bd3a527f93
Two patches by Jason Harper:
...
- Faster conversion to string for binary bases: linear instead of quadratic!
- Allocate smaller result for certain masking ops, e.g. (1L<<30000) & 1.
1998-08-11 15:04:47 +00:00
1a8791e0b8
Changes for BeOS, QNX and long long, by Chris Herborth.
1998-08-04 22:46:29 +00:00
ac6a37ae55
Fix a potential problem in PyLong_FromString(): could fall through the
...
for loop with z==NULL but continue to reference z later.
1998-08-04 15:04:06 +00:00
df3d8756b7
Better error messages when raising ValueError for int and long
...
literals. (The previous version of this code would not show the
offending input, even though there was code that attempted this.)
1998-08-04 15:02:01 +00:00
152d8173a3
Fix a memory leak -- the cached values of __getattr__ etc. were never
...
freed.
1998-08-04 14:59:16 +00:00
52ddc0e756
PyFile_FromString(): If an exception occurs, pass in the filename that
...
was used so it's reflected in the IOError. Call
PyErr_SetFromErrnoWithFilename().
1998-07-23 16:07:02 +00:00
b4db1944c4
When comparing objects, always check that tp_compare is not NULL
...
before calling it. This check was there when the objects were of the
same type *before* coercion, but not if they initially differed but
became the same *after* coercion.
1998-07-21 21:56:41 +00:00
0fd00334c6
Avoid using calloc(). This triggered an obscure bug on multiprocessor
...
Sparc Solaris 2.6 (fully patched!) that I don't want to dig into, but
which I suspect is a bug in the multithreaded malloc library that only
shows up when run on a multiprocessor. (The program wasn't using
threads, it was just using the multithreaded C library.)
1998-07-16 15:06:13 +00:00
5dba9e8aef
Add special case to PySequence_List() so that list() of a list is
...
faster (using PyList_GetSlice()). Also added a test for a NULL
argument, as with PySequence_Tuple(). (Hmm... Better names for these
two would be PyList_FromSequence() and PyTuple_FromSequence(). Oh well.)
1998-07-10 18:03:50 +00:00
bfc725bf64
Changed PySequence_List() and PySequence_Tuple() to support
...
"indefinite length" sequences. These should still have a length, but
the length is only used as a hint -- the actual length of the sequence
is determined by the item that raises IndexError, which may be either
smaller or larger than what len() returns. (This is a novelty; map(),
filter() and reduce() only allow the actual length to be larger than
what len() returns, not shorter. I'll fix that shortly.)
1998-07-10 16:22:44 +00:00
d4ba73c75b
Move the definition of PyMethodObject to classobject.h, so it can define
...
macros for more efficient access to the fields.
1998-07-10 15:46:33 +00:00
9223351617
Marc-Andre Lemburg's patch to move the typedef for PyCFunctionObject
...
to the .h file and add macros there for inlined access to the fields.
1998-07-10 15:21:55 +00:00
7859f87fdb
Marc-Andre Lemburg's patch to support instance methods with other
...
callable objects than regular Pythonm functions as their im_func.
1998-07-08 14:58:16 +00:00
7ba30431ec
Recompute the special getattr/setattr/delattr cache slots after
...
changing __dict__ *or* __bases__.
1998-07-08 13:34:48 +00:00
3dd7f3fef0
Added doc strings for methods and a new pop() method.
1998-06-30 15:36:32 +00:00
8a92c627d9
New feature: if the object's type has a non-NULL tp_doc field, that
...
is returned as the object's __doc__ attribute.
(If only the list of methods would be referenced from the type...)
1998-06-27 18:28:59 +00:00
1bb26872f5
Slight rearrangement of some code to make it faster, by Vladimir
...
Marangozov.
1998-06-26 15:53:50 +00:00
e67629774f
Add check in long-to-int conversion for at least one digit.
1998-06-22 03:54:46 +00:00
3b2b34790f
Fix the tests for various anomalies in the string-to-numbers
...
conversions. Formerly, for example, int('-') would return 0 instead
of raising ValueError, and int(' 0') would raise ValueError
(complaining about a null byte!) instead of 0...
1998-06-22 03:54:15 +00:00
4281258b5f
Minor cleanup by Tim after my changes:
...
+ Took the "list" argument out of the other functions that no longer need
it. This speeds things up a little more.
+ Small comment changes in accord with that.
+ Exploited the now-safe ability to cache values in the partitioning loop.
Makes no timing difference on my flavor of Pentium, but this machine ran out
of registers 12 iterations ago. It should yield a small speedup on a RISC
machine, and not hurt in any case.
1998-06-17 14:15:44 +00:00
4c4e7df755
Tim's latest, with some of my changes (also a TP suggestion) added:
...
instead of testing whether the list changed size after each
comparison, temporarily set the type of the list to an immutable list
type. This should allow continued use of the list for legitimate
purposes but disallows all operations that can change it in any way.
(Changes to the internals of list items are not caught, of cause;
that's not possible to detect, and it's not necessary to protect the
sort code, either.)
1998-06-16 15:18:28 +00:00
e0fdf6f1a8
Keep Microsoft's compiler happy.
1998-06-12 15:03:58 +00:00
cd5a5f627a
When comparing objects of different types (which is done by comparing
...
the type names), make sure that numeric objects are considered smaller
than all other objects, by forcing their name to "".
1998-06-09 18:58:44 +00:00
4a0144c0de
Should check that PyObject_Str() really returned a string!
1998-06-09 15:08:41 +00:00
a63eff6e6a
Allow assignments to special class attributes -- with typechecks, and
...
not in restricted mode.
__dict__ can be set to any dictionary; the cl_getattr, cl_setattr and
cl_delattr slots are refreshed.
__name__ can be set to any string.
__bases__ can be set to to a tuple of classes, provided they are not
subclasses of the class whose attribute is being assigned.
__getattr__, __setattr__ and __delattr__ can be set to anything, or
deleted; the appropriate slot (cl_getattr, cl_setattr, cl_delattr) is
refreshed.
(Note: __name__ really doesn't need to be a special attribute, but
that would be more work.)
1998-05-29 21:37:21 +00:00
a119c0dd5e
Tim's revision of the previous patch. He also added some sparts to
...
the median-of-three code to get a few percent back.
1998-05-29 17:56:32 +00:00
ed6219b116
Fix a whole bunch of error return NULL that should be return -1.
