The moved tests use a local server rather than going out to external servers.
Accepts patch from issue2429.
Contributed by Jerry Seutter & Michael Foord (fuzzyman) at PyCon 2008.
reliable, but I'm not convinced it is the right solution. We need
to determine if this causes the test to hang on any platforms or do
other bad things.
Even if it gets the test to pass reliably, it might be that we want
to fix this in socket. The socket returned from accept() is different
on different platforms (inheriting attributes or not) and we might
want to ensure that the attributes (at least blocking) is the same
across all platforms.
up after it was joined had a traceback pointing to that thread's (deleted)
target attribute, while the test was trying to check that the target was
destroyed. Big thanks to Antoine Pitrou for diagnosing the race and pointing
out sys.exc_clear() to kill the exception early. This fixes issue 2496.
svn+ssh://pythondev@svn.python.org/python/branches/trunk-bytearray
........
r61750 | christian.heimes | 2008-03-22 20:47:44 +0100 (Sat, 22 Mar 2008) | 1 line
Copied files from py3k w/o modifications
........
r61752 | christian.heimes | 2008-03-22 20:53:20 +0100 (Sat, 22 Mar 2008) | 7 lines
Take One
* Added initialization code, warnings, flags etc. to the appropriate places
* Added new buffer interface to string type
* Modified tests
* Modified Makefile.pre.in to compile the new files
* Added bytesobject.c to Python.h
........
r61754 | christian.heimes | 2008-03-22 21:22:19 +0100 (Sat, 22 Mar 2008) | 2 lines
Disabled bytearray.extend for now since it causes an infinite recursion
Fixed serveral unit tests
........
r61756 | christian.heimes | 2008-03-22 21:43:38 +0100 (Sat, 22 Mar 2008) | 5 lines
Added PyBytes support to several places:
str + bytearray
ord(bytearray)
bytearray(str, encoding)
........
r61760 | christian.heimes | 2008-03-22 21:56:32 +0100 (Sat, 22 Mar 2008) | 1 line
Fixed more unit tests related to type('') is not unicode
........
r61763 | christian.heimes | 2008-03-22 22:20:28 +0100 (Sat, 22 Mar 2008) | 2 lines
Fixed more unit tests
Fixed bytearray.extend
........
r61768 | christian.heimes | 2008-03-22 22:40:50 +0100 (Sat, 22 Mar 2008) | 1 line
Implemented old buffer interface for bytearray
........
r61772 | christian.heimes | 2008-03-22 23:24:52 +0100 (Sat, 22 Mar 2008) | 1 line
Added backport of the io module
........
r61775 | christian.heimes | 2008-03-23 03:50:49 +0100 (Sun, 23 Mar 2008) | 1 line
Fix str assignement to bytearray. Assignment of a str of size 1 is interpreted as a single byte
........
r61805 | christian.heimes | 2008-03-23 19:33:48 +0100 (Sun, 23 Mar 2008) | 3 lines
Fixed more tests
Fixed bytearray() comparsion with unicode()
Fixed iterator assignment of bytearray
........
r61809 | christian.heimes | 2008-03-23 21:02:21 +0100 (Sun, 23 Mar 2008) | 2 lines
str(bytesarray()) now returns the bytes and not the representation of the bytearray object
Enabled and fixed more unit tests
........
r61812 | christian.heimes | 2008-03-23 21:53:08 +0100 (Sun, 23 Mar 2008) | 3 lines
Clear error PyNumber_AsSsize_t() fails
Use CHARMASK for ob_svall access
disabled a test with memoryview again
........
r61819 | christian.heimes | 2008-03-23 23:05:57 +0100 (Sun, 23 Mar 2008) | 1 line
Untested updates to the PCBuild directory
........
r61917 | christian.heimes | 2008-03-26 00:57:06 +0100 (Wed, 26 Mar 2008) | 1 line
The type system of Python 2.6 has subtle differences to 3.0's. I've removed the Py_TPFLAGS_BASETYPE flags from bytearray for now. bytearray can't be subclasses until the issues with bytearray subclasses are fixed.
