* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
* Optimize warnings.filterwarnings(). Replace re.compile('') with
None to avoid the cost of calling a regex.match() method, whereas
it always matchs.
* Optimize get_warnings_attr(): replace PyObject_GetAttrString() with
_PyObject_GetAttrId().
Cleanup also create_filter():
* Use _Py_IDENTIFIER() to allow to cleanup strings at Python
finalization
* Replace Py_FatalError() with a regular exceptions
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.
Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.
Add a new 'dev_mode' field to _PyCoreConfig.
When Python is build is debug mode (Py_DEBUG), DeprecationWarning,
PendingDeprecationWarning and ImportWarning warnings are now
displayed by default.
test_venv: run "-m pip" and "-m ensurepip._uninstall" with -W
ignore::DeprecationWarning since pip code is not part of Python.
Get rid of _PyObject_HasAttrId() and PyDict_GetItemString().
Silence only expected AttributeError, KeyError and ImportError when
get an attribute, look up in a dict or import a module.
The concrete PyDict_* API is used to interact with PyInterpreterState.modules in a number of places. This isn't compatible with all dict subclasses, nor with other Mapping implementations. This patch switches the concrete API usage to the corresponding abstract API calls.
We also add a PyImport_GetModule() function (and some other helpers) to reduce a bunch of code duplication.
PR #1638, for bpo-28411, causes problems in some (very) edge cases. Until that gets sorted out, we're reverting the merge. PR #3506, a fix on top of #1638, is also getting reverted.
* group the (stateful) runtime globals into various topical structs
* consolidate the topical structs under a single top-level _PyRuntimeState struct
* add a check-c-globals.py script that helps identify runtime globals
Other globals are excluded (see globals.txt and check-c-globals.py).
* group the (stateful) runtime globals into various topical structs
* consolidate the topical structs under a single top-level _PyRuntimeState struct
* add a check-c-globals.py script that helps identify runtime globals
Other globals are excluded (see globals.txt and check-c-globals.py).
Issue #28915: Replace _PyObject_CallMethodId() with
_PyObject_CallMethodIdObjArgs() in various modules when the format string was
only made of "O" formats, PyObject* arguments.
_PyObject_CallMethodIdObjArgs() avoids the creation of a temporary tuple and
doesn't have to parse a format string.
Replace
_PyObject_CallArg1(func, arg)
with
PyObject_CallFunctionObjArgs(func, arg, NULL)
Using the _PyObject_CallArg1() macro increases the usage of the C stack, which
was unexpected and unwanted. PyObject_CallFunctionObjArgs() doesn't have this
issue.
Issue #28858: The change b9c9691c72c5 introduced a regression. It seems like
_PyObject_CallArg1() uses more stack memory than
PyObject_CallFunctionObjArgs().
Replace
PyObject_CallFunction(func, "O", arg)
and
PyObject_CallFunction(func, "O", arg, NULL)
with
_PyObject_CallArg1(func, arg)
Replace
PyObject_CallFunction(func, NULL)
with
_PyObject_CallNoArg(func)
_PyObject_CallNoArg() and _PyObject_CallArg1() are simpler and don't allocate
memory on the C stack.
* PyObject_CallFunctionObjArgs(func, NULL) => _PyObject_CallNoArg(func)
* PyObject_CallFunctionObjArgs(func, arg, NULL) => _PyObject_CallArg1(func, arg)
PyObject_CallFunctionObjArgs() allocates 40 bytes on the C stack and requires
extra work to "parse" C arguments to build a C array of PyObject*.
_PyObject_CallNoArg() and _PyObject_CallArg1() are simpler and don't allocate
memory on the C stack.
This change is part of the fastcall project. The change on listsort() is
related to the issue #23507.
Issue #26592: _warnings.warn_explicit() now tries to import the warnings module
(Python implementation) if the source parameter is set to be able to log the
traceback where the source was allocated.
Issue #26604:
* Add a new optional source parameter to _warnings.warn() and warnings.warn()
* Modify asyncore, asyncio and _pyio modules to set the source parameter when
logging a ResourceWarning warning
Issue #26567:
* Add a new function PyErr_ResourceWarning() function to pass the destroyed
object
* Add a source attribute to warnings.WarningMessage
* Add warnings._showwarnmsg() which uses tracemalloc to get the traceback where
source object was allocated.
