Updated the documentation to use the new name.
Revert addition of the stub entry for the old name.
Georg, I am reverting your changes since this commit should propagate
to py3k.
Modified TestStdlibRenames to support platform specific renames.
Added test for PixMapWrapper rename warning.
Added note to documentation about PixMapWrapper rename.
Adds 'n' as a format specifier for integers, to mirror the same
specifier which is already available for floats. 'n' is the same as
'd', but inserts the current locale-specific thousands grouping.
I added this as a stringlib function, but it's only used by str type,
not unicode. This is because of an implementation detail in
unicode.format(), which does its own str->unicode conversion. But the
unicode version will be needed in 3.0, and it may be needed by other
code eventually in 2.6 (maybe decimal?), so I left it as a stringlib
implementation. As long as the unicode version isn't instantiated,
there's no overhead for this.
Renamed copy_reg to copyreg in the standard library, to avoid
spurious warnings and ease later merging to py3k branch. Public
documentation remains intact.
triggered warnings should be captured. This allows the context manager to be
used to just prevent the internal state of the 'warnings' framework and thus
allow triggered warnings to be displayed.
An assertion in readline() would fail as data was already in the
internal buffer even though the socket was in unbuffered read mode.
That case is now handled. More importantly, read() has been fixed to
not over-recv() and leave newly recv()d data in the _fileobject buffer.
The max() vs min() issue in read() is now gone. Neither was correct.
On bounded reads, always ask recv() for the exact amount of data we
still need.
Candidate for backporting to release25-maint along with r62627.
And of course, the test failed:
a bytearray was used without reason in io.TextIOWrapper.tell().
The difference is that iterating over bytes (i.e. str in python2.6) returns 1-char bytes,
whereas bytearrays yield integers.
This code should still work with python3.0
This is a modified version of a patch proposed by Humberto Diogenes
in the discussion of issue1883.
I will merge manually this change into the py3k branch: the tests must be adapted.
The patch also adds acosh, asinh, atanh, log1p and copysign to all platforms. Finally it fixes differences between platforms like different results or exceptions for edge cases. Have fun :)
'warnings' code in places where it was previously not possible (e.g., the
parser). It could also potentially lead to a speed-up in interpreter start-up
if the C version of the code (_warnings) is imported over the use of the
Python version in key places.
Closes issue #1631171.
This might help fix some of the failures on Windows box(es). It doesn't hurt
either way and ensure the tests are a little more self contained (ie have
less assumptions).
to listen on in network-oriented tests has been refined in an effort to
facilitate running multiple instances of the entire regression test suite
in parallel without issue. test_support.bind_port() has been fixed such
that it will always return a unique port -- which wasn't always the case
with the previous implementation, especially if socket options had been
set that affected address reuse (i.e. SO_REUSEADDR, SO_REUSEPORT). The
new implementation of bind_port() will actually raise an exception if it
is passed an AF_INET/SOCK_STREAM socket with either the SO_REUSEADDR or
SO_REUSEPORT socket option set. Furthermore, if available, bind_port()
will set the SO_EXCLUSIVEADDRUSE option on the socket it's been passed.
This currently only applies to Windows. This option prevents any other
sockets from binding to the host/port we've bound to, thus removing the
possibility of the 'non-deterministic' behaviour, as Microsoft puts it,
that occurs when a second SOCK_STREAM socket binds and accepts to a
host/port that's already been bound by another socket. The optional
preferred port parameter to bind_port() has been removed. Under no
circumstances should tests be hard coding ports!
test_support.find_unused_port() has also been introduced, which will pass
a temporary socket object to bind_port() in order to obtain an unused port.
The temporary socket object is then closed and deleted, and the port is
returned. This method should only be used for obtaining an unused port
in order to pass to an external program (i.e. the -accept [port] argument
to openssl's s_server mode) or as a parameter to a server-oriented class
that doesn't give you direct access to the underlying socket used.
Finally, test_support.HOST has been introduced, which should be used for
the host argument of any relevant socket calls (i.e. bind and connect).