1998-05-29 02:59:33 +00:00
ae621ff7b7
Guard against changes in the list size during a compare or sort.
1998-05-28 20:18:46 +00:00
617c1b0116
Uses PyErr_ExceptionMatches() instead of comparing PyErr_Occurred().
1998-05-28 19:50:02 +00:00
08570decb7
Uses PyErr_ExceptionMatches() instead of comparing PyErr_Occurred().
1998-05-28 19:24:35 +00:00
9be628338d
Tim's quicksort on May 25.
1998-05-26 15:06:32 +00:00
f753181272
Subject: Buglet in PyLong_AsLong
...
From: "Tim Peters" <tim_one@email.msn.com>
To: "Guido van Rossum" <guido@CNRI.Reston.VA.US>
Date: Sat, 23 May 1998 21:45:53 -0400
Guido, the overflow checking in PyLong_AsLong is off a little:
1) If the C in use sign-extends right shifts on signed longs, there's a
spurious overflow error when converting the most-negative int:
Python 1.5.1 (#0 , Apr 13 1998, 20:22:04) [MSC 32 bit (Intel)] on win32
Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam
>>> x = -1L << 31
>>> x
-2147483648L
>>> int(x)
Traceback (innermost last):
File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>>
2) If C does not sign-extend, some genuine overflows won't be caught.
The attached should repair both, and, because I installed a new disk and a C
compiler today, it's even been compiled this time <wink>.
Python 1.5.1 (#0 , May 23 1998, 20:24:58) [MSC 32 bit (Intel)] on win32
Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam
>>> x = -1L << 31
>>> x
-2147483648L
>>> int(x)
-2147483648
>>> int(-x)
Traceback (innermost last):
File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>> int(-x-1)
2147483647
>>> int(x-1)
Traceback (innermost last):
File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>>
end-casing-ly y'rs - tim
1998-05-26 14:33:37 +00:00
fa0b6ab01a
Address some gcc -Wall warnings (e.g. include <ctype.h>).
...
Make sure that no tp_as_numbers->nb_<whatever> function is called
without checking for a NULL pointer. Marc-Andre Lemburg will love it!
(Except that he's just rewritten all this code for a different
approach to coercions ;-( )
1998-05-22 15:23:36 +00:00
0dabacee16
Make function objects somewhat mutable -- the members func_code,
...
func_defaults and func_doc (alias __doc__) may be assigned to. For
the first two, there's a type restriction to code object and tuple,
respectively.
1998-05-22 00:55:34 +00:00
1c4f458099
In PyObject_IsTrue(), don't call function pointers that are NULL
...
(nb_nonzero, mp_length, sq_length).
1998-05-22 00:53:24 +00:00
cea1c8ca22
Completely reformatted, standardizing indentation as well as
...
programming style.
Recoded many routines to incorporate better error checking, and/or
better versions of the same function found elsewhere
(e.g. bltinmodule.c or ceval.c). In particular,
Py_Number_{Int,Long,Float}() now convert from strings, just like the
built-in functions int(), long() and float().
Sequences and mappings are now safe to have NULL function pointers
anywhere in their tp_as_sequence or tp_as_mapping fields. (A few
places in other files need to be checked in too.)
Renamed PySequence_In() to PySequence_Contains().
1998-05-22 00:47:05 +00:00
e23eb57f08
Since PyDict_GetItem() can't raise an exception any more, there's no
...
need to cxall PyErr_Clear() when it returns NULL.
1998-05-14 01:49:48 +00:00
474b19e2ab
Make sure that PyDict_GetItem[String]() *never* raises an exception.
...
If the argument is not a dictionary, simply return NULL. If the
hash() on the key fails, clear the error.
1998-05-14 01:00:51 +00:00
4180cf1649
Remove a redundant statement from halfbinop().
1998-05-13 22:02:16 +00:00
ed7adcff73
Tim's quicksort on May 13.
1998-05-13 21:21:24 +00:00
b7057640d1
Tim's quicksort on May 10.
1998-05-13 21:20:49 +00:00
8530ef625a
Add check to conjugate() that there are no excess arguments.
1998-05-07 16:29:10 +00:00
91aaa92c88
Ugly band-aid to work around a bug in Linux ftell().
1998-05-05 22:21:35 +00:00
e32907df67
Get rid of the unused ifdefed-out old sort code.
1998-04-28 17:54:03 +00:00
9b00dfae75
If USE_STACKCHECK is defined use PyOS_CheckStack() in the repr and str
...
routines. This catches a slightly different set of crashes than the
recursive-repr fix.
(Jack)
1998-04-28 16:06:54 +00:00
f2044e1a71
Enable ftruncate() on the Mac.
...
(Jack)
1998-04-28 16:05:59 +00:00
82e6a8f80d
Quicksort retuned by Tim Peters.
1998-04-28 13:17:56 +00:00
d30dc0a55e
Clear the error condition set by ftell().
1998-04-27 19:01:08 +00:00
565798d493
Be less naive about null characters in an object's repr().
1998-04-21 22:25:01 +00:00
eb90946978
Some robustness checks in Py_ReprLeave() in the unlikely event someone
...
has messed with the dictionary or list.
1998-04-11 15:17:34 +00:00
fb376dee55
Use Py_Repr{Enter,Leave} to display recursive lists in finite space.
...
(Jeremy will hardly recognize his patch :-)
1998-04-10 22:47:27 +00:00
255443b720
Use Py_Repr{Enter,Leave} to display recursive dictionaries in finite space.
...
(Jeremy will hardly recognize his patch :-)
1998-04-10 22:47:14 +00:00
8661036cb8
Add implementations of Py_Repr{Enter,Leave}.
...
(Jeremy will hardly recognize his patch :-)
1998-04-10 22:32:46 +00:00
1109fbca76
Make new gcc -Wall happy
1998-04-10 22:16:39 +00:00
c3d3f9692d
Add PyObject_Not().
1998-04-09 17:53:59 +00:00
f7d590c93d
This was the reason a numeric array to a real power was not working.
1998-04-03 23:38:59 +00:00
240c35aac0
Subtle fix in the read() code which could cause a read broken up in
...
several pieces to fail...
1998-03-18 17:59:20 +00:00
f8b4de02a4
When we have no setvbuf(), make the file totally unbuffered using
...
setbuf() if a buffer size of 0 or 1 byte is requested.