Issue #26568: add new _showwarnmsg() and _formatwarnmsg() functions to the
warnings module.
The C function warn_explicit() now calls warnings._showwarnmsg() with a
warnings.WarningMessage as parameter, instead of calling warnings.showwarning()
with multiple parameters.
_showwarnmsg() calls warnings.showwarning() if warnings.showwarning() was
replaced. Same for _formatwarnmsg(): call warnings.formatwarning() if it was
replaced.
The concept of .pyo files no longer exists. Now .pyc files have an
optional `opt-` tag which specifies if any extra optimizations beyond
the peepholer were applied.
instead of creating temporary Unicode string objects
Add also more identifiers in pythonrun.c to avoid temporary Unicode string
objets for the interactive interpreter.
_Py_DisplaySourceLine()
For example, _PyGC_DumpShutdownStats() calls PyErr_WarnExplicitFormat() while
the import machinery does not work anymore, _Py_DisplaySourceLine() fails when
trying to import the io module.
restricting itself to just functions and methods (which allows
built-in functions to be used, etc.).
Closes issue #10271. Thanks to lekma for the bug report.
'once_registry'. This is bad as the warnings module had variables named
'defaultaction' and 'onceregistry' which are what people should be looking at
(technically those variables shouldn't be mucked with as they are undocumented,
but we all know better than to believe that isn't happening). So the variables
from _warnings have been renamed to come off as private and to avoid confusion
over what variable should be used.
Closes issue #9766. Thanks to Antoine Pitrou for the discovery.
setup_context() replaces .pyc or .pyo filename suffix by .py, but it
didn't work if the filename contains a non-ascii character because the
function used the wrong unit for the length (number of characters
instead of the number of bytes).
With this patch, it uses unicode filenames instead of bytes filenames,
to fix the bug and to be fully unicode compliant.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r77402 | brett.cannon | 2010-01-09 20:56:19 -0600 (Sat, 09 Jan 2010) | 12 lines
DeprecationWarning is now silent by default.
This was originally suggested by Guido, discussed on the stdlib-sig mailing
list, and given the OK by Guido directly to me. What this change essentially
means is that Python has taken a policy of silencing warnings that are only
of interest to developers by default. This should prevent users from seeing
warnings which are triggered by an application being run against a new
interpreter before the app developer has a chance to update their code.
Closes issue #7319. Thanks to Antoine Pitrou, Ezio Melotti, and Brian Curtin
for helping with the issue.
........
r77505 | brett.cannon | 2010-01-14 14:00:28 -0600 (Thu, 14 Jan 2010) | 7 lines
The silencing of DeprecationWarning was not taking -3 into consideration. Since
Py3K warnings are DeprecationWarning by default this was causing -3 to
essentially be a no-op. Now DeprecationWarning is only silenced if -3 is not
used.
Closes issue #7700. Thanks Ezio Melotti and Florent Xicluna for patch help.
........
r77510 | brett.cannon | 2010-01-14 19:31:45 -0600 (Thu, 14 Jan 2010) | 1 line
Remove C++/C99-style comments.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r82059 | victor.stinner | 2010-06-18 01:08:50 +0200 (ven., 18 juin 2010) | 5 lines
Issue #6543: Write the traceback in the terminal encoding instead of utf-8.
Fix the encoding of the modules filename.
Reindent also traceback.h, just because I hate tabs :-)
........
r82061 | victor.stinner | 2010-06-18 01:17:37 +0200 (ven., 18 juin 2010) | 2 lines
Issue #6543: Mention the author of the patch, Amaury Forgeot d'Arc
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r81364 | victor.stinner | 2010-05-19 22:40:50 +0200 (mer., 19 mai 2010) | 3 lines
Issue #8766: Initialize _warnings module before importing the first module.
Fix a crash if an empty directory called "encodings" exists in sys.path.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r72487 | jeffrey.yasskin | 2009-05-08 17:51:06 -0400 (Fri, 08 May 2009) | 7 lines
PyCode_NewEmpty:
Most uses of PyCode_New found by http://www.google.com/codesearch?q=PyCode_New
are trying to build an empty code object, usually to put it in a dummy frame
object. This patch adds a PyCode_NewEmpty wrapper which lets the user specify
just the filename, function name, and first line number, instead of also
requiring lots of code internals.
