ardupilot/libraries/AP_HAL_ChibiOS/hwdef/fmuv3/hwdef-bl.dat

88 lines
2.1 KiB
Plaintext
Raw Normal View History

# hw definition file for processing by chibios_hwdef.py
# for bootloader for FMUv3 hardware (ie. for Pixhawk1, Pixhawk2 cube, XUAV2.1 etc)
# MCU class and specific type
MCU STM32F4xx STM32F427xx
# board ID for firmware load
APJ_BOARD_ID 9
# crystal frequency
OSCILLATOR_HZ 24000000
# board voltage
STM32_VDD 330U
# ChibiOS system timer
STM32_ST_USE_TIMER 5
# flash size
FLASH_SIZE_KB 2048
# location of application code
define FLASH_BOOTLOADER_LOAD_KB 16
# bootloader loads at start of flash
FLASH_RESERVE_START_KB 0
# USB setup
USB_VENDOR 0x0483 # ST
USB_PRODUCT 0x5740
USB_STRING_MANUFACTURER "ArduPilot"
USB_STRING_SERIAL "%SERIAL%"
# baudrate to run bootloader at on uarts
define BOOTLOADER_BAUDRATE 115200
# uarts and USB to run bootloader protocol on
UART_ORDER OTG1 USART2 USART3 UART7
# this is the pin that senses USB being connected. It is an input pin
# setup as OPENDRAIN
PA9 VBUS INPUT OPENDRAIN
# now we define the pins that USB is connected on
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
# these are the pins for SWD debugging with a STlinkv2 or black-magic probe
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
# Another USART, this one for telem1
PD5 USART2_TX USART2
PD6 USART2_RX USART2
PD3 USART2_CTS USART2
PD4 USART2_RTS USART2
# the telem2 USART, also with RTS/CTS available
# USART3 serial3 telem2
PD8 USART3_TX USART3
PD9 USART3_RX USART3
PD11 USART3_CTS USART3
PD12 USART3_RTS USART3
# UART7 maps to uartF in the HAL (serial5 in SERIALn_ parameters)
PE7 UART7_RX UART7
PE8 UART7_TX UART7
# define a LED
PE12 LED_BOOTLOADER OUTPUT
define HAL_LED_ON 1
# this adds a C define which sets up the ArduPilot architecture
# define. Any line starting with 'define' is copied literally as
# a #define in the hwdef.h header
define HAL_CHIBIOS_ARCH_FMUV3 1
# we need to tell HAL_ChibiOS/Storage.cpp how much storage is
# available (in bytes)
define HAL_STORAGE_SIZE 16384
# uncomment the lines below to enable strict API
# checking in ChibiOS
# define CH_DBG_ENABLE_ASSERTS TRUE
# define CH_DBG_ENABLE_CHECKS TRUE
# define CH_DBG_SYSTEM_STATE_CHECK TRUE
# define CH_DBG_ENABLE_STACK_CHECK TRUE