1998-03-06 15:32:40 +00:00
dcb5e7f389
Of course, I shouldn't have used lseek() to find out the file's
...
position in new_buffersize(); the correct function to use is ftell().
Thanks to Ben Jackson.
1998-03-03 22:36:10 +00:00
044b9dc1d7
Add back some safeguards on the index elements that were lost in the
...
last patch. Dave Ascher found a case that dumps core without these:
def myComparison(x,y):
return cmp(x%3,y%7)
z = range(12)
z.sort(myComparison)
1998-02-25 17:50:03 +00:00
f1dc0615e9
Add internal routine _PyModule_Clear(), which does approximately what
...
clear_carefully() used to do in import.c. Differences: leave only
__builtins__ alone in the 2nd pass; and don't clear the dictionary (on
the theory that as long as there are references left to the
dictionary, those might be destructors that might expect __builtins__
to be alive when they run; and __builtins__ can't normally be part of
a cycle).
1998-02-19 20:51:52 +00:00
bde6ff7984
Vladimir Marangozov' performance hack: copy f_builtins from ancestor
...
if the globals are the same.
Also, when creating a dummy builtins dictionary, add "None" to it,
just to be kind.
1998-02-19 20:48:26 +00:00
3da3fcef96
Check ferror(), not errno, for fread() error.
1998-02-19 20:46:48 +00:00
db9351643d
Instead of "attribute-less object", issue an error message that
...
contains the type of the object and name of the attribute.
1998-01-19 22:16:36 +00:00
24e62e2c7c
Modified quicksort by Raymund Galvin, after studying the GNU libg++
...
quicksort. This should be much faster if there are lots of
duplicates, and otherwise at least as good.
1997-12-10 15:14:24 +00:00
b7f1afe4a8
Change the default repr() and str() of class instance objects to look
...
like <modulename.classname instance at ...> (to match the repr() of
class objects.
1997-12-03 00:06:02 +00:00
242c64256c
Add a new function PyNumber_CoerceEx() which works just like
...
PyNumber_Coerce() except that when the coercion can't be done and no
other exceptions happen, it returns 1 instead of raising an
exception.
Use this function in PyObject_Compare() to avoid raising an exception
simply because two objects with numeric behavior can't be coerced to a
common type; instead, proceed with the non-numeric default comparison.
Note that this is a somewhat questionable practice -- comparisons for
numeric objects shouldn't default to random behavior like this, but it
is required for backward compatibility. (Case in point, it broke
comparison of kjDict objects to integers in Aaron Watters' kjbuckets
extension.) A correct fix (for python 2.0) should involve a different
definiton of comparison altogether.
1997-11-19 16:03:17 +00:00
3931df9250
Undo another glitch of the automatic not-so-Grand Renaming; some local
...
variables called 'coerce' were accidentally renamed to
'PyNumber_Coerce'. Rename them back to coercefunc.
1997-11-18 19:23:07 +00:00
f51815426e
Fix problem discovered by Barry: if you hit ^C to
...
sys.stdin.readline(), you get a fatal error (no current thread). This
is because there was a call to PyErr_CheckSignals() while there was no
current thread. I wonder how many more of these we find... I bnetter
go hunting for PyErr_CheckSignals() now...
1997-11-07 19:20:34 +00:00
6345ac6d61
Add cast to realloc/malloc call to shut up AIX compiler. (Vladimir Marangozov)
1997-10-31 20:32:13 +00:00
3c03fa87b6
Hack suggested by Matthias Klose to pull in all relevant entry points
...
in libmath.a so they are available to mathmodule.so (in case it is
shared). While this still gets triggered on Solaris 2.x, this appears
to be harmless there.
1997-10-31 17:00:30 +00:00
1f84449fd8
New CObject from Jim Fulton, adds PyCObject_FromVoidPtrAndDesc() and
...
PyCObject_GetDesc().
1997-10-21 19:48:35 +00:00
4a2a621907
Write a str() function for class objects that returns
...
"modulename.classname" instead of returning the same as repr().
1997-10-20 23:26:11 +00:00
6fcfa72c63
Correct Barry's fix -- take care of {}.get(0).
1997-10-20 20:10:00 +00:00
320ac331d1
dict_get(): Fixed a couple of stupid mistakes which caused crashes.
...
Also got rid of some unnecessary code.
1997-10-20 17:26:25 +00:00
04d73c495e
Check that all base classes are indeed class objects, rather than
...
expecting the caller to do so.
1997-10-07 14:54:11 +00:00
c38c5da5d0
dict_get(): New method for item access with different semantics than
...
__getitem__(). This method never raises an exception; if the key is
not in the dictionary, the second (optional) argument is returned. If
the second argument is not provided and the key is missing, None is
returned.
mapp_methods: added "get" method.
1997-10-06 17:49:20 +00:00
4f3bf1e383
Don't intern the key string for getitem and delitem.
1997-09-29 23:31:11 +00:00
7cc56eb524
When creating a class, set its __module__ attribute to the module
...
whose name is in the current globals' __name__ variable. If __name__
is not set, ignore this.
1997-09-12 20:04:46 +00:00
045e688f6f
Patch submitted by Brad Howes (with one bug fixed by me): allow
...
arbitrary nested parens in a %(...)X style format.
#Also folded two lines and added more detail to the error message for
#unsupported format character.
1997-09-08 18:30:11 +00:00
b2173c3146
Allow assignments to instance.__dict__ and instance.__class__. The
...
former lets you give an instance a set of new instance vars. The
latter lets you give it a new class. Both are typechecked and
disallowed in restricted mode.
For classes, the check for read-only special attributes is tightened
so that only assignments to __dict__, __bases__, __name__,
__getattr__, __setattr__, and __delattr__ (these could be made to work
as well, but I don't know if that's useful -- let's see first whether
mucking with instances will help).
1997-08-25 21:23:56 +00:00
a27d112213
Rename roundup() to roundupsize(), as there's a macro roundup() in the
...
sys/types.h header on many systems that may get pulled in (through
WANT_SIGFPE_HANDLER which pulls in signal.h).
1997-08-25 18:36:23 +00:00
36f8e2d1db
Use lseek instead of ftell; compensate by adding BUFSIZE
1997-08-21 02:31:25 +00:00
fd7a0b871f
Made lookdict nearly twice as fast, resulting in a 5% overall
...
improvement of pystone. Vladimir Marangozov.