........
r61920 | christian.heimes | 2008-03-26 01:44:08 +0100 (Wed, 26 Mar 2008) | 2 lines
Disabled last failing test
I don't understand what the test is testing and how it suppose to work. Ka-Ping, please check it out.
........
r61930 | christian.heimes | 2008-03-26 12:46:18 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytes warning code
........
r61933 | christian.heimes | 2008-03-26 13:20:46 +0100 (Wed, 26 Mar 2008) | 1 line
Fixed a bug in the new buffer protocol. The buffer slots weren't copied into a subclass.
........
r61934 | christian.heimes | 2008-03-26 13:25:09 +0100 (Wed, 26 Mar 2008) | 1 line
Re-enabled bytearray subclassing - all tests are passing.
........
an open file. This doesn't seem to be a problem in 2.6, but that appears
to be somewhat accidental (specific to reference counting). When this
gets merged to 3.0, it will make the 3.0 code simpler.
the connect would succeed before the timeout occurred. Try using an
address and port that hopefully doesn't exist to ensure we get no response.
If this doesn't work, we can use a public address close to python.org
and hopefully that address never gets taken.
* disable gc during the test run because we are spawning objects and there
was an exception when calling Popen.__del__
* Always set an alarm handler so the process doesn't exit if the test fails
(should probably add assertions on the value of hndl_called in more places)
* Using a negative time causes Linux to treat it as zero, so disable that test.
timeout (10.0025) is more than 2 seconds more than expected (0.001)
I'm assuming this problem is caused by DNS lookup. This change
does a DNS lookup of the hostname before trying to connect, so the time
is not included.
The patch adds wrappers for the Linux epoll syscalls and the BSD kqueue syscalls. Thanks to Thomas Herve and the Twisted people for their support and help.
TODO: Finish documentation documentation
failures. The test for enumerate-after-join is now a little less rigorous, but
the bug it references says the error happened in the first couple iterations,
so 100 iterations should still be enough.
cProfile was useful for identifying the slow tests here.
least two of the linux build bots aren't leaving zombie processes around for
os.waitpid to wait for, causing ECHILD errors. This would be a symptom of a bug
somewhere, but probably not in signal itself.
argument error on ioctl. This was caused by the added test_fcntl ioctl test
that hard coded 0 as the fd to use. Without a terminal, this fails on solaris.
(it passed from the command line on sol 10, both 32 and 64 bit)
Also, test_ioctl exists so I moved the test into there where it belongs.
when used on platforms that actually define ioctl as taking an unsigned long.
(the BSDs and OS X / Darwin)
Adds a unittest for fcntl.ioctl that tests what happens with both positive and
negative numbers.
This was done because of issue1471 but I'm not able to reproduce -that- problem
in the first place on Linux 32bit or 64bit or OS X 10.4 & 10.5 32bit or 64 bit.
This work is substantially Anthony Baxter's, from issue
1633807. I just freshened it, made a few minor tweaks,
and added the test cases. I also created issue 2412,
which is to check for 2to3's behavior with the print
function. I also added myself to ACKS.
uid and gid input to accept values >=2**31 as valid while still accepting
negative numbers to pass -1 to chown for "no change".
Fixes issue1747858.
This should be backported to release25-maint.
a) no sound card entirely
b) legacy beep driver has been disabled
c) the legacy beep driver has been uninstalled
Sometimes RuntimeErrors are raised, sometimes they're not. If _have_soundcard() returns False, don't expect winsound.Beep() to raise a RuntimeError, as this clearly isn't the case, as demonstrated by the various Win32 XP buildbots.
regardless of the native sizeof(long) used in the integer object.
This somewhat odd behavior of returning a signed is maintained in 2.x for
compatibility reasons of always returning an integer rather than a long object.
Fixes Issue1202 for Python 2.6
Added 0b and 0o literals to tokenizer.
Modified PyOS_strtoul to support 0b and 0o inputs.