........
r72488 | jeffrey.yasskin | 2009-05-08 18:23:21 -0400 (Fri, 08 May 2009) | 13 lines
Issue 5954, PyFrame_GetLineNumber:
Most uses of PyCode_Addr2Line
(http://www.google.com/codesearch?q=PyCode_Addr2Line) are just trying to get
the line number of a specified frame, but there's no way to do that directly.
Forcing people to go through the code object makes them know more about the
guts of the interpreter than they should need.
The remaining uses of PyCode_Addr2Line seem to be getting the line from a
traceback (for example,
http://www.google.com/codesearch/p?hl=en#u_9_nDrchrw/pygame-1.7.1release/src/base.c&q=PyCode_Addr2Line),
which is replaced by the tb_lineno field. So we may be able to deprecate
PyCode_Addr2Line entirely for external use.
........
r72879 | jeffrey.yasskin | 2009-05-23 19:23:01 -0400 (Sat, 23 May 2009) | 14 lines
Issue #6042:
lnotab-based tracing is very complicated and isn't documented very well. There
were at least 3 comment blocks purporting to document co_lnotab, and none did a
very good job. This patch unifies them into Objects/lnotab_notes.txt which
tries to completely capture the current state of affairs.
I also discovered that we've attached 2 layers of patches to the basic tracing
scheme. The first layer avoids jumping to instructions that don't start a line,
to avoid problems in if statements and while loops. The second layer
discovered that jumps backward do need to trace at instructions that don't
start a line, so it added extra lnotab entries for 'while' and 'for' loops, and
added a special case for backward jumps within the same line. I replaced these
patches by just treating forward and backward jumps differently.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r70965 | brett.cannon | 2009-04-01 11:03:59 -0700 (Wed, 01 Apr 2009) | 5 lines
_warnings was importing itself to get an attribute. That's bad if warnings gets
called in a thread that was spawned by an import itself.
Last part to close#1665206.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r66748 | christian.heimes | 2008-10-02 21:47:50 +0200 (Thu, 02 Oct 2008) | 1 line
Fixed a couple more C99 comments and one occurence of inline.
........
+ another // comment in bytesobject
passed in as the message to use for a warning. Fixed along with making the code
more robust against other errors where return values were not checked.
Closes issue 3639.
Code review by Benjamin Peterson.
PyUnicode_AsStringAndSize -> _PyUnicode_AsStringAndSize to mark
them for interpreter internal use only.
We'll have to rework these APIs or create new ones for the
purpose of accessing the UTF-8 representation of Unicode objects
for 3.1.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r64722 | georg.brandl | 2008-07-05 12:13:36 +0200 (Sat, 05 Jul 2008) | 4 lines
#2663: support an *ignore* argument to shutil.copytree(). Patch by Tarek Ziade.
This is a new feature, but Barry authorized adding it in the beta period.
........
r64729 | mark.dickinson | 2008-07-05 13:33:52 +0200 (Sat, 05 Jul 2008) | 5 lines
Issue 3188: accept float('infinity') as well as float('inf'). This
makes the float constructor behave in the same way as specified
by various other language standards, including C99, IEEE 754r,
and the IBM Decimal standard.
........
r64753 | gregory.p.smith | 2008-07-06 05:35:58 +0200 (Sun, 06 Jul 2008) | 4 lines
- Issue #2862: Make int and float freelist management consistent with other
freelists. Changes their CompactFreeList apis into ClearFreeList apis and
calls them via gc.collect().
........
r64845 | raymond.hettinger | 2008-07-10 16:03:19 +0200 (Thu, 10 Jul 2008) | 1 line
Issue 3301: Bisect functions behaved badly when lo was negative.
........
r64846 | raymond.hettinger | 2008-07-10 16:34:57 +0200 (Thu, 10 Jul 2008) | 1 line
Issue 3285: Fractions from_float() and from_decimal() accept Integral arguments.
........
r64849 | andrew.kuchling | 2008-07-10 16:43:31 +0200 (Thu, 10 Jul 2008) | 1 line
Wording changes
........
r64871 | raymond.hettinger | 2008-07-11 14:00:21 +0200 (Fri, 11 Jul 2008) | 1 line
Add cautionary note on the use of PySequence_Fast_ITEMS.
........
r64880 | amaury.forgeotdarc | 2008-07-11 23:28:25 +0200 (Fri, 11 Jul 2008) | 5 lines
#3317 in zipfile module, restore the previous names of global variables:
some applications relied on them.