1997-08-18 21:52:47 +00:00
787bdd37a0
PyTuple_SetItem should require that the tuple's refcnt is one!
1997-08-17 16:25:45 +00:00
ea46e4d93c
Fix mixup about PyErr_NoMemory() prototype.
1997-08-12 14:54:54 +00:00
83f9ad8399
Fix bug in comparing function objects detected by Sjoerd:
...
SystemError: bad argument to internal function
caused by comparing NULL pointer default args.
1997-08-05 16:51:05 +00:00
fbbd57e4ca
Added _Fini() routines to free up some memory
1997-08-05 02:16:08 +00:00
971a7aaeac
Change the Fini function to only remove otherwise unreferenced strings
...
from the interned table. There are references in hard-to-find static
variables all over the interpreter, and it's not worth trying to get
rid of all those; but "uninterning" isn't fair either and may cause
subtle failures later -- so we have to keep them in the interned
table.
Also get rid of no-longer-needed insert of None in interned dict.
1997-08-05 02:15:12 +00:00
1f39c5c666
Added separate free list for cfunction (builtin method) objects, for a
...
few percent speed up. Also add PyCFunction_Fini() to discard it.
1997-08-05 02:11:41 +00:00
404b95d9ba
Provide a dummy empty directory as f_builtins instead of failing, when
...
no valid directory is passed in. This prevents __del__ to fail when
invoked after __builtins__ has already been discarded.
Also add PyFrame_Fini() to discard the cache of frames.
1997-08-05 02:09:46 +00:00
a0d349f46a
Added separate free list for instance method objects, for a few
...
percent speed up. Also add PyMethod_Fini() to discard it.
1997-08-05 02:06:53 +00:00
e09fb55f29
Added _Py_ResetReferences(), if tracing references.
...
In _Py_PrintReferences(), no longer suppress once-referenced string.
Add Py_Malloc and friends and PyMem_Malloc and friends (malloc
wrappers for third parties).
1997-08-05 02:04:34 +00:00
eb46d67ce5
Avoid function calls to access the current thread state and builtins
...
-- the thread state is passed in as an argument and the builtins are a
member thereof.
1997-08-02 02:59:08 +00:00
8cf0476474
Added internal routine PyString_Fini() which deletes all interned
...
strings. For use in Py_Finalize() only.
1997-08-02 02:57:45 +00:00
f6ca6aa869
New build procedure.
1997-07-19 19:39:57 +00:00
5d8123f34a
Reordered list of methods to hopefully put the most frequently used
...
ones near the front.
1997-07-13 03:58:01 +00:00
74ba24758e
Reordered list of methods to hopefully put the most frequently used
...
ones near the front.
Also added a missing "return -1" to PyFile_WriteString.
1997-07-13 03:56:50 +00:00
71160aaffe
Use #include "mymath.h" instead of declaring fabs() explicitly.
...
This should solve a weird problem on the Mac for Jack.
1997-06-03 18:03:18 +00:00
a8d5131d57
Renamed dict.absorb() (too spungy) to dict.update().
1997-06-02 17:13:37 +00:00
80c2a1674e
American spelling in doc string.
1997-06-02 14:43:07 +00:00
e3f5b9c8d1
Added dict.absorb() and dict.copy().
1997-05-28 19:15:28 +00:00
c8b6df9004
PyObject_Compare can raise an exception now.
1997-05-23 00:06:51 +00:00
5b2121b25f
PyObject_Compare can now return an error. Unfortunately, there are a
...
few places where we don't know how to test for them without losing
speed; don't know yet how to handle that.
1997-05-23 00:01:41 +00:00
27a60b147c
PyFile_WriteString now returns an error indicator instead of calling
...
PyErr_Clear().
1997-05-22 22:25:11 +00:00
e9eec54798
Fix typo in error checking spotted by Just...
1997-05-22 14:02:25 +00:00
a9040ec5d9
Renamed a local variable from 'PyCFunction' (which is also a typedef
...
in methodobject.h) to 'func'. /bin/cc on SunOS 4.x didn't grok this.
1997-05-20 22:09:08 +00:00
037b2205e8
Moved PyObject_{Get,Set}Attr to object.c.
...
Fixed two 'return NULL' that should be 'return -1'.
1997-05-20 18:35:19 +00:00
98ff96adba
Moved PyObject_{Get,Set}Attr here (from dictobject) and add PyObject_HasAttr.
1997-05-20 18:34:44 +00:00
967839473a
Got rid of c_error in favor of errno (and EDOM/ERANGE).
...
Assume that errno usage is thread-safe -- most vendors do this by
making in a macro that refers to a per-thread storage area.
1997-05-20 18:21:34 +00:00
3cca24570e
Got rid of all the last_name_* bogosities. I don't think the
...
complexity saved much any more. A simple benchmark (grail) showed
that there were 3 times as many misses as hits, and the same number of
times again the code was bypassed altogether due to the existence of
setattro/getattro.
1997-05-16 14:23:33 +00:00
d0c87ee6c4
Oops, another forgotten renaming: varobject -> PyVarObject.
1997-05-15 21:31:03 +00:00
e61093c218
Fix reversed test for failure in PySequence_List() and PySequence_Tuple().
...
This broke cPickle.
1997-05-14 18:43:29 +00:00
9637432265
Renamed mappingobject.c to dictobject.c.
1997-05-13 21:05:38 +00:00
a9e7a81137
Renamed from mappingobject.c to dictobject.c.
...
(Sorry Jack, all your projects will have to be changed again. :-( )
1997-05-13 21:02:11 +00:00
93ad0df06c
Faster floating point allocator, same idea as the int allocator.
...
By Aaron Watters.
1997-05-13 21:00:42 +00:00
789a1613a0
Add optional 'sizehint' argument to readlines(). After approximately
...
this many bytes have been read, readlines stops. Because of
buffering, the amount of bytes read is usually at least 8K more than
the hint.
Also changed read() and readline() to use PyArg_ParseTuple().
(Note that the *previous* checkin also fixed error handling and
narrowed the range of thread unblocking for all methods using
fread().)
1997-05-10 22:33:55 +00:00
6263d5451c
Rewrite readlines() to speed it up -- about a factor of 2 on my
...
Indigo2, reading a 9Meg file from the local disk.
1997-05-10 22:07:25 +00:00
5449b6e123
Speed up read() (i.e. read till EOF) considerably by doing a stat() to
...
see if we can guess the #bytes until the end of the file. If we
can't, increment the buffer size increments up to 0.5Meg to avoid
realloc'ing too much.
