the send, looking for (1) and (2)
Michael has proposed we add a PARAM_VALUE mavlink2 flags
extension. That would be nice, but we should still make this change to
fix the issue with mavlink 1.0
2020-05-06 14:41:34 +09:00
Peter Hall
33af883275
AP_Motors: MotorsMulticopter fix floating boost output
2020-05-06 14:36:14 +09:00
Peter Barker
96c97589ae
GCS_MAVLink: divide time allowed to send messages fairly
2020-05-06 14:34:21 +09:00
Randy Mackay
d0ff724b46
AP_LandingGear: add OPTIONS param to auto deploy and retract
2020-05-06 14:32:44 +09:00
Bill Geyer
23fc62a2d4
AC_AttitudeControlHeli: update filter parameter desc mins
2020-05-06 14:31:06 +09:00
Randy Mackay
ab8b482bcd
AC_AttitudeControl: update param ranges
2020-05-06 14:31:02 +09:00
Randy Mackay
9fe8e01fe4
AP_Mount: ignore rc trim when calculating desired mount angles
2020-05-06 14:27:01 +09:00
Randy Mackay
52520d9c28
RC_Channel: formatting fixes
2020-05-06 14:26:58 +09:00
Randy Mackay
1ee5862f6d
RC_Channel: add norm_input_ignore_trim
...
same as norm_input but ignores the trim value
2020-05-06 14:26:55 +09:00
bnsgeyer
7b1e34d219
AC_WPNAV:make speed changes during missions obey WPNAV_ACCEL
...
Includes commits by rmackay9
AC_WPNav: fixup max speed acceleration
AC_WPNav: simplify the initialisation of poscontrol's max speed
Changed at Leonard's request to keep things simpler
2020-05-06 14:22:23 +09:00
Randy Mackay
5eb54ddfd2
AC_PosControl: allow smaller changes in max speed and accel
...
also small changes in max speed for z-axis
2020-05-06 14:22:21 +09:00
Andrew Tridgell
fe8398fe0d
HAL_ChibiOS: use default USB IDs for fmuv3
2020-05-06 14:20:50 +09:00
Andrew Tridgell
aafed565f3
AP_NavEKF3: fixed use of antenna position when switching GPS primary
...
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.
This fixes that (trivial fix) and also fixes a similar issue on
position reset
2020-05-06 14:17:26 +09:00
Andrew Tridgell
2cf3ad4a3d
AP_NavEKF2: fixed use of antenna position when switching GPS primary
...
when GPS primary switches we were using a position which had not been
corrected for antenna offset. This was used for calculating the reset
for sensor change.
This fixes that (trivial fix) and also fixes a similar issue on
position reset
2020-05-06 14:17:21 +09:00
Matt Lawrence
31b98d5d97
AP_Camera: Make trigger type enum class
2020-05-06 14:14:23 +09:00
Matt Lawrence
fd9d4a012d
RC_Channel: Add GoPro mode toggle Aux switch
2020-05-06 14:14:11 +09:00
Matt Lawrence
0bef5bd9dd
GCS_Mavlink: Add routing for GoPro heartbeat
2020-05-06 14:09:16 +09:00
Matt Lawrence
5fe19911bf
AP_Camera: Add handling of GoPro mavlink commands
2020-05-06 14:09:13 +09:00
Matt Lawrence
e23e798eb9
AP_HAL_ChibiOS: Fix waf --default-parameters
...
If a defaults.parm file was present in the hwdef, waf ignored the --default-parameters=xyz.parm command line argument. This will allow it to use that command line argument specified file.
2020-05-06 14:07:00 +09:00
ashvath
f59bbc1c9e
Copter: function for mot_pwm checks
2020-05-06 14:00:12 +09:00
Andrew Tridgell
ac51e2b02b
AP_GPS: fixed yaw error when one GPS has zero position
...
the M_PI correction was only valid for one zero side. Much simpler to
always calculate difference
2020-05-06 13:58:04 +09:00
Andrew Tridgell
804949707d
HAL_SITL: added betaflight-x-rev frame type
2020-05-06 13:54:11 +09:00
Andrew Tridgell
b072190cf8
SITL: added betaflight-rev-x frame
2020-05-06 13:54:06 +09:00
Andrew Tridgell
67ffb30954
AP_Motors: added betaflight-x-reversed frame type
2020-05-06 13:53:56 +09:00
Andrew Tridgell
1cbad0c86e
SRV_Channel: change function to AP_Int16
...
