ardupilot/libraries/AC_Avoidance/AC_Avoid.h

187 lines
9.3 KiB
C
Raw Normal View History

#pragma once
#include <AP_Common/AP_Common.h>
#include <AP_Param/AP_Param.h>
#include <AP_Math/AP_Math.h>
#include <AC_AttitudeControl/AC_AttitudeControl.h> // Attitude controller library for sqrt controller
#define AC_AVOID_ACCEL_CMSS_MAX 100.0f // maximum acceleration/deceleration in cm/s/s used to avoid hitting fence
// bit masks for enabled fence types.
#define AC_AVOID_DISABLED 0 // avoidance disabled
#define AC_AVOID_STOP_AT_FENCE 1 // stop at fence
#define AC_AVOID_USE_PROXIMITY_SENSOR 2 // stop based on proximity sensor output
#define AC_AVOID_STOP_AT_BEACON_FENCE 4 // stop based on beacon perimeter
#define AC_AVOID_DEFAULT (AC_AVOID_STOP_AT_FENCE | AC_AVOID_USE_PROXIMITY_SENSOR)
// definitions for non-GPS avoidance
#define AC_AVOID_NONGPS_DIST_MAX_DEFAULT 5.0f // objects over 5m away are ignored (default value for DIST_MAX parameter)
#define AC_AVOID_ANGLE_MAX_PERCENT 0.75f // object avoidance max lean angle as a percentage (expressed in 0 ~ 1 range) of total vehicle max lean angle
#define AC_AVOID_ACTIVE_LIMIT_TIMEOUT_MS 500 // if limiting is active if last limit is happend in the last x ms
/*
* This class prevents the vehicle from leaving a polygon fence in
* 2 dimensions by limiting velocity (adjust_velocity).
* Additionally the vehicle may back up if the margin to obstacle is breached
*/
class AC_Avoid {
public:
AC_Avoid();
2017-08-29 20:36:07 -03:00
/* Do not allow copies */
AC_Avoid(const AC_Avoid &other) = delete;
AC_Avoid &operator=(const AC_Avoid&) = delete;
2018-10-25 23:31:20 -03:00
// get singleton instance
static AC_Avoid *get_singleton() {
return _singleton;
}
// return true if any avoidance feature is enabled
bool enabled() const { return _enabled != AC_AVOID_DISABLED; }
/*
* Adjusts the desired velocity so that the vehicle can stop
* before the fence/object.
* Note: Vector3f version is for convenience and only adjusts x and y axis
*/
void adjust_velocity(float kP, float accel_cmss, Vector2f &desired_vel_cms, float dt) {
bool backing_up = false;
adjust_velocity(kP, accel_cmss, desired_vel_cms, backing_up, dt);
}
void adjust_velocity(float kP, float accel_cmss, Vector3f &desired_vel_cms, float dt);
void adjust_velocity(float kP, float accel_cmss, Vector2f &desired_vel_cms, bool &backing_up,float dt);
// adjust desired horizontal speed so that the vehicle stops before the fence or object
// accel (maximum acceleration/deceleration) is in m/s/s
// heading is in radians
// speed is in m/s
// kP should be zero for linear response, non-zero for non-linear response
// dt is the time since the last call in seconds
void adjust_speed(float kP, float accel, float heading, float &speed, float dt);
// adjust vertical climb rate so vehicle does not break the vertical fence
void adjust_velocity_z(float kP, float accel_cmss, float& climb_rate_cms, float dt);
// adjust roll-pitch to push vehicle away from objects
// roll and pitch value are in centi-degrees
// angle_max is the user defined maximum lean angle for the vehicle in centi-degrees
void adjust_roll_pitch(float &roll, float &pitch, float angle_max);
// enable/disable proximity based avoidance
void proximity_avoidance_enable(bool on_off) { _proximity_enabled = on_off; }
bool proximity_avoidance_enabled() { return _proximity_enabled; }
// helper functions
// Limits the component of desired_vel_cms in the direction of the unit vector
// limit_direction to be at most the maximum speed permitted by the limit_distance_cm.
// uses velocity adjustment idea from Randy's second email on this thread:
// https://groups.google.com/forum/#!searchin/drones-discuss/obstacle/drones-discuss/QwUXz__WuqY/qo3G8iTLSJAJ
void limit_velocity(float kP, float accel_cmss, Vector2f &desired_vel_cms, const Vector2f& limit_direction, float limit_distance_cm, float dt);
// compute the speed such that the stopping distance of the vehicle will
// be exactly the input distance.