1997-05-09 22:27:31 +00:00
0add15f6a5
removed last #ifdef SUPPORT_OBSOLETE_ACCESS bits.
1997-05-09 01:07:15 +00:00
b819914263
Fix by Mark Hammond to enable truncate() on Windows.
1997-05-06 15:23:24 +00:00
fdf95dd525
Checkin of Jack's buffer mods.
...
Not really checked, but didn't fail any tests either...
1997-05-05 22:15:02 +00:00
a027efa5bf
Massive changes for separate thread state management.
...
All per-thread globals are moved into a struct which is manipulated
separately.
1997-05-05 20:56:21 +00:00
c0b618a2cc
Quickly renamed the last directory.
1997-05-02 03:12:38 +00:00
1875247549
Quickly renamed.
1997-04-29 14:49:28 +00:00
3648884490
(Jack:) Align mapping entries to 4-words if USE_CACHE_ALIGNED is defined.
1997-04-11 19:14:07 +00:00
2095d24842
Tweaks to keep the Microsoft compiler quiet.
1997-04-09 19:41:24 +00:00
8017767420
Remove unused variable.
1997-04-09 18:22:28 +00:00
6191551ad6
Remove a redundant XINCREF(value). This caused the reference count of
...
all locals to be upped by one when `from <module> import <whatever>'
was executed.
1997-04-03 18:31:43 +00:00
4669fb474b
Several fixes reported by jim F.
1997-04-02 05:31:09 +00:00
c054d70aee
Get rid of .conj pseudo data attribute for complex numbers.
...
Add __members__ attribute.
1997-04-01 03:12:33 +00:00
fb8f1cadb2
Add clear() method to dictionary objects.
1997-03-21 21:55:12 +00:00
f2e499b1d7
New long_lshift, without restriction on size of shift count, by Tim Peters.
...
This makes it possible to write 1L<<1000000, memory permitting.
1997-03-16 00:37:59 +00:00
45b83915f8
New form of PyFPE_END_PROTECT macro.
1997-03-14 04:32:50 +00:00
19700b6a98
Add casts to CMPERROR macro to silence SunPro compiler warnings about
...
integer overflow in << operator.
1997-03-05 00:45:43 +00:00
09e6ad0c1e
Changes for Lee Busby's SIGFPE patch set.
...
Surround various f.p. operations with PyFPE_{START,END}_PROTECT macros.
1997-02-14 22:54:21 +00:00
0f4bbd2f34
Keep gcc -Wall happy.
1997-02-14 21:12:56 +00:00
36b9f7908a
Slight tweak: in string_hash(), if the hash hasn't been computed yet,
...
and if there's a pointer to an interned version of the string, use its
hash and store its hash in this object, rather than recomputing it.
1997-02-14 16:29:22 +00:00
7582bfb60a
Kill all local variables when the frame is deallocated (moved here
...
from ceval.c).
Wrapped a long line.
1997-02-14 16:27:29 +00:00
efb4609c4a
Small lookmapping nits:
...
- remove bogus initialization using uninitialized i
- derive initial incr from hash
- copy mp->ma_table into a local variable
1997-01-29 15:53:56 +00:00
4acdc2327f
Fix bug reported by Per Lindqvist: "%#06x" % 1 stuck the 0 padding
...
in front of the 0x, like such: "0000x1".
1997-01-29 06:00:24 +00:00
9e5656ca3f
Final three poly table entries corrected by Tim Peters.
...
Reindented the whole table.
1997-01-29 04:45:16 +00:00
16e93a8d59
Changed the lookup algorithm again, based on Reimer Behrends's post.
...
The table size is now constrained to be a power of two, and we use a
variable increment based on GF(2^n)-{0} (not that I have the faintest
idea what that is :-) which helps avoid the expensive '%' operation.
Some of the entries in the table of polynomials have been modified
according to a post by Tim Peters.
1997-01-28 00:00:11 +00:00
747596a491
When a recycled frame has more local+stack slots than needed,
...
give the extra slots to the stack rather than than forgetting about
them (this reduces the number of reallocs done).
1997-01-24 04:00:21 +00:00
ca756f2a1d
Forget keeping track of whether a dictionary contains all interned
...
string keys. Just doing a pointer compare before the string compare
(in fact before the hash compare!) is just as fast.
1997-01-23 19:39:29 +00:00
e0e696282f
Added PyCObject_Import.
1997-01-22 20:48:48 +00:00
a04d47b319
Don't use static buffers internally for formatstring().
1997-01-21 16:12:09 +00:00
3bb63a8dbe
Bugfix: remove ref to fast before it's defined.
1997-01-20 04:29:16 +00:00
f3e85a0356
Changes that appear to give another 12% speedup.
...
Rather than allocating a list object for the fast locals and another
(extensible one) for the value stack and allocating the block stack
dynamically, allocate the block stack with a fixed size (CO_MAXBLOCKS
from compile.h), and stick the locals and value stack at the end of
the object (this is now possible since the stack size is known
beforehand). Get rid of the owner field and the nvalues argument --
it is available in the code object, like nlocals.
This requires small changes in ceval.c only.
1997-01-20 04:20:52 +00:00
a412d24be0
Intern the various string objects created to speed up lookups.
1997-01-18 07:59:12 +00:00
b56933ed2e
Intern the strings "__builtins__".
1997-01-18 07:58:41 +00:00
c6d0670f1b
Intern the strings created in getattr() and setattr().
1997-01-18 07:57:16 +00:00
2a61e7428d
String interning.
1997-01-18 07:55:05 +00:00
792fd435ec
Comment out extend_stack() -- it is no longer needed.
1997-01-17 21:07:57 +00:00
7d18159614
Rewrote lookmapping() according to suggestions by Jyrki Alakuijala.
1997-01-16 21:06:45 +00:00
6f72f97c03
Increased buffer sizes used by hex() and oct() -- on 64-bit or 128-bit
...
machines, the string may get longer than 20 characters!
1997-01-14 15:43:41 +00:00
ebee0256f3
Changed hex() and oct() again, to never emit a '-' sign.
1997-01-12 19:48:03 +00:00
919cf1aff1
New, better hash for floating point and complex
1997-01-11 19:26:21 +00:00
80dd9b6672
Subtle change to hex/oct formatting so the largest negative number
...
does not receive a minus sign.
