Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
TLS 1.3 behaves slightly different than TLS 1.2. Session tickets and TLS
client cert auth are now handled after the initialy handshake. Tests now
either send/recv data to trigger session and client certs. Or tests
ignore ConnectionResetError / BrokenPipeError on the server side to
handle clients that force-close the socket fd.
To test TLS 1.3, OpenSSL 1.1.1-pre7-dev (git master + OpenSSL PR
https://github.com/openssl/openssl/pull/6340) is required.
Signed-off-by: Christian Heimes <christian@python.org>
Change TLS 1.3 cipher suite settings for compatibility with OpenSSL
1.1.1-pre6 and newer. OpenSSL 1.1.1 will have TLS 1.3 cipers enabled by
default.
Also update multissltests and Travis config to test with latest OpenSSL.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module now contains OP_NO_RENEGOTIATION constant, available with
OpenSSL 1.1.0h or 1.1.1.
Note, OpenSSL 1.1.0h hasn't been released yet.
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module function ssl.wrap_socket() has been de-emphasized
and deprecated in favor of the more secure and efficient
SSLContext.wrap_socket() method.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module now detects missing NPN support in LibreSSL.
Co-Authored-By: Bernard Spil <brnrd@FreeBSD.org>
Signed-off-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
SSLSocket.wrap_bio() and SSLSocket.wrap_socket() hard-code SSLObject and
SSLSocket as return types. In the light of future deprecation of
ssl.wrap_socket() module function and direct instantiation of SSLSocket,
it is desirable to make the return type of SSLSocket.wrap_bio() and
SSLSocket.wrap_socket() customizable.
Signed-off-by: Christian Heimes <christian@python.org>
The SSL module now raises SSLCertVerificationError when OpenSSL fails to
verify the peer's certificate. The exception contains more information about
the error.
Original patch by Chi Hsuan Yen
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-29136: Add TLS 1.3 support
TLS 1.3 introduces a new, distinct set of cipher suites. The TLS 1.3
cipher suites don't overlap with cipher suites from TLS 1.2 and earlier.
Since Python sets its own set of permitted ciphers, TLS 1.3 handshake
will fail as soon as OpenSSL 1.1.1 is released. Let's enable the common
AES-GCM and ChaCha20 suites.
Additionally the flag OP_NO_TLSv1_3 is added. It defaults to 0 (no op) with
OpenSSL prior to 1.1.1. This allows applications to opt-out from TLS 1.3
now.
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1.0 to 1.1.0e aborted the handshake when server and client
could not agree on a protocol using ALPN. OpenSSL 1.1.0f changed that.
The most recent version now behaves like OpenSSL 1.0.2 again. The ALPN
callback can pretend to not been set.
See https://github.com/openssl/openssl/pull/3158 for more details
Signed-off-by: Christian Heimes <christian@python.org>
Zhiming Wang
Stéphane Wirtel
Cheryl Sabella
Christian Heimes
Marcin Niemira
Andrés Delfino
Mayank Singhal
Serhiy Storchaka
Matt Eaton
Benjamin Peterson
Sanyam Khurana
jimmy
Mandeep Singh
Felipe
Chandan Kumar
Nathaniel J. Smith
Marco Buttu
Alex Gaynor
Berker Peksag