Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
57,489 Commits 71 Branches 509 Tags 743 MiB
Commit Graph

395 Commits

Author SHA1 Message Date
Leonard Hall 7978347044 Copter: Add support for terrain altitude time constant 2023-03-07 13:41:35 +11:00
Peter Barker ade654b251 Copter: use AP_WINCH_ENABLED in place of WINCH_ENABLED 2023-03-03 20:59:06 +11:00
murata 7a7f84adee Copter: Clarify the exclusion determination in the ENUM definition 
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
 2023-02-07 08:20:01 +09:00
Iampete1 13818eac99 ArduCopter: use shared param info defines 2023-01-11 18:41:34 +11:00
Leonard Hall dbe6a1e319 Copter: Payload Place enhancements 2022-12-31 12:29:31 +09:00
Gone4Dirt 66a4ba6256 Copter: add yaw weathevaneing mode 2022-12-14 16:08:20 -05:00
Peter Barker d04f4d8178 Copter: correct defines gating flowhold mode 
We have an explicit define for this mode now
 2022-10-19 21:56:14 +11:00
Peter Barker be93d8212c ArduCopter: add AP_GRIPPER_ENABLED 2022-10-04 10:58:34 +11:00
Iampete1 ee31f2322e Copter: takeoff rpm: define out if no ESC telem 2022-09-07 17:03:03 +01:00
Randy Mackay 3f96423795 Copter: add takeoff RPM check 2022-09-07 17:03:03 +01:00
Leonard Hall 4b20a2d5f1 Copter: Add control over throttle ramp time during take-off 2022-08-31 19:19:04 -04:00
esaldiran cbadf77652 ArduCopter: support custom controller 2022-08-30 13:10:09 +10:00
Iampete1 b988391455 Copter: Fence moved to vehicle 2022-07-27 19:04:56 +10:00
Bill Geyer 1358b7aa06 Copter: delete unused param variable declarations 2022-06-28 07:56:12 +09:00
Bill Geyer 4fde394395 Copter: add support for command model class 2022-06-28 07:56:12 +09:00
Joshua Henderson 13d1b8632b Copter: remove param docs for ACRO_RP_P and _YAW_RP 2022-06-16 09:09:55 +09:00
Randy Mackay b60d6348ed Copter: add dead reckon failsafe 2022-05-25 20:05:21 +09:00
Peter Barker 285d752143 ArduCopter: create and use AP_OPTICALFLOW_ENABLED 
Including a define for each backend.
 2021-12-29 18:12:03 +11:00
Peter Barker 238a6e4016 ArduCopter: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED 2021-11-15 20:27:40 +11:00
Peter Barker ee9aef25fc ArduCopter: ensure ENABLE_SCRIPTING is always defined 2021-11-15 20:27:40 +11:00
Shiv Tyagi e1ded4e3f6 Copter : add SURFTRAK_MODE parameter 
Added a parameter which will be used to set the surface to be tracked in surface tracking.