// kP should be non-zero for Copter which has a non-linear response
float get_max_speed(float kP, float accel_cmss, float distance_cm, float dt) const;
// return margin (in meters) that the vehicle should stay from objects
float get_margin() const { return _margin; }
// return true if limiting is active
bool limits_active() const {return (AP_HAL::millis() - _last_limit_time) < AC_AVOID_ACTIVE_LIMIT_TIMEOUT_MS;};
static const struct AP_Param::GroupInfo var_info[];
private:
2017-12-12 08:19:37 -04:00
// behaviour types (see BEHAVE parameter)
enum BehaviourType {
BEHAVIOR_SLIDE = 0,
BEHAVIOR_STOP = 1
};
/*
* Adjusts the desired velocity for the circular fence.
*/
void adjust_velocity_circle_fence(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
/*
* Adjusts the desired velocity for inclusion and exclusion polygon fences
*/
void adjust_velocity_inclusion_and_exclusion_polygons(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
/*
* Adjusts the desired velocity for the inclusion and exclusion circles
*/
void adjust_velocity_inclusion_circles(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
void adjust_velocity_exclusion_circles(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
/*
* Adjusts the desired velocity for the beacon fence.
*/
void adjust_velocity_beacon_fence(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
/*
* Adjusts the desired velocity based on output from the proximity sensor
*/
void adjust_velocity_proximity(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, float dt);
/*
* Adjusts the desired velocity given an array of boundary points
* earth_frame should be true if boundary is in earth-frame, false for body-frame
* margin is the distance (in meters) that the vehicle should stop short of the polygon
* stay_inside should be true for fences, false for exclusion polygons
*/
void adjust_velocity_polygon(float kP, float accel_cmss, Vector2f &desired_vel_cms, Vector2f &backup_vel, const Vector2f* boundary, uint16_t num_points, bool earth_frame, float margin, float dt, bool stay_inside);
/*
* Computes distance required to stop, given current speed.
*/
float get_stopping_distance(float kP, float accel_cmss, float speed_cms) const;
/*
* Compute the back away velocity required to avoid breaching margin
* INPUT: This method requires the breach in margin distance (back_distance_cm), direction towards the breach (limit_direction)
* It then calculates the desired backup velocity and passes it on to "find_max_quadrant_velocity" method to distribute the velocity vector into respective quadrants
* OUTPUT: The method then outputs four velocities (quad1/2/3/4_back_vel_cms), which correspond to the final desired backup velocity in each quadrant
*/
void calc_backup_velocity(float kP, float accel_cmss, Vector2f &quad1_back_vel_cms, Vector2f &qua2_back_vel_cms, Vector2f &quad3_back_vel_cms, Vector2f &quad4_back_vel_cms, float back_distance_cm, Vector2f limit_direction, float dt);
/*
* Calculate maximum velocity vector that can be formed in each quadrant
* This method takes the desired backup velocity, and four other velocities corresponding to each quadrant
* The desired velocity is then fit into one of the 4 quadrant velocities as per the sign of its components
* This ensures that we have multiple backup velocities, we can get the maximum of all of those velocities in each quadrant
*/
void find_max_quadrant_velocity(Vector2f &desired_vel, Vector2f &quad1_vel, Vector2f &quad2_vel, Vector2f &quad3_vel, Vector2f &quad4_vel);
/*
* methods for avoidance in non-GPS flight modes
*/
// convert distance (in meters) to a lean percentage (in 0~1 range) for use in manual flight modes
float distance_to_lean_pct(float dist_m);
// returns the maximum positive and negative roll and pitch percentages (in -1 ~ +1 range) based on the proximity sensor
void get_proximity_roll_pitch_pct(float &roll_positive, float &roll_negative, float &pitch_positive, float &pitch_negative);
// parameters
AP_Int8 _enabled;
AP_Int16 _angle_max; // maximum lean angle to avoid obstacles (only used in non-GPS flight modes)
AP_Float _dist_max; // distance (in meters) from object at which obstacle avoidance will begin in non-GPS modes
AP_Float _margin; // vehicle will attempt to stay this distance (in meters) from objects while in GPS modes
2017-12-12 08:19:37 -04:00
AP_Int8 _behavior; // avoidance behaviour (slide or stop)
AP_Float _backup_speed_max; // Maximum speed that will be used to back away (in m/s)
bool _proximity_enabled = true; // true if proximity sensor based avoidance is enabled (used to allow pilot to enable/disable)
uint32_t _last_limit_time; // the last time a limit was active
uint32_t _last_log_ms; // the last time simple avoidance was logged
2018-10-25 23:31:20 -03:00
static AC_Avoid *_singleton;
};
namespace AP {
AC_Avoid *ac_avoid();
};