ardupilot/libraries/AP_Motors/AP_Motors_Class.h

233 lines
11 KiB
C
Raw Normal View History

#pragma once
2012-10-26 20:59:07 -03:00
#include <AP_Common/AP_Common.h>
#include <AP_Math/AP_Math.h> // ArduPilot Mega Vector/Matrix math Library
#include <AP_Notify/AP_Notify.h> // Notify library
2017-01-03 05:56:57 -04:00
#include <SRV_Channel/SRV_Channel.h>
#include <Filter/Filter.h> // filter library
2012-10-26 20:59:07 -03:00
// offsets for motors in motor_out and _motor_filtered arrays
#define AP_MOTORS_MOT_1 0U
#define AP_MOTORS_MOT_2 1U
#define AP_MOTORS_MOT_3 2U
#define AP_MOTORS_MOT_4 3U
#define AP_MOTORS_MOT_5 4U
#define AP_MOTORS_MOT_6 5U
#define AP_MOTORS_MOT_7 6U
#define AP_MOTORS_MOT_8 7U
2017-05-13 22:15:49 -03:00
#define AP_MOTORS_MOT_9 8U
#define AP_MOTORS_MOT_10 9U
#define AP_MOTORS_MOT_11 10U
#define AP_MOTORS_MOT_12 11U
2012-10-26 20:59:07 -03:00
2017-05-13 22:15:49 -03:00
#define AP_MOTORS_MAX_NUM_MOTORS 12
2012-10-26 20:59:07 -03:00
// motor update rate
#define AP_MOTORS_SPEED_DEFAULT 490 // default output rate to the motors
2012-10-26 20:59:07 -03:00
/// @class AP_Motors
class AP_Motors {
public:
enum motor_frame_class {
MOTOR_FRAME_UNDEFINED = 0,
MOTOR_FRAME_QUAD = 1,
MOTOR_FRAME_HEXA = 2,
MOTOR_FRAME_OCTA = 3,
MOTOR_FRAME_OCTAQUAD = 4,
MOTOR_FRAME_Y6 = 5,
MOTOR_FRAME_HELI = 6,
MOTOR_FRAME_TRI = 7,
MOTOR_FRAME_SINGLE = 8,
MOTOR_FRAME_COAX = 9,
MOTOR_FRAME_TAILSITTER = 10,
MOTOR_FRAME_HELI_DUAL = 11,
2017-05-13 22:15:49 -03:00
MOTOR_FRAME_DODECAHEXA = 12,
};
enum motor_frame_type {
MOTOR_FRAME_TYPE_PLUS = 0,
MOTOR_FRAME_TYPE_X = 1,
MOTOR_FRAME_TYPE_V = 2,
MOTOR_FRAME_TYPE_H = 3,
MOTOR_FRAME_TYPE_VTAIL = 4,
MOTOR_FRAME_TYPE_ATAIL = 5,
MOTOR_FRAME_TYPE_Y6B = 10,
MOTOR_FRAME_TYPE_Y6F = 11 // for FireFlyY6
};
2012-10-26 20:59:07 -03:00
// Constructor
AP_Motors(uint16_t loop_rate, uint16_t speed_hz = AP_MOTORS_SPEED_DEFAULT);
2012-10-26 20:59:07 -03:00
// check initialisation succeeded
bool initialised_ok() const { return _flags.initialised_ok; }
2012-10-26 20:59:07 -03:00
// arm, disarm or check status status of motors
2016-07-01 02:35:29 -03:00
bool armed() const { return _flags.armed; }
2013-08-08 10:15:04 -03:00
void armed(bool arm);
2012-10-26 20:59:07 -03:00
// set motor interlock status
void set_interlock(bool set) { _flags.interlock = set;}
2015-05-01 00:16:32 -03:00
// get motor interlock status. true means motors run, false motors don't run
2016-07-01 02:35:29 -03:00
bool get_interlock() const { return _flags.interlock; }
// set_roll, set_pitch, set_yaw, set_throttle
void set_roll(float roll_in) { _roll_in = roll_in; }; // range -1 ~ +1
void set_pitch(float pitch_in) { _pitch_in = pitch_in; }; // range -1 ~ +1
void set_yaw(float yaw_in) { _yaw_in = yaw_in; }; // range -1 ~ +1
void set_throttle(float throttle_in) { _throttle_in = throttle_in; }; // range 0 ~ 1
void set_throttle_avg_max(float throttle_avg_max) { _throttle_avg_max = constrain_float(throttle_avg_max,0.0f,1.0f); }; // range 0 ~ 1
void set_throttle_filter_cutoff(float filt_hz) { _throttle_filter.set_cutoff_frequency(filt_hz); }
void set_forward(float forward_in) { _forward_in = forward_in; }; // range -1 ~ +1
void set_lateral(float lateral_in) { _lateral_in = lateral_in; }; // range -1 ~ +1
// accessors for roll, pitch, yaw and throttle inputs to motors
float get_roll() const { return _roll_in; }
float get_pitch() const { return _pitch_in; }
float get_yaw() const { return _yaw_in; }
float get_throttle() const { return constrain_float(_throttle_filter.get(),0.0f,1.0f); }