Co-Authored-By: Peter Hall <33176108+IamPete1@users.noreply.github.com>
 2021-11-13 11:52:38 +09:00
Tatsuya Yamaguchi 918218bdd4 Copter: fix compilation when ACRO, SPORT and DRIFT modes are disabled 2021-10-12 09:01:14 +11:00
Leonard Hall 5d5ccc8c78 Copter: Update ACRO to use rate parameters and update expo function 2021-09-23 20:03:53 +09:00
Randy Mackay 1d7d5d23f7 Copter: add acro and pilot yaw rate and expo 2021-09-23 20:03:53 +09:00
Josh Henderson 24b6f024ea Copter: convert RTL_ALT to int32 2021-09-15 16:17:08 +09:00
Leonard Hall 97decc4c21 Copter: Remove parameter RNGFND_GAIN 2021-09-06 16:00:19 +09:00
Peter Barker 3a3433cad2 ArduCopter: add and use HAL_BUTTON_ENABLE 2021-08-25 19:03:42 +10:00
Randy Mackay d39581f996 Copter: replace use of TERRAIN_MARGIN with WPNAV_TER_MARGIN 2021-07-21 16:03:44 +09:00
Peter Barker 5f039ba06d Copter: fix build for lack of AC_TERRAIN define 2021-07-12 21:14:40 +10:00
Randy Mackay 7dcc5dd7ac Copter: add TERRAIN_MARGIN parameter 2021-07-10 20:25:05 +09:00
Randy Mackay 50d0592962 Copter: add GUID_TIMEOUT for guided mode vel, accel and angle control 2021-07-10 20:25:05 +09:00
Randy Mackay 1cafbe1e65 Copter: add configurable rangefinder filter 2021-06-16 18:54:13 +10:00
Randy Mackay 91fa40aea6 Copter: HAL_PROXIMITY_ENABLED replaces PROXIMITY_ENABLED 2021-03-26 16:22:46 +09:00
Iampete1 2e9c11fbdf Copter: add FLIGHT_OPTIONS param and options bits to disable thrust loss and yaw imbalance warnings 2021-03-02 09:35:06 +09:00
Tatsuya Yamaguchi 621fa857b7 Copter: disable RTL option 2021-01-13 17:19:19 +09:00
Tatsuya Yamaguchi b6b39673d4 Copter: remove PHLD_BRAKE_* params when PosHold is disabled 2021-01-07 11:41:08 +09:00
Tom Pittenger b80f003c98 Copter: extend Stream rates param count to match MAVLINK_COMM_NUM_BUFFER 2020-12-29 07:52:09 -07:00
Pierre Kancir be2e243916 Copter: add initial mode parameter 2020-12-16 17:27:07 +09:00
Peter Barker f4cbc50ba4 Copter: use an enumeration for pre-throw motor state 2020-12-08 12:04:14 +11:00
Peter Barker bd0dff1b0e Copter: use enum-class and AP_Enum for ThrowType 2020-12-08 12:04:14 +11:00
Michael du Breuil f9b4e81702 Copter: Add ignore pilot yaw to guided, auto and RTL options 2020-11-19 07:22:54 +09:00
Michael du Breuil 5e2093b105 Copter: Allow the user to specify the GCS failsafe timeout 2020-11-17 09:24:07 +09:00
Randy Mackay eb3aca7acf Copter: add GUIDED_OPTIONS to allow arming from transmitter 2020-10-20 23:04:45 +09:00
Michael du Breuil 50dfe3f197 Copter: Add AUTO_OPTIONS and support arming and throttle bypass 
This allows you to arm the copter without any extra GCS commands while
in auto, and can be done from both the GCS, or the RC Tx. This is useful
for creating a simpler workflow.

This also allows you to set the auto_armed flag internally, which
bypasses the need to raise the throttle stick for the copter to start a
takeoff.

This exposed a problem where we would start running the controllers
before the EKF was at all initialized, if you switched into auto to
early. This now has a check that prevents us from running the mission
state machine until after the origin has been set. This was a suggestion
from @rmackay9.

When combined these options allow you to have the vehicle on the ground,
disarmed in auto with a takeoff waypoint loaded, then just arm the
aircraft and watch it takeoff. This is a feature we've had on quadplanes
for quite awhile now, and it has proven to be very nice for operators.
 2020-10-01 08:46:29 +09:00
Siddharth Purohit 9b9954aa46 Copter: move to using CANManager library 2020-08-19 17:31:09 +10:00
Randy Mackay 925f76c048 Copter: integrate winch changes 
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
 2020-08-07 21:55:07 +09:00
Andy Piper 12c9578a66 Copter: add in additional acro options 
Air-mode for multicopters
Rate only for multicopters and trad-heli
if air-mode aux switch is toggled in acro do not reset air-mode on exit
 2020-07-14 15:54:24 +09:00
Tatsuya Yamaguchi cde7ae246e Copter: add ZIGZ_AUTO_ENABLE parameter 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi cee7e94ebc Copter: add zigzag_line_num parameter 2020-06-03 15:21:21 +09:00
Tatsuya Yamaguchi 7bc528097d Copter: support zigzag auto feature 2020-06-03 15:21:21 +09:00