Also remove duplicated lines.
........
r64881 | amaury.forgeotdarc | 2008-07-11 23:45:06 +0200 (Fri, 11 Jul 2008) | 3 lines
#3342: In tracebacks, printed source lines were not indented since r62555.
#3343: Py_DisplaySourceLine should be a private function. Rename it to _Py_DisplaySourceLine.
........
r64882 | josiah.carlson | 2008-07-12 00:17:14 +0200 (Sat, 12 Jul 2008) | 2 lines
Fix for the AttributeError in test_asynchat.
........
r64885 | josiah.carlson | 2008-07-12 01:26:59 +0200 (Sat, 12 Jul 2008) | 2 lines
Fixed test for asyncore.
........
r64888 | matthias.klose | 2008-07-12 09:51:48 +0200 (Sat, 12 Jul 2008) | 2 lines
- Fix bashisms in Tools/faqwiz/move-faqwiz.sh
........
r64897 | benjamin.peterson | 2008-07-12 22:16:19 +0200 (Sat, 12 Jul 2008) | 1 line
fix various doc typos #3320
........
r64900 | alexandre.vassalotti | 2008-07-13 00:06:53 +0200 (Sun, 13 Jul 2008) | 2 lines
Fixed typo.
........
r64901 | benjamin.peterson | 2008-07-13 01:41:19 +0200 (Sun, 13 Jul 2008) | 1 line
#1778443 robotparser fixes from Aristotelis Mikropoulos
........
r64915 | nick.coghlan | 2008-07-13 16:52:36 +0200 (Sun, 13 Jul 2008) | 1 line
Fix issue 3221 by emitting a RuntimeWarning instead of raising SystemError when the parent module can't be found during an absolute import (likely due to non-PEP 361 aware code which sets a module level __package__ attribute)
........
r64926 | martin.v.loewis | 2008-07-13 22:31:49 +0200 (Sun, 13 Jul 2008) | 2 lines
Add turtle into the module index.
........
r64927 | alexandre.vassalotti | 2008-07-13 22:42:44 +0200 (Sun, 13 Jul 2008) | 3 lines
Issue #3274: Use a less common identifier for the temporary variable
in Py_CLEAR().
........
r64928 | andrew.kuchling | 2008-07-13 23:43:25 +0200 (Sun, 13 Jul 2008) | 1 line
Re-word
........
r64929 | andrew.kuchling | 2008-07-13 23:43:52 +0200 (Sun, 13 Jul 2008) | 1 line
Add various items; move ctypes items into a subsection of their own
........
r64938 | andrew.kuchling | 2008-07-14 02:35:32 +0200 (Mon, 14 Jul 2008) | 1 line
Typo fixes
........
r64939 | andrew.kuchling | 2008-07-14 02:40:55 +0200 (Mon, 14 Jul 2008) | 1 line
Typo fix
........
r64940 | andrew.kuchling | 2008-07-14 03:18:16 +0200 (Mon, 14 Jul 2008) | 1 line
Typo fix
........
r64941 | andrew.kuchling | 2008-07-14 03:18:31 +0200 (Mon, 14 Jul 2008) | 1 line
Expand the multiprocessing section
........
r64944 | gregory.p.smith | 2008-07-14 08:06:48 +0200 (Mon, 14 Jul 2008) | 7 lines
Fix posix.fork1() / os.fork1() to only call PyOS_AfterFork() in the child
process rather than both parent and child.
Does anyone actually use fork1()? It appears to be a Solaris thing
but if Python is built with pthreads on Solaris, fork1() and fork()
should be the same.
........
r64961 | jesse.noller | 2008-07-15 15:47:33 +0200 (Tue, 15 Jul 2008) | 1 line
multiprocessing/connection.py patch to remove fqdn oddness for issue 3270
........
r64966 | nick.coghlan | 2008-07-15 17:40:22 +0200 (Tue, 15 Jul 2008) | 1 line
Add missing NEWS entry for r64962
........
r64973 | jesse.noller | 2008-07-15 20:29:18 +0200 (Tue, 15 Jul 2008) | 1 line
Revert 3270 patch: self._address is in pretty widespread use, need to revisit
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r64549 | brett.cannon | 2008-06-26 17:31:13 -0700 (Thu, 26 Jun 2008) | 7 lines
warnings.warn_explicit() did not have the proper TypeErrors in place to prevent
bus errors or SystemError being raised. As a side effect of fixing this, a bad
DECREF that could be triggered when 'message' and 'category' were both None was
fixed.