this also removes the old parameter conversion code used for when we
first added the SERVO parameters. This was needed for conversion from
Copter 3.4 and Plane 3.7
2020-04-21 08:03:01 +09:00
Andrew Tridgell
8255517e3a
AP_Param: added convert_parameter_width()
...
this allows for easy conversion of the width of a parameter without
changing indexes
2020-04-21 08:03:01 +09:00
Peter Hall
ac1c4a3b2c
SRV_Channel: add missing ProfiLED description values
2020-04-21 08:03:01 +09:00
Peter Hall
81a95e2a71
AP_Scripting: Add led matrix examples
2020-04-21 08:03:01 +09:00
Peter Hall
4b84e749ad
AP_Scripting: update LED_roll example
2020-04-21 08:03:01 +09:00
Peter Hall
21cfe5a3d6
AP_HAL_SITL: update function names
2020-04-21 08:03:01 +09:00
Peter Hall
7dacfcc198
AP_HAL_ChibiOS: add support for ProfiLEDs
2020-04-21 08:03:01 +09:00
Peter Hall
a42b459b27
AP_HAL: support ProfiLEDs
2020-04-21 08:03:01 +09:00
Peter Hall
fa1b8cb792
AP_Notify: support ProfiLEDs
2020-04-21 08:03:01 +09:00
Peter Hall
473bd4c9ee
AP_Scripting: regenerate bindings
2020-04-21 08:03:01 +09:00
Peter Hall
33bef0f884
AP_Scripting: support ProfiLEDs
2020-04-21 08:03:01 +09:00
Peter Hall
d8501c4031
AP_SerialLED: support ProfiLEDs
2020-04-21 08:03:01 +09:00
Peter Hall
3f0eeaf6d9
SRV_Channel: add ProfiLED ouputs
2020-04-21 08:03:01 +09:00
Andrew Tridgell
71ef4ef231
AP_SerialLED: added define for LED limit
2020-04-21 08:03:01 +09:00
Andrew Tridgell
59bf162572
HAL_ChibiOS: reserve plenty of DMA memory for luminousbee4
2020-04-21 08:03:01 +09:00
Andrew Tridgell
434ad4e990
AP_SerialLED: allow more than 32 LEDs
2020-04-21 08:03:01 +09:00
Andrew Tridgell
18a9dce6e9
AP_Scripting: adjust for updated LED API
2020-04-21 08:03:01 +09:00
Andrew Tridgell
8ea159fe4e
AP_Notify: allow up to 64 LEDs on a pin
2020-04-21 08:03:01 +09:00
Andrew Tridgell
b26233495f
HAL_SITL: allow more than 32 LEDs on a pin
2020-04-21 08:03:01 +09:00
Andrew Tridgell
b219ee453c
HAL_ChibiOS: allow more than 32 WS2812 LEDs on a pin
2020-04-21 08:03:01 +09:00
Andrew Tridgell
cdee5f8b0e
AP_HAL: adjust LED API to allow more than 32 LEDs on a pin
2020-04-21 08:03:01 +09:00
Andrew Tridgell
e26860bd09
HAL_ChibiOS: added luminousbee4 flight controller
2020-04-21 08:03:01 +09:00
Peter Hall
eb85d98b4d
AP_Scripting: regenerate bindings
2020-04-07 09:05:35 +10:00
Peter Hall
389f28d937
AP_Scripting: correct generator bug
2020-04-07 09:05:35 +10:00
Peter Barker
b9804be01c
AP_HAL_ChibiOS: make a static-const hal a reference to the external symbol
2020-03-03 20:35:57 +09:00
Andrew Tridgell
43c8efd820
HAL_ChibiOS: switched to new USB VID for dual-CDC boards
2020-02-20 13:03:57 +11:00
Andrew Tridgell
2ed21b3be1
HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal
2020-02-20 13:03:09 +11:00
Andrew Tridgell
6d8482bc2e
HAL_ChibiOS: produce more accurate clocks for DShot and PWM
2020-02-20 13:02:09 +11:00
Andrew Tridgell
ca1053a28c
HAL_ChibiOS: raised timer clocks to 200MHz
...
this gives more flexibility in setting up timers for DShot
2020-02-20 13:01:00 +11:00
Andrew Tridgell
d3ee8c8795
GCS_MAVLink: don't send statustext from other than main thread
...