1997-01-10 17:39:30 +00:00
541cdd84ac
Fix overflow test for multiply to catch some cases it missed.
...
Added warning about dependency of float/complex hash on int hash.
1997-01-06 22:53:20 +00:00
53756b1097
Added PyLong_FromUnsignedLong() and PyLong_AsUnsignedLong().
1997-01-03 17:14:46 +00:00
babab6869f
Removed all traces of accessobject.c.
1996-12-25 19:22:49 +00:00
f90eddef5d
PySequence_Index(): set exception when object is not found in
...
sequence, otherwise
operator.indexOf([4, 3, 2, 1], 9) would raise a SystemError!
Note: it might be wise to double check all these functions. I haven't
done that yet.
1996-12-18 19:32:18 +00:00
0969ad213d
Better tuple hash function.
1996-12-16 17:55:46 +00:00
cc15b42e59
Change comment about MINSIZE -- 10 is optimal for Python.
1996-12-16 03:32:39 +00:00
3176bb1df2
Some more tuning of quicksort: use pointers instead of indexing.
1996-12-11 23:57:39 +00:00
3f236dee3a
Added new quicksort implementation, tailored to sorting arrays of
...
object pointers. Should be a bit faster than the C library's qsort(),
and doesn't have the prohibition on recursion that Solaris qsort() has
in the threaded version of their C library.
Thanks to discussions with Tim Peters.
1996-12-10 23:55:39 +00:00
067998f35e
Add const to error and newstring functions
1996-12-10 15:33:34 +00:00
9478dd40c2
Fix core dump from pow(x,y,0).
...
Make gcc -Wall happy.
1996-12-06 20:14:43 +00:00
da9c2710c7
Make gcc -Wall happy
1996-12-05 21:58:58 +00:00
472c04f18f
Fix newlongobject so it will work for 64-bit as well as 32-bit hardware
...
(although for 32-bit hardware it's a bit slower than it was).
Make gcc -Wall happy.
1996-12-05 21:57:21 +00:00
a0a69b8b42
Experimental new implementation of dictionary comparison. This
...
defines that a shorter dictionary is always smaller than a longer one.
For dictionaries of the same size, the smallest differing element
determines the outcome (which yields the same results as before,
without explicit sorting).
1996-12-05 21:55:55 +00:00
685a38ea94
Make gcc -Wall happy.
1996-12-05 21:54:17 +00:00
04f95d5238
Better implementation of PyCObject_AsVoidPtr().
1996-12-05 21:53:15 +00:00
cbd1e4eb5f
Yet more elaborate message for exception in __del__.
...
Make gcc -Wall happy.
1996-12-05 21:52:32 +00:00
3c5936afc5
Added missing PySequence_List.
...
Correct typo in error msg (expec[t]ed).
Make gcc -Wall happy.
1996-12-05 21:51:24 +00:00
052b7e1cfb
Make Py_ReturnNullError() statis as it should be.
1996-11-11 15:08:19 +00:00
08ef9d98b2
Only call sq_length in Sequence_GetItem for negative index.
1996-11-09 22:32:05 +00:00
8dbcdd0a4c
correct typo in return variable for PySequence_Index()
1996-11-06 15:31:46 +00:00
d266eb460e
New permission notice, includes CNRI.
1996-10-25 14:44:06 +00:00
fde7a75b78
Fixed compare function to do first char comparison in unsigned mode,
...
for consistency with the way other characters are compared.
1996-10-23 14:19:40 +00:00
8bcf369cf9
Support passing in an empty dictionary of keywords to newinstanceobject.
1996-10-21 15:12:32 +00:00
e449af7da9
Ellipses -> Ellipsis rename (the dictionary really says that it should
...
be Ellipsis!).
Bumped the API version because a linker-visible symbol is affected.
Old C code will still compile -- there's a b/w compat macro.
Similarly, old Python code will still run, builtin exports both
Ellipses and Ellipsis.
1996-10-11 16:25:41 +00:00
336c699236
Fix subtle bug detected by Jim F.
1996-09-30 22:00:50 +00:00
24048580ca
Oops... Need to clear c_error before calling c_quot().
1996-09-12 21:02:02 +00:00
3be12e97cd
Properly(?) implemented remainder and divmod (Tim Hochberg)
1996-09-12 20:56:18 +00:00
d4ab3cde8e
Raise exception instead of dropping imag part for conversion to int,
...
long, float.
Raise exception instead of dumping core for remainder and divmod.
1996-09-11 22:54:37 +00:00
22a85e5308
More detailed error message about exception in __del__
1996-09-11 22:51:57 +00:00
b7fc304109
Correct typo in setattr: return -1 for error, not NULL
1996-09-11 22:51:25 +00:00
eddcb3bae1
Multiply by 1000003 instead of 3 in string hach
1996-09-11 20:22:48 +00:00
b23a60fd6e
Get rid of bogus MSC_VER undef of CHECK()
1996-09-11 20:21:41 +00:00
ee09fc1c30
Don't dump core on complex % or divmod -- raise a TypeError exception.
1996-09-11 13:55:55 +00:00
e5920bc4c6
Use getstringsize where available instead of strlen.
1996-08-26 14:58:03 +00:00
ad8997887b
Be a bit more careful with printing a warning for a failed __del__.
1996-08-22 23:15:42 +00:00
6cdc6f4146
Added PyObject_DelItem and PySequence_Del{Item,Slice}.
1996-08-21 17:41:54 +00:00
019f424a0a
More efficient handling of "__doc__" lookup.
1996-08-21 14:54:28 +00:00
89227eb0f5
Write warning about exception in __del__ to stderr, not stdout.
1996-08-20 19:54:29 +00:00
926518b683
Changes to make the file acceptable to K&R C compilers (HPUX, SunOS 4.x).
1996-08-19 19:30:45 +00:00
c13bcca268
Test for negative # to the nonintegral float power here.
...
Expanded powi() in-line.
1996-08-16 20:42:57 +00:00
0dfcf753ad
Disable support for access statement
1996-08-12 22:00:53 +00:00
aacdc9da75
Define reference count admin debug functions to return void.
1996-08-12 21:32:12 +00:00
2878a69922
Optimizations by Sjoerd:
...
- define tp_getattro, tp_setattro
- use precreated string objects for most common exceptions and method names
1996-08-09 20:53:24 +00:00
d8eb1b340f
Support for tp_getattro, tp_setattro (Sjoerd)
1996-08-09 20:52:03 +00:00
929f1b83ea
Use pre-created string objects for most common exceptions
...