The following tests were updated to following the new conventions:
test_socket, test_smtplib, test_asyncore, test_ssl, test_httplib,
test_poplib, test_ftplib, test_telnetlib, test_socketserver,
test_asynchat and test_socket_ssl.
It is now possible for multiple instances of the regression test suite to
run in parallel without issue.
suite as a side-effect of importing the module.
- in test_capi, a thread tried to import other modules
- re.compile() imported sre_parse again on every call.
close() will now raise an IOError if any operations on the file object
are currently in progress in other threads.
Most code was written by Antoine Pitrou (pitrou). Additional testing,
documentation and test suite cleanup done by me (gregory.p.smith).
Fixes issue 815646 and 595601 (as well as many other bugs and
references to this problem dating back to the dawn of Python).
HandlerBException is ignored, and fix one such problem, where it was thrown
during the __del__ method of the previous Popen object.
We may want to find a better way of printing verbose information so it's not
spammy when the test passes.
calls threading.currentThread.
The correction somewhat improves the code, but it was close.
Many thanks to the "with" construct, which turns python code into C calls.
I wonder if it is not better to sys.settrace(None) just after
running the __main__ module and before finalization.
When cls is an ABCMeta, every call to isinstance(x, cls)
records type(x) in the cls._abc_cache of cls_abc_negative_cache.
So we clear these caches at the end of the test.
inspect.isabstract() is not the correct test for all ABCs, because there is no @abstractmethod in io.py (why?)
isinstance(cls, ABCMeta) would be more exact, but it fails with an infinite recursion.
So I used a hack to determine whether a class is an ABCMeta.
The true correction would be to turn cls._abc_cache &co into a WeakSet, as py3k does.
But classic classes are not weak referenceable...
Of course, this change should not be merged into the py3k branch.
The moved tests use a local server rather than going out to external servers.
Accepts patch from issue2429.
Contributed by Jerry Seutter & Michael Foord (fuzzyman) at PyCon 2008.
reliable, but I'm not convinced it is the right solution. We need
to determine if this causes the test to hang on any platforms or do
other bad things.
Even if it gets the test to pass reliably, it might be that we want
to fix this in socket. The socket returned from accept() is different
on different platforms (inheriting attributes or not) and we might
want to ensure that the attributes (at least blocking) is the same
across all platforms.
up after it was joined had a traceback pointing to that thread's (deleted)
target attribute, while the test was trying to check that the target was
destroyed. Big thanks to Antoine Pitrou for diagnosing the race and pointing
out sys.exc_clear() to kill the exception early. This fixes issue 2496.
svn+ssh://pythondev@svn.python.org/python/branches/trunk-bytearray
........
r61750 | christian.heimes | 2008-03-22 20:47:44 +0100 (Sat, 22 Mar 2008) | 1 line
Copied files from py3k w/o modifications
........
r61752 | christian.heimes | 2008-03-22 20:53:20 +0100 (Sat, 22 Mar 2008) | 7 lines
Take One
* Added initialization code, warnings, flags etc. to the appropriate places
* Added new buffer interface to string type
* Modified tests
* Modified Makefile.pre.in to compile the new files
* Added bytesobject.c to Python.h
........
r61754 | christian.heimes | 2008-03-22 21:22:19 +0100 (Sat, 22 Mar 2008) | 2 lines
Disabled bytearray.extend for now since it causes an infinite recursion
Fixed serveral unit tests
........
r61756 | christian.heimes | 2008-03-22 21:43:38 +0100 (Sat, 22 Mar 2008) | 5 lines
Added PyBytes support to several places:
str + bytearray
ord(bytearray)
bytearray(str, encoding)
........
r61760 | christian.heimes | 2008-03-22 21:56:32 +0100 (Sat, 22 Mar 2008) | 1 line
Fixed more unit tests related to type('') is not unicode
........
r61763 | christian.heimes | 2008-03-22 22:20:28 +0100 (Sat, 22 Mar 2008) | 2 lines
Fixed more unit tests
Fixed bytearray.extend
........