Modified PyLong_FromString to support guessing 0b and 0o inputs.
Renamed test_hexoct.py to test_int_literal.py and added binary tests.
Added upper and lower case 0b, 0O, and 0X tests to test_int_literal.py
Added "Z" format_char to PyOS_ascii_formatd to support empty float presentation type.
Renamed buf_size in PyOS_ascii_formatd to more accurately reflect it's meaning.
Modified format.__float__ to use the new "Z" format as the default.
Added test cases.
Unlike Scheme where exactness is implemented as taints, the Python
implementation associated exactness with data types. This created
inheritance issues (making an exact subclass of floats would result
in the subclass having both an explicit Exact registration and an
inherited Inexact registration). This was a problem for the
decimal module which was designed to span both exact and inexact
arithmetic. There was also a question of use cases and no examples
were found where ABCs for exactness could be used to improve code.
One other issue was having separate tags for both the affirmative
and negative cases. This is at odds with the approach taken
elsewhere in the Python (i.e. we don't have an ABC both Hashable
and Unhashable).
across platforms: it should now raise OverflowError on all
platforms. (Previously it raised OverflowError only on
non IEEE 754 platforms.)
Also fix the (already existing) test for this behaviour
so that it actually raises TestFailed instead of just
referencing it.
SocketServers. The core of the patch was written by Pedro Werneck, but any bugs
are mine. I've also rearranged the code for timeouts in order to avoid
interfering with the shutdown poll.
before timing out. This doesn't change the duration of the test under
normal circumstances. This is targetted at fixing the spurious failures
on the FreeBSD buildbot primarily.
would give bogus error messages, because of untested exceptions::
>>> f(**g(1=2))
XXX undetected error
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'int' object is not iterable
instead of the expected SyntaxError: keyword can't be an expression
Will backport.
which forbids constructing types that have it set. The effect is to speed
./python.exe -m timeit -s 'import abc' -s 'class Foo(object): __metaclass__ = abc.ABCMeta' 'Foo()'
up from 2.5us to 0.201us. This fixes issue 1762.
My tests don't show the promised speed up of 10%. The code is as fast as the old code for simple cases and slightly faster for complex cases with several of args and kwargs. But the patch simplifies the code, too.
(This may fail on some slow platforms, but we can fix those cases which
should be relatively isolated and easier to find now.)
Move two test cases that didn't require a server to be started
to a separate TestCase. These tests were taking 3 seconds which
is what the timeout was set to.
run the test simultaneously. The simplest thing I found that worked
on both Windows and Unix was to use the PID. It's unique so should be
sufficient. This should prevent many of the spurious failures of
the automated tests since they run as different users.
Also cleanup the directory consistenly in the tearDown methods.
It would be nice if someone ensured that the directories are always
created with a consistent name.
class RunSelfFunction(object):
def __init__(self):
self.thread = threading.Thread(target=self._run)
self.thread.start()
def _run(self):
pass
from creating a permanent cycle between the object and the thread by having the
Thread delete its references to the object when it completes.
As an example of the effect of this bug, paramiko.Transport inherits from
Thread to avoid it.
Remove automatic handling of datetime.date and datetime.time.
This breaks backward compatibility, but python-dev discussion was strongly
against this automatic conversion; see the bug for a link.
* Fix-up issues pointed-out by Neal Norwitz.
* Add extensive comments.
* The lz->result variable is now a tuple instead of a list.
* Use fast macro getitem/setitem calls so most code is in-line.
* Re-use the result tuple if available (modify in-place instead of copy).
Highlights:
- Adding PyObject_Format.
- Adding string.Format class.
- Adding __format__ for str, unicode, int, long, float, datetime.
- Adding builtin format.
- Adding ''.format and u''.format.
- str/unicode fixups for formatters.
The files in Objects/stringlib that implement PEP 3101 (stringdefs.h,
unicodedefs.h, formatter.h, string_format.h) are identical in trunk
and py3k. Any changes from here on should be made to trunk, and
changes will propogate to py3k).
They still remain fragile.
For example, a