float get_throttle_bidirectional() const { return constrain_float(2*(_throttle_filter.get()-0.5f),-1.0f,1.0f); }
float get_forward() const { return _forward_in; }
float get_lateral() const { return _lateral_in; }
virtual float get_throttle_hover() const = 0;
2016-02-02 08:14:12 -04:00
// spool up states
enum spool_up_down_desired {
DESIRED_SHUT_DOWN = 0, // all motors stop
DESIRED_SPIN_WHEN_ARMED = 1, // all motors at spin when armed
DESIRED_THROTTLE_UNLIMITED = 2, // motors are no longer constrained by start up procedure
2016-02-02 08:14:12 -04:00
};
virtual void set_desired_spool_state(enum spool_up_down_desired spool) { _spool_desired = spool; };
enum spool_up_down_desired get_desired_spool_state(void) const { return _spool_desired; }
//
// voltage, current and air pressure compensation or limiting features - multicopters only
//
// set_voltage - set voltage to be used for output scaling
void set_voltage(float volts){ _batt_voltage = volts; }
void set_voltage_resting_estimate(float volts) { _batt_voltage_resting_estimate = volts; }
// set_current - set current to be used for output scaling
void set_current(float current){ _batt_current = current; }
// get and set battery resistance estimate
float get_batt_resistance() const { return _batt_resistance; }
void set_resistance(float resistance){ _batt_resistance = resistance; }
// set_density_ratio - sets air density as a proportion of sea level density
void set_air_density_ratio(float ratio) { _air_density_ratio = ratio; }
// structure for holding motor limit flags
struct AP_Motors_limit {
uint8_t roll_pitch : 1; // we have reached roll or pitch limit
uint8_t yaw : 1; // we have reached yaw limit
uint8_t throttle_lower : 1; // we have reached throttle's lower limit
uint8_t throttle_upper : 1; // we have reached throttle's upper limit
} limit;
//
// virtual functions that should be implemented by child classes
//
2012-10-26 20:59:07 -03:00
// set update rate to motors - a value in hertz
virtual void set_update_rate( uint16_t speed_hz ) { _speed_hz = speed_hz; }
// init
virtual void init(motor_frame_class frame_class, motor_frame_type frame_type) = 0;
// set frame class (i.e. quad, hexa, heli) and type (i.e. x, plus)
virtual void set_frame_class_and_type(motor_frame_class frame_class, motor_frame_type frame_type) = 0;
2012-10-26 20:59:07 -03:00
// enable - starts allowing signals to be sent to motors
virtual void enable() = 0;
// output - sends commands to the motors
virtual void output() = 0;
// output_min - sends minimum values out to the motors
virtual void output_min() = 0;
2013-05-26 23:21:31 -03:00
// output_test - spin a motor at the pwm value specified
// motor_seq is the motor's sequence number from 1 to the number of motors on the frame
// pwm value is an actual pwm value that will be output, normally in the range of 1000 ~ 2000
virtual void output_test(uint8_t motor_seq, int16_t pwm) = 0;
// get_motor_mask - returns a bitmask of which outputs are being used for motors (1 means being used)
// this can be used to ensure other pwm outputs (i.e. for servos) do not conflict
virtual uint16_t get_motor_mask() = 0;
2016-02-03 07:55:55 -04:00
// pilot input in the -1 ~ +1 range for roll, pitch and yaw. 0~1 range for throttle
void set_radio_passthrough(float roll_input, float pitch_input, float throttle_input, float yaw_input);
// set loop rate. Used to support loop rate as a parameter
void set_loop_rate(uint16_t loop_rate) { _loop_rate = loop_rate; }
2016-08-29 02:37:44 -03:00
enum pwm_type { PWM_TYPE_NORMAL=0, PWM_TYPE_ONESHOT=1, PWM_TYPE_ONESHOT125=2, PWM_TYPE_BRUSHED=3 };
2016-08-29 02:37:44 -03:00
pwm_type get_pwm_type(void) const { return (pwm_type)_pwm_type.get(); }
protected:
// output functions that should be overloaded by child classes
virtual void output_armed_stabilizing()=0;
virtual void rc_write(uint8_t chan, uint16_t pwm);
virtual void rc_set_freq(uint32_t mask, uint16_t freq_hz);
virtual void rc_enable_ch(uint8_t chan);
virtual uint32_t rc_map_mask(uint32_t mask) const;
// add a motor to the motor map
void add_motor_num(int8_t motor_num);
// update the throttle input filter
virtual void update_throttle_filter() = 0;
// save parameters as part of disarming
virtual void save_params_on_disarm() {}
// convert input in -1 to +1 range to pwm output
2017-01-03 05:56:57 -04:00
int16_t calc_pwm_output_1to1(float input, const SRV_Channel *servo);
// convert input in 0 to +1 range to pwm output
2017-01-03 05:56:57 -04:00
int16_t calc_pwm_output_0to1(float input, const SRV_Channel *servo);
// flag bitmask
struct AP_Motors_flags {
uint8_t armed : 1; // 0 if disarmed, 1 if armed
2015-05-01 00:16:32 -03:00
uint8_t interlock : 1; // 1 if the motor interlock is enabled (i.e. motors run), 0 if disabled (motors don't run)
uint8_t initialised_ok : 1; // 1 if initialisation was successful
} _flags;
// internal variables
2016-03-22 09:34:14 -03:00
uint16_t _loop_rate; // rate in Hz at which output() function is called (normally 400hz)
uint16_t _speed_hz; // speed in hz to send updates to motors
float _roll_in; // desired roll control from attitude controllers, -1 ~ +1
float _pitch_in; // desired pitch control from attitude controller, -1 ~ +1
float _yaw_in; // desired yaw control from attitude controller, -1 ~ +1
float _throttle_in; // last throttle input from set_throttle caller
float _forward_in; // last forward input from set_forward caller
float _lateral_in; // last lateral input from set_lateral caller
float _throttle_avg_max; // last throttle input from set_throttle_avg_max
LowPassFilterFloat _throttle_filter; // throttle input filter
2016-02-02 08:14:12 -04:00
spool_up_down_desired _spool_desired; // desired spool state
// battery voltage, current and air pressure compensation variables
float _batt_voltage; // latest battery voltage reading
float _batt_voltage_resting_estimate; // estimated battery voltage with sag removed
float _batt_current; // latest battery current reading
float _batt_resistance; // latest battery resistance estimate in ohms
float _air_density_ratio; // air density / sea level density - decreases in altitude
// mapping to output channels
uint8_t _motor_map[AP_MOTORS_MAX_NUM_MOTORS];
uint16_t _motor_map_mask;
uint16_t _motor_fast_mask;
2016-02-03 07:55:55 -04:00
// pass through variables
float _roll_radio_passthrough = 0.0f; // roll input from pilot in -1 ~ +1 range. used for setup and providing servo feedback while landed
float _pitch_radio_passthrough = 0.0f; // pitch input from pilot in -1 ~ +1 range. used for setup and providing servo feedback while landed
float _throttle_radio_passthrough = 0.0f; // throttle/collective input from pilot in 0 ~ 1 range. used for setup and providing servo feedback while landed
float _yaw_radio_passthrough = 0.0f; // yaw input from pilot in -1 ~ +1 range. used for setup and providing servo feedback while landed
AP_Int8 _pwm_type; // PWM output type
2012-10-26 20:59:07 -03:00
};