r61768 | christian.heimes | 2008-03-22 22:40:50 +0100 (Sat, 22 Mar 2008) | 1 line
Implemented old buffer interface for bytearray
........
r61772 | christian.heimes | 2008-03-22 23:24:52 +0100 (Sat, 22 Mar 2008) | 1 line
Added backport of the io module
........
r61775 | christian.heimes | 2008-03-23 03:50:49 +0100 (Sun, 23 Mar 2008) | 1 line
Fix str assignement to bytearray. Assignment of a str of size 1 is interpreted as a single byte
........
r61805 | christian.heimes | 2008-03-23 19:33:48 +0100 (Sun, 23 Mar 2008) | 3 lines
Fixed more tests
Fixed bytearray() comparsion with unicode()
Fixed iterator assignment of bytearray
........
r61809 | christian.heimes | 2008-03-23 21:02:21 +0100 (Sun, 23 Mar 2008) | 2 lines
str(bytesarray()) now returns the bytes and not the representation of the bytearray object
Enabled and fixed more unit tests
........
r61812 | christian.heimes | 2008-03-23 21:53:08 +0100 (Sun, 23 Mar 2008) | 3 lines
Clear error PyNumber_AsSsize_t() fails
Use CHARMASK for ob_svall access
disabled a test with memoryview again
........
r61819 | christian.heimes | 2008-03-23 23:05:57 +0100 (Sun, 23 Mar 2008) | 1 line
Untested updates to the PCBuild directory
........
r61917 | christian.heimes | 2008-03-26 00:57:06 +0100 (Wed, 26 Mar 2008) | 1 line
The type system of Python 2.6 has subtle differences to 3.0's. I've removed the Py_TPFLAGS_BASETYPE flags from bytearray for now. bytearray can't be subclasses until the issues with bytearray subclasses are fixed.
........
r61920 | christian.heimes | 2008-03-26 01:44:08 +0100 (Wed, 26 Mar 2008) | 2 lines
Disabled last failing test
I don't understand what the test is testing and how it suppose to work. Ka-Ping, please check it out.
........
r61930 | christian.heimes | 2008-03-26 12:46:18 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytes warning code
........
r61933 | christian.heimes | 2008-03-26 13:20:46 +0100 (Wed, 26 Mar 2008) | 1 line
Fixed a bug in the new buffer protocol. The buffer slots weren't copied into a subclass.
........
r61934 | christian.heimes | 2008-03-26 13:25:09 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytearray subclassing - all tests are passing.
........
an open file. This doesn't seem to be a problem in 2.6, but that appears
to be somewhat accidental (specific to reference counting). When this
gets merged to 3.0, it will make the 3.0 code simpler.
the connect would succeed before the timeout occurred. Try using an
address and port that hopefully doesn't exist to ensure we get no response.
If this doesn't work, we can use a public address close to python.org
and hopefully that address never gets taken.
* disable gc during the test run because we are spawning objects and there
was an exception when calling Popen.__del__
* Always set an alarm handler so the process doesn't exit if the test fails
(should probably add assertions on the value of hndl_called in more places)
* Using a negative time causes Linux to treat it as zero, so disable that test.
timeout (10.0025) is more than 2 seconds more than expected (0.001)
I'm assuming this problem is caused by DNS lookup. This change
does a DNS lookup of the hostname before trying to connect, so the time
is not included.
The patch adds wrappers for the Linux epoll syscalls and the BSD kqueue syscalls. Thanks to Thomas Herve and the Twisted people for their support and help.
TODO: Finish documentation documentation
failures. The test for enumerate-after-join is now a little less rigorous, but
the bug it references says the error happened in the first couple iterations,
so 100 iterations should still be enough.
cProfile was useful for identifying the slow tests here.
least two of the linux build bots aren't leaving zombie processes around for
os.waitpid to wait for, causing ECHILD errors. This would be a symptom of a bug
somewhere, but probably not in signal itself.
argument error on ioctl. This was caused by the added test_fcntl ioctl test
that hard coded 0 as the fd to use. Without a terminal, this fails on solaris.