Closes issue 3211. Thanks JP Calderone for the bug report.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r63208 | georg.brandl | 2008-05-13 15:04:54 -0400 (Tue, 13 May 2008) | 2 lines
#2831: add start argument to enumerate(). Patch by Scott Dial and me.
........
r63209 | marc-andre.lemburg | 2008-05-13 15:10:45 -0400 (Tue, 13 May 2008) | 3 lines
Remove leftovers from reverted setuptools checkin (they were added in r45525).
........
r63211 | georg.brandl | 2008-05-13 17:32:03 -0400 (Tue, 13 May 2008) | 2 lines
Fix a refleak in the _warnings module.
........
r63212 | andrew.kuchling | 2008-05-13 20:46:41 -0400 (Tue, 13 May 2008) | 1 line
List all the removes and renamed modules
........
r63214 | brett.cannon | 2008-05-13 21:09:40 -0400 (Tue, 13 May 2008) | 2 lines
Rewrap some lines in test_py3kwarn.
........
r63219 | georg.brandl | 2008-05-14 02:34:15 -0400 (Wed, 14 May 2008) | 2 lines
Add NEWS entry for #2831.
........
r63220 | neal.norwitz | 2008-05-14 02:47:56 -0400 (Wed, 14 May 2008) | 3 lines
Fix "refleak" by restoring the tearDown method removed by accident (AFAICT)
in r62788.
........
r63221 | georg.brandl | 2008-05-14 03:18:22 -0400 (Wed, 14 May 2008) | 2 lines
Fix another "refleak" by clearing the filters after test.
........
r63222 | neal.norwitz | 2008-05-14 03:21:42 -0400 (Wed, 14 May 2008) | 5 lines
Install the json package and tests as well as the lib2to3 tests
so the tests work when run from an install directory.
They are currently skipped on the daily runs (not from the buildbots)
for checking refleaks, etc.
........
r63256 | andrew.kuchling | 2008-05-14 21:10:24 -0400 (Wed, 14 May 2008) | 1 line
Note some removals and a rename
........
r63311 | brett.cannon | 2008-05-15 00:36:53 -0400 (Thu, 15 May 2008) | 2 lines
Add a snippet for the deprecation directive for docs.
........
r63313 | gregory.p.smith | 2008-05-15 00:56:18 -0400 (Thu, 15 May 2008) | 5 lines
disable the crashing test. I will also file a bug. This crash does
not appear to be a new bug, its just that the test coverage went up
recently exposing it. (I verified that by testing this test code on
an older Modules/_bsddb.c)
........
r63320 | georg.brandl | 2008-05-15 11:08:32 -0400 (Thu, 15 May 2008) | 2 lines
#2863: add gen.__name__ and add this name to generator repr().
........
r63324 | andrew.kuchling | 2008-05-15 16:07:39 -0400 (Thu, 15 May 2008) | 1 line
Import class from distutils.cmd, not .core, to avoid circular import
........
r63327 | alexandre.vassalotti | 2008-05-15 16:31:42 -0400 (Thu, 15 May 2008) | 2 lines
Fixed typo in a doctest of test_genexps.
........
r63332 | benjamin.peterson | 2008-05-15 18:34:33 -0400 (Thu, 15 May 2008) | 2 lines
add Mac modules to the list of deprecated ones
........
r63333 | benjamin.peterson | 2008-05-15 18:41:16 -0400 (Thu, 15 May 2008) | 2 lines
fix typos in whatsnew
........
r63348 | benjamin.peterson | 2008-05-15 22:24:49 -0400 (Thu, 15 May 2008) | 2 lines
make test_platform a bit more assertive (We'll see what the buildbots say.)
........
Victor Stinner
Serhiy Storchaka
luzpaz
Oren Milman
Eric Snow
Larry Hastings
Benjamin Peterson
Brett Cannon
Antoine Pitrou
Berker Peksag
Florent Xicluna
Victor Stinner
Martin v. Löwis
Ezio Melotti
Georg Brandl
Brett Cannon
Alexandre Vassalotti
Hirokazu Yamamoto
Christian Heimes
Marc-André Lemburg