(especially IndexError which is caught by 'for')
1996-08-09 20:51:27 +00:00
86c04c252b
Correct wrong calculation of pow(0.0, 0.0, negative_number)
1996-08-09 20:50:14 +00:00
cee555bda2
Allow compilation by K&R C compiler.
1996-08-01 00:02:33 +00:00
fd4904c630
repr("...") -> "Ellipses"
1996-07-30 18:37:14 +00:00
f2d125bdad
Added sliceobject.c
1996-07-30 16:45:48 +00:00
310968dc06
Speedup suggested by Sjoerd
1996-07-30 16:45:31 +00:00
6c02a2fe25
Use NEWOBJ() macro instead of calling newobject() directly.
1996-07-22 16:16:25 +00:00
9e720e390a
complex -> Py_complex
1996-07-21 02:31:35 +00:00
f5030abca8
Hacks for MS_COREDLL
1996-07-21 02:30:39 +00:00
3cb486879a
Only __dict__ and __class__ are read-only instance attributes
1996-07-21 02:29:46 +00:00
9d81b5594e
Different logic for defining CHECK(); 16-bit MSC specific define.
1996-06-26 18:27:19 +00:00
ded690fc35
rename printrefs, getobjects to _Py_ prefix
1996-05-24 20:48:31 +00:00
363078afa4
make some things static
1996-05-24 20:45:01 +00:00
441e4ab802
new debugger symbol names
1996-05-23 22:46:51 +00:00
84a9032cd3
TRACE_REFS -> Py_TRACE_REFS.
...
Added disgusting hack to force loading of abstract.o.
1996-05-22 16:34:47 +00:00
f97632639e
Plug memory leak in the previous fix :-(
1996-05-21 23:44:17 +00:00
993952bfb2
Fix obscure bug in string%mapping where the mapping creates its items
...
on the fly -- there was an unsafe DECREF. Actually save some lines of
code by using abstract.c:PyObject_GetItem().
1996-05-21 22:44:20 +00:00
6dabc98400
Added __name__ attribute to class instance method objects.
...
Removed im_doc attribute; __name__ and __doc__ are now handled by
special casing in instancemethodgetattr(). This saves a few bytes and
INCREF/DECREF calls per i.m. object allocation/deallocation.
1996-05-14 21:54:20 +00:00
724187929a
use 'j' instead of 'i' for imaginary constants
1996-01-25 16:21:31 +00:00
1e7b2aa5d6
Removed unused var
1996-01-25 16:11:19 +00:00
d8b49250e9
added complex and c objects
1996-01-12 01:26:05 +00:00
97ead3fb8e
Hack to force loading of cobject.o
1996-01-12 01:24:09 +00:00
39739ea0ed
better power implementation
1996-01-12 01:22:56 +00:00
cf3d1087d1
Added PyComplex_AsCComplex
1996-01-12 01:21:14 +00:00
f9fca9252f
complex numbers a la Konrad Hinsen
1996-01-12 00:47:05 +00:00
77654a7e5e
opaque C object a la Jim Fulton
1996-01-12 00:44:03 +00:00
992ded8f12
fix free memory reads in dictlookup et al
1995-12-08 01:16:31 +00:00
8ba873b8ad
adapted to K&R C
1995-09-18 21:17:59 +00:00
6f011d7ad5
Get ordering right for TRACE_REFS/COUNT_ALLOCS combination (otherwise
...
may get inc_count sanity check abort).
1995-09-18 10:49:04 +00:00
6ec3c653da
Implemented two new functions in sys:
...
getcounts() returns a list of counts of allocations and
deallocations for all different object types.
getobjects(n [, type ]) returns a list of recently allocated
and not-yet-freed objects of the given type (all
objects if no type given). Only the n most recent
(all if n==0) objects are returned.
getcounts is only available if compiled with -DCOUNT_ALLOCS,
getobjects is only available if compiled with -DTRACE_REFS. Note that
everything must be compiled with these options!
1995-08-29 09:18:14 +00:00
740f357363
Fixed calling of __del__ method with TRACE_REFS defined.
1995-08-28 09:00:43 +00:00
ac21f6a579
class objects are read-only in restricted mode
1995-08-04 04:05:31 +00:00
055968c068
better err checks in resizetuple
1995-08-04 04:05:10 +00:00
a83f270a4b
changes for keyword args to built-in functions and classes
1995-07-26 18:07:32 +00:00
bdd207af79
better policy regarding NULL locals
1995-07-26 16:14:30 +00:00
2271bf7187
changes for keyword arguments and fast function call; added abstract.c
1995-07-18 14:30:34 +00:00
e15dee5e3c
Generic Abstract Object Interface
1995-07-18 14:12:02 +00:00
1311e3ce73
args to call_object must be tuple or NULL
1995-07-12 02:22:06 +00:00
d3f9a1ad83
fix read(0), readline(0); make tuple for call_object args
1995-07-10 23:32:26 +00:00
e08dea19c2
MW does not always set errno on failing fopen()
1995-04-23 22:12:47 +00:00
e9df727176
change comparing instance methods
1995-04-06 14:46:51 +00:00
d8953cb8d9
change in counting freed objects
1995-04-06 14:46:26 +00:00
5b7f3cd3e1
Use mappinglookup instead of dictlookup for looking up __builtin__.