(it passed from the command line on sol 10, both 32 and 64 bit)
Also, test_ioctl exists so I moved the test into there where it belongs.
when used on platforms that actually define ioctl as taking an unsigned long.
(the BSDs and OS X / Darwin)
Adds a unittest for fcntl.ioctl that tests what happens with both positive and
negative numbers.
This was done because of issue1471 but I'm not able to reproduce -that- problem
in the first place on Linux 32bit or 64bit or OS X 10.4 & 10.5 32bit or 64 bit.
This work is substantially Anthony Baxter's, from issue
1633807. I just freshened it, made a few minor tweaks,
and added the test cases. I also created issue 2412,
which is to check for 2to3's behavior with the print
function. I also added myself to ACKS.
uid and gid input to accept values >=2**31 as valid while still accepting
negative numbers to pass -1 to chown for "no change".
Fixes issue1747858.
This should be backported to release25-maint.
a) no sound card entirely
b) legacy beep driver has been disabled
c) the legacy beep driver has been uninstalled
Sometimes RuntimeErrors are raised, sometimes they're not. If _have_soundcard() returns False, don't expect winsound.Beep() to raise a RuntimeError, as this clearly isn't the case, as demonstrated by the various Win32 XP buildbots.
regardless of the native sizeof(long) used in the integer object.
This somewhat odd behavior of returning a signed is maintained in 2.x for
compatibility reasons of always returning an integer rather than a long object.
Fixes Issue1202 for Python 2.6
Added 0b and 0o literals to tokenizer.
Modified PyOS_strtoul to support 0b and 0o inputs.
Modified PyLong_FromString to support guessing 0b and 0o inputs.
Renamed test_hexoct.py to test_int_literal.py and added binary tests.
Added upper and lower case 0b, 0O, and 0X tests to test_int_literal.py
Added "Z" format_char to PyOS_ascii_formatd to support empty float presentation type.
Renamed buf_size in PyOS_ascii_formatd to more accurately reflect it's meaning.
Modified format.__float__ to use the new "Z" format as the default.
Added test cases.
Unlike Scheme where exactness is implemented as taints, the Python
implementation associated exactness with data types. This created
inheritance issues (making an exact subclass of floats would result
in the subclass having both an explicit Exact registration and an
inherited Inexact registration). This was a problem for the
decimal module which was designed to span both exact and inexact
arithmetic. There was also a question of use cases and no examples
were found where ABCs for exactness could be used to improve code.
One other issue was having separate tags for both the affirmative
and negative cases. This is at odds with the approach taken
elsewhere in the Python (i.e. we don't have an ABC both Hashable
and Unhashable).
across platforms: it should now raise OverflowError on all
platforms. (Previously it raised OverflowError only on
non IEEE 754 platforms.)
Also fix the (already existing) test for this behaviour
so that it actually raises TestFailed instead of just
referencing it.
SocketServers. The core of the patch was written by Pedro Werneck, but any bugs
are mine. I've also rearranged the code for timeouts in order to avoid
interfering with the shutdown poll.
before timing out. This doesn't change the duration of the test under
normal circumstances. This is targetted at fixing the spurious failures
on the FreeBSD buildbot primarily.
would give bogus error messages, because of untested exceptions::
>>> f(**g(1=2))
XXX undetected error
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'int' object is not iterable
instead of the expected SyntaxError: keyword can't be an expression
Will backport.
which forbids constructing types that have it set. The effect is to speed
./python.exe -m timeit -s 'import abc' -s 'class Foo(object): __metaclass__ = abc.ABCMeta' 'Foo()'
up from 2.5us to 0.201us. This fixes issue 1762.
My tests don't show the promised speed up of 10%. The code is as fast as the old code for simple cases and slightly faster for complex cases with several of args and kwargs. But the patch simplifies the code, too.
