this makes the HMC5843 use single-shot mode, which makes it more
robust to bus resets. It also adds WHOAMI checking and enables
automatic temperature compensation.
Unfortunately this makes existing calibration values incompatible, so
a re-cal is required. The device ID has been changed to reflect the
driver change.
The minimum version for gcc was supposed to be 4.9 for any platform.
However our build instructions are outdated. Remove the problematic
parts that use the sparse-endian.h header while we don't fix the setup
for windows.
That rotation is done because of the "arrow" pointing the sensor direction in
3DR GPS+Compass kit (which isn't natural to the sensor orientation, by the
way). Thus, do that rotation only for external HMC5883L compasses.
That rotation is set for AP_COMPASS_TYPE_HMC5883L, because it's usually
the compass from 3DR GPS+Compass kit, which has an arrow pointing the
"correct" direction. That rotation should be done before rotate_field()
as it represents the "standard" position for the kit.
This patch also makes published values consistent with respect to rotation.
Before this, raw fields used in calibration were published with a
rotation different from the filtered field when _product_id is
AP_COMPASS_TYPE_HMC5883L.
And to the detection probe() method. That way we don't need to use a board
`#ifdef` inside the class code. Additionally, we make raspilot board use it.
These are not used. The only place where raw fields are used are in the
compass calibrator and we don't need to store them.
Additionally remove duplicated documentation about the meaning of the
functions to avoid them getting out of sync.
- Capitalize and rename constants
- Make clear what gain is applied in calibration and what is the
"normal" gain
- Make the separation between HMC5883L and HMC5843 explicit when it
makes sense to improve readability
- Remove spurious delay in calibrate function
We still need the BusDriver (in some places called SerialBus) interface
since this driver can also be used on an AuxiliaryBus and that has a
different interface.
Besides the usual conversion some more improvements:
- Use generic function to convert endianness
- Minor cleanups
- Reorder per-board ifdefs in compass instantiation: distinguish when
there's a default compass to when it should probe other compasses
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
This is part of the transition to make all mag field values be used in
milligauss. Additionally the value of _gain_multiple is adapted to the new way
we're using it and corrected accordingly to the datasheets.
The use of _gain_multiple is not necessary because the values of
expected_{x,yz} and _mag_{x,y,z} are both in sensor raw unit (i.e., lsbs).
That wasn't fixed before in order not to make APM users to recalibrate their
compasses.
the previous approach assumed a 1:1 mapping between compass backends
and compass instances, which isn't true on PX4.
It also only setup milligauss offsets on a set_and_save call, which is
not the only way offsets change
this adds a milligauss_ratio per instance, which is considerably
simpler
From now on there's a pair get_field_milligauss() and
get_offsets_milligauss() that can make the transition to the common
units across all compasses easier.
Like was done to inertial AK8963 and inertial sensor move the decision
regarding the I2C bus to the caller. We don't allow changing the address
because apparently HMC5843 doesn't support different addresses.
Changing only the bus could be more easily done but this prepares the
ground for using HMC5843 on an AuxiliarBus.
The need for a more generic abstraction is evidenced by this commit: a
"SerialBus" in AP_HAL would be a nice addition rather than letting each
driver to provide its own. However the methods are a little bit
different from what we have in AK8963. It's safer to do the simple
conversion now and later on to add the abstraction changing everybody to
use it.
Lucas De Marchi
Andrew Tridgell
night-ghost
Michael du Breuil
murata
Lucas De Marchi
Randy Mackay
Mathieu OTHACEHE
Ricardo de Almeida Gonzaga
Gustavo Jose de Sousa
Caio Marcelo de Oliveira Filho
José Roberto de Souza
raspilot
Staroselskii Georgii
Siddharth Bharat Purohit
Jonathan Challinger