1995-04-04 11:47:41 +00:00
6f9e433ab3
fix dusty debugging macros
1995-03-29 16:57:48 +00:00
5fe605889a
a few peephole optimizations
1995-03-09 12:12:50 +00:00
687ec1892b
changes for MPW
1995-03-04 22:43:47 +00:00
07e3a7e781
for MPW __SC__ compiler
1995-02-27 10:13:37 +00:00
caeaafccf7
don't complain about too many args if arg is a dict
1995-02-27 10:13:23 +00:00
295d171650
explicitly init flags in methodlists
1995-02-19 15:55:19 +00:00
67ca701939
NeXT/Sparc 3.3 fix
1995-02-13 16:38:41 +00:00
9fa2c11613
use Py_CHARMASK; and don't check for neg. float to the float power here
1995-02-10 17:00:37 +00:00
2497eada60
make size arg signed
1995-02-10 17:00:27 +00:00
a46d51d9a4
round up list item counts to improve realloc performance
1995-01-26 22:59:43 +00:00
6978503235
added findmethodinchain and methodchain data types
1995-01-26 22:58:48 +00:00
e95d92b65e
removed unused vars
1995-01-26 00:39:21 +00:00
27e916fd35
apply dictclear to dict of deleted modules
1995-01-26 00:39:00 +00:00
49b11fed70
move callable() here
1995-01-26 00:38:22 +00:00
e9c6bcd813
fix leak in func_dealloc (forgot to decref name)
1995-01-20 16:58:19 +00:00
7874d1fe7e
Fix NULL dereference in case of out-of-memory condition
1995-01-19 12:09:27 +00:00
32b582b953
fix strobject() behavior
1995-01-17 16:35:13 +00:00
b0fe3a9312
added reverselist; free recycling bin on error exit
1995-01-17 16:34:45 +00:00
3535f6e0a1
long_scan is no longer used
1995-01-17 16:34:13 +00:00
ce00509702
make a few things static
1995-01-17 16:33:39 +00:00
4d3468deab
don't declare fmod/pow for any STDC compiler
1995-01-17 16:33:14 +00:00
b4e7e25fe6
different init for __builtins__
1995-01-17 16:27:25 +00:00
087579ea51
added $& to $(LIB) target for Sequent
1995-01-17 16:11:29 +00:00
ae7bf1a5e7
fix reentrancy bug in slice assignment
1995-01-17 10:21:11 +00:00
20566845c6
properly implement cmp() for class instances
1995-01-12 11:26:10 +00:00
5524a59b09
move coerce() from bltinmodule.c to object.c and implement builtin_coerce() differently
1995-01-10 15:26:20 +00:00
879c581826
implement coercions involving instances properly
1995-01-10 15:24:06 +00:00
c206c766dd
fix memory leak and null pointer dereference
1995-01-10 15:23:19 +00:00
10393b1708
add restrictions in restricted mode
1995-01-10 10:39:49 +00:00
c113482871
add builtins handling and restricted flag
1995-01-10 10:39:16 +00:00
e7d444f785
* Objects/classobject.c: added 5th (function) parameter to
...
instancebinop, to support things like Rational * float; added
documentation strings to classes and methods
1995-01-07 12:35:18 +00:00
cab650db8e
* Objects/methodobject.c: changed drastically, the object now
...
contains a pointer to the struct methodlist (which must be
static); added attributes __name__, __doc__ and __self__
1995-01-07 12:34:58 +00:00
5bd3805ae9
Added __doc__ attribute (alias func_doc), initialized from first
...
constant in code object if it is a string, else None
1995-01-07 12:01:30 +00:00
8b14b4c733
initialize __doc__ to None
1995-01-07 11:59:29 +00:00
29ca26eebf
added getattr(), supporting __doc__ and _name__
1995-01-07 11:58:15 +00:00
016564ab51
attribute-less object is AttributeError, not TypeError
1995-01-07 11:54:44 +00:00
6610ad9d6b
Added 1995 to copyright message.
...
floatobject.c: fix hash().
methodobject.c: support METH_FREENAME flag bit.
1995-01-04 19:07:38 +00:00
efc8713428
* Objects/mappingobject.c (mappingremove): don't call
...
lookmapping() for empty dictionary
1995-01-02 19:42:39 +00:00
d7047b395e
Lots of minor changes. Note for mappingobject.c: the hash table pointer
...
can now be NULL.
1995-01-02 19:07:15 +00:00
bb3c5f7406
fix comparison of instances without _-cmp__
1994-11-10 22:31:02 +00:00
b9a6d12498
Comparison of two class instances without __cmp__ or __rcmp__ methods
...
was broken.
1994-10-19 15:11:52 +00:00
03093a248d
* Include/classobject.h, Objects/classobject.c, Python/ceval.c:
...
entirely redone operator overloading. The rules for class
instances are now much more relaxed than for other built-in types
(whose coerce must still return two objects of the same type)
* Objects/floatobject.c: add overflow check when converting float
to int and implement truncation towards zero using ceil/float
* Objects/longobject.c: change ValueError to OverflowError when
converting to int
* Objects/rangeobject.c: modernized
* Objects/stringobject.c: use HAVE_LIMITS instead of __STDC__
* Objects/xxobject.c: changed to use new style (not finished?)
1994-09-28 15:51:32 +00:00
9776adf565
rearranged code in debugging version of DELREF to avoid touching data
...
after it has been freed.
1994-09-07 14:36:45 +00:00
52ca98a390
Yet another version (by me) of __getattr__ etc.
1994-09-05 07:32:29 +00:00
e773754ae5
Mods (really diffs to 2.29) by Michael Scharf for alternative __getattr__ etc.
1994-09-05 07:31:41 +00:00
1d5735e846
Merge back to main trunk
1994-08-30 08:27:36 +00:00
013142a95f
fix nasty bug in resizing (formatstring)
1994-08-30 08:19:36 +00:00
bf8c0e336f
mods by Andrew Kuchling to implement
...
pow(x,y,z) == pow(x,y)%z, but without incurring overflow
Correct problems found by THINK C 6.0
1994-08-29 12:48:32 +00:00
eb1fafcec1
New patches by Andrew to fix various problems
...
Add cast for Lance
1994-08-29 12:47:19 +00:00
6cd2fe043b
Correct problems found by THINK C 6.0
1994-08-29 12:45:32 +00:00
f0171a1626
* configure.in, */Makefile*.in: OPT can now be specified in the
...
env at configure time and will then be put in all Makefiles as
default
* */Makefile*.in: remove lib*.a before adding to it
1994-08-23 14:06:18 +00:00
91ab4a8353
If an attribute is deleted, __setattr__ is called with 2 instead of 3
...
arguments (adding __delattr__ was deemed too much overhead)
1994-08-16 22:13:47 +00:00
0b7d02a36f
New patches by Andrew to fix various problems
1994-08-12 12:52:35 +00:00
e149fa2a1e
* Objects/classobject.c, Include/classobject.h: added __getattr__
...
and __setattr__ support to override getattr(x, name) and
setattr(x, name, value) for class instances. This uses a special
hack whereby the class is supposed to be static: the __getattr__
and __setattr__ methods are looked up only once and saved in the
instance structure for speed
1994-08-12 12:49:46 +00:00
Guido van Rossum
Barry Warsaw
Jack Jansen
Sjoerd Mullender