(This may fail on some slow platforms, but we can fix those cases which
should be relatively isolated and easier to find now.)
Move two test cases that didn't require a server to be started
to a separate TestCase. These tests were taking 3 seconds which
is what the timeout was set to.
run the test simultaneously. The simplest thing I found that worked
on both Windows and Unix was to use the PID. It's unique so should be
sufficient. This should prevent many of the spurious failures of
the automated tests since they run as different users.
Also cleanup the directory consistenly in the tearDown methods.
It would be nice if someone ensured that the directories are always
created with a consistent name.
class RunSelfFunction(object):
def __init__(self):
self.thread = threading.Thread(target=self._run)
self.thread.start()
def _run(self):
pass
from creating a permanent cycle between the object and the thread by having the
Thread delete its references to the object when it completes.
As an example of the effect of this bug, paramiko.Transport inherits from
Thread to avoid it.
Remove automatic handling of datetime.date and datetime.time.
This breaks backward compatibility, but python-dev discussion was strongly
against this automatic conversion; see the bug for a link.
* Fix-up issues pointed-out by Neal Norwitz.
* Add extensive comments.
* The lz->result variable is now a tuple instead of a list.
* Use fast macro getitem/setitem calls so most code is in-line.
* Re-use the result tuple if available (modify in-place instead of copy).
Highlights:
- Adding PyObject_Format.
- Adding string.Format class.
- Adding __format__ for str, unicode, int, long, float, datetime.
- Adding builtin format.
- Adding ''.format and u''.format.
- str/unicode fixups for formatters.
The files in Objects/stringlib that implement PEP 3101 (stringdefs.h,
unicodedefs.h, formatter.h, string_format.h) are identical in trunk
and py3k. Any changes from here on should be made to trunk, and
changes will propogate to py3k).
They still remain fragile.
For example, a call to assertEqual currently does not make any allocation
(which surprised me at first).
But this can change when gc.collect also deletes the numerous "zombie frames"
attached to each function.
./python.exe -m timeit -s 'from fractions import Fraction; f = Fraction(3, 2)' 'isinstance(3, Fraction); isinstance(f, Fraction)'
from 12.3 usec/loop to 3.44 usec/loop and
./python.exe -m timeit -s 'from fractions import Fraction' 'Fraction(3, 2)'
from 48.8 usec to 23.6 usec by avoiding genexps and sets in __instancecheck__
and inlining the common case from __subclasscheck__.
to GET, so it loses its payload. So, it also must lose the
headers related to the payload (if it has no content any more,
it shouldn't indicate content length and type).
* Convert both to unittest.
* Use the same unit testing code.
* Include the expected output in both test files.
* Make it possible to regenerate the expected output by running
the file as a script with an '-r' argument.
The mapping between bytecode offsets and source lines (lnotab) did not contain
an entry for the beginning of the loop.
Now it does, and the lnotab can be a bit larger:
in particular, several statements on the same line generate several entries.
However, this does not bother the settrace function, which will trigger only
one 'line' event.
The lnotab seems to be exactly the same as with python2.4.
I implemented the function sys._compact_freelists() and C API functions PyInt_/PyFloat_CompactFreeList() to compact the pre-allocated blocks of ints and floats. They allow the user to reduce the memory usage of a Python process that deals with lots of numbers.
The patch also renames sys._cleartypecache to sys._clear_type_cache
Georg Brandl
Alexandre Vassalotti
Benjamin Peterson
Brett Cannon
Neal Norwitz
Gregory P. Smith
Amaury Forgeot d'Arc
Eric Smith
Andrew M. Kuchling
Mark Dickinson
Christian Heimes
Martin v. Löwis
Facundo Batista
Armin Rigo
Skip Montanaro
Nick Coghlan
Jerry Seutter
Trent Nelson
Jeffrey Yasskin
Raymond Hettinger
Steven Bethard
David Wolever
Sean Reifscheider
Thomas Heller
Gerhard Häring
Lars Gustäbel
Hye-Shik Chang