This fixes high stack usage in the RCIN thread when it notifies the
GCS of a new RCIN protocol. The problem is severe when signing is
enabled, as signing adds over 500 bytes to stack cost of sending a
mavlink msg
fixes issue #13615
2020-02-20 12:59:01 +11:00
Randy Mackay
10ef74172c
AP_ServoRelayEvents: do-set-servo affects sprayer and gripper
2020-02-20 09:52:20 +09:00
bnsgeyer
a8b1f93a83
AP_Motors: tradheli - fix quad heli collective structure
2020-02-20 09:52:19 +09:00
Andrew Tridgell
7eb106ea07
HAL_ChibiOS: fixed output string for non-DMA capable chan
...
this fixes a problem where the user requests DShot (which rquired DMA)
on an output channel which cannot allocate a DMA channel. We end up
sending normal PWM, so the string representation of the output modes
should reflect that
2020-02-20 09:39:27 +09:00
Randy Mackay
4b684085cc
GCS_MAVLink: send rc output mode banner to GCS
2020-02-20 09:36:53 +09:00
Randy Mackay
95ec629923
AP_HAL: add RCOutput::get_output_mode_banner
2020-02-20 09:36:48 +09:00
Randy Mackay
dfbccf3811
AC_AttitudeControl_Heli: fix VFF and ILMI param descriptions
2020-02-14 12:51:04 +09:00
Randy Mackay
8f32a1089d
AC_PosControl: add missing ACCZ param descriptions
2020-02-14 12:51:01 +09:00
Andrew Tridgell
1201292c09
GCS_MAVLink: raise ftp stack size to 3072 from 1024
...
this prevents memory corruption on directory listing
2020-02-11 12:43:29 +11:00
Andrew Tridgell
77865e9f78
HAL_ChibiOS: fixed spektrum RC input on Pixracer
...
RCININT is inverted compared to RCIN, so need to enable SBUS_INV pin
2020-02-05 11:13:30 +09:00
Andrew Tridgell
8e0124f383
AP_RangeFinder: fixed failover between rangefinders
...
this fixes the case where we have one rangefinder that can handle
short range and another that is good for long range but no good for
short range (quite common, eg radar and lidar)
If possible we want to use the first rangefinder that is in range for
the right orientation. If none are in range then use the first for the
orientation
2020-02-05 11:13:30 +09:00
Henry Wurzburg
f7cbdb4520
HWDEF: Speedybeef4 change I2C internal mask to 0 to allow probing ext baros
2020-02-05 11:13:30 +09:00
Andrew Tridgell
72b9a69911
AP_NavEKF3: don't use WMM tables unless we have a compass scale factor set
2020-02-05 11:13:30 +09:00
Andrew Tridgell
d47126fc6b
AP_NavEKF2: don't use WMM tables unless we have a compass scale factor set
2020-02-05 11:13:30 +09:00
Andy Piper
a1f2c7530e
AP_Logger: fix locking issues, uninitialized read and status message length
...
account for erased partial sectors when looking at wrapped logs
2020-02-04 12:11:07 +09:00
Jaaaky
11062cf7d2
AP_Logger: fix 'last_file' may be used uninitialized with debug build
2020-02-04 12:10:43 +09:00
Andy Piper
7e6fda6650
AP_Logger: mavlink backend needs to be the last backend
...
be really careful to catch aborted erases
take care to protect shared structures in io thread
if flash corruption is detected try and recover whole files
overwrite format in erase to make sure erase happens
output useful messages at critical times
a block is 64k a sector is 4k, rename internal variables appropriately
cope with log wrapping when sending log listings over mavlink
2020-02-04 12:10:17 +09:00
Randy Mackay
06f9c6a210
AP_RangeFinder: fix offset param for PWM driver
2020-02-03 19:38:59 +09:00
Andrew Tridgell
6489623499
HAL_ChibiOS: fixed skyviper-v2450 build
2020-02-02 08:14:20 +11:00