OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
ssl.match_hostname() has been simplified and no longer depends on re and
ipaddress module for wildcard and IP addresses. Error reporting for invalid
wildcards has been improved.
Signed-off-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
Add test cases for IDNA 2003 and 2008 host names. IDNA 2003
internationalized host names are working since bpo-31399 has landed. IDNA
2008 deviations are still broken and will be fixed in another patch.
Signed-off-by: Christian Heimes <christian@python.org>
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
Add test certs and test for ECDSA cert and EC/RSA dual mode.
I'm also adding certs for IDNA 2003/2008 tests and simplify some test
data handling.
Signed-off-by: Christian Heimes <christian@python.org>
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
SSLSocket.wrap_bio() and SSLSocket.wrap_socket() hard-code SSLObject and
SSLSocket as return types. In the light of future deprecation of
ssl.wrap_socket() module function and direct instantiation of SSLSocket,
it is desirable to make the return type of SSLSocket.wrap_bio() and
SSLSocket.wrap_socket() customizable.
Signed-off-by: Christian Heimes <christian@python.org>
The SSL module now raises SSLCertVerificationError when OpenSSL fails to
verify the peer's certificate. The exception contains more information about
the error.
Original patch by Chi Hsuan Yen
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-29136: Add TLS 1.3 support
TLS 1.3 introduces a new, distinct set of cipher suites. The TLS 1.3
cipher suites don't overlap with cipher suites from TLS 1.2 and earlier.
Since Python sets its own set of permitted ciphers, TLS 1.3 handshake
will fail as soon as OpenSSL 1.1.1 is released. Let's enable the common
AES-GCM and ChaCha20 suites.
Additionally the flag OP_NO_TLSv1_3 is added. It defaults to 0 (no op) with
OpenSSL prior to 1.1.1. This allows applications to opt-out from TLS 1.3
now.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-27340: Use memoryview in SSLSocket.sendall()
SSLSocket.sendall() now uses memoryview to create slices of data. This fix
support for all bytes-like object. It is also more efficient and avoids
costly copies.
Signed-off-by: Christian Heimes <christian@python.org>
* Cast view to bytes, fix typo
Signed-off-by: Christian Heimes <christian@python.org>
SSLObject.version() now correctly returns None when handshake over BIO has
not been performed yet.
Signed-off-by: Christian Heimes <christian@python.org>
In case PROTOCOL_TLS_SERVER is used for both client context and server
context, the test thread dies with OSError. Catch OSError to avoid
traceback on sys.stderr
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1.0 to 1.1.0e aborted the handshake when server and client
could not agree on a protocol using ALPN. OpenSSL 1.1.0f changed that.
The most recent version now behaves like OpenSSL 1.0.2 again. The ALPN
callback can pretend to not been set.
See https://github.com/openssl/openssl/pull/3158 for more details
Signed-off-by: Christian Heimes <christian@python.org>
AsyncoreEchoServer of test_ssl now calls
asyncore.close_all(ignore_all=True) to ensure that
asyncore.socket_map is cleared once the test completes, even if
ConnectionHandler was not correctly unregistered.
Fix the following warning:
Warning -- asyncore.socket_map was modified by test_ssl
Before: {}
After: {6: <test.test_ssl.AsyncoreEchoServer.EchoServer.ConnectionHandler>}
The deprecation include manual creation of SSLSocket and certfile/keyfile
(or similar) in ftplib, httplib, imaplib, smtplib, poplib and urllib.
ssl.wrap_socket() is not marked as deprecated yet.
The options OP_NO_COMPRESSION, OP_CIPHER_SERVER_PREFERENCE, OP_SINGLE_DH_USE, OP_SINGLE_ECDH_USE, OP_NO_SSLv2 (except for PROTOCOL_SSLv2), and OP_NO_SSLv3 (except for PROTOCOL_SSLv3) are set by default. The initial cipher suite list contains only HIGH ciphers, no NULL ciphers and MD5 ciphers (except for PROTOCOL_SSLv2).
Christian Heimes
Mike
Mandeep Singh
Victor Stinner
Antoine Pitrou
Steve Dower
Nathaniel J. Smith
Serhiy Storchaka
Martin Panter
R David Murray