ardupilot/libraries/AP_Airspeed/AP_Airspeed_Backend.h

116 lines
3.3 KiB
C
Raw Normal View History

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
backend driver class for airspeed
*/
#include <AP_Common/AP_Common.h>
#include <AP_HAL/AP_HAL.h>
#include "AP_Airspeed.h"
class AP_Airspeed_Backend {
public:
AP_Airspeed_Backend(AP_Airspeed &frontend, uint8_t instance);
virtual ~AP_Airspeed_Backend();
// probe and initialise the sensor
virtual bool init(void) = 0;
// return the current differential_pressure in Pascal
virtual bool get_differential_pressure(float &pressure) {return false;}
// return the current temperature in degrees C, if available
virtual bool get_temperature(float &temperature) = 0;
// true if sensor reads airspeed directly, not via pressue
virtual bool has_airspeed() {return false;}
// return airspeed in m/s if available
virtual bool get_airspeed(float& airspeed) {return false;}
2020-11-16 06:35:15 -04:00
#if HAL_MSP_AIRSPEED_ENABLED
virtual void handle_msp(const MSP::msp_airspeed_data_message_t &pkt) {}
#endif
protected:
int8_t get_pin(void) const;
float get_psi_range(void) const;
uint8_t get_bus(void) const;
bool bus_is_confgured(void) const;
uint8_t get_instance(void) const {
return instance;
}
// see if voltage correction should be disabled
bool disable_voltage_correction(void) const {
return (frontend._options.get() & AP_Airspeed::OptionsMask::DISABLE_VOLTAGE_CORRECTION) != 0;
}
AP_Airspeed::pitot_tube_order get_tube_order(void) const {
return AP_Airspeed::pitot_tube_order(frontend.param[instance].tube_order.get());
}
// semaphore for access to shared frontend data
HAL_Semaphore sem;
float get_airspeed_ratio(void) const {
return frontend.get_airspeed_ratio(instance);
}
// some sensors use zero offsets
void set_use_zero_offset(void) {
frontend.state[instance].use_zero_offset = true;
}
// set to no zero cal, which makes sense for some sensors
void set_skip_cal(void) {
frontend.param[instance].skip_cal.set(1);
}
// set zero offset
void set_offset(float ofs) {
frontend.param[instance].offset.set(ofs);
}
// set use
void set_use(int8_t use) {
frontend.param[instance].use.set(use);
}
// set bus ID of this instance, for ARSPD_DEVID parameters
void set_bus_id(uint32_t id) {
frontend.param[instance].bus_id.set(int32_t(id));
}
enum class DevType {
SITL = 0x01,
MS4525 = 0x02,
MS5525 = 0x03,
DLVR = 0x04,
MSP = 0x05,
SDP3X = 0x06,
UAVCAN = 0x07,
ANALOG = 0x08,
NMEA = 0x09,
ASP5033 = 0x0A,
};
private:
AP_Airspeed &frontend;
uint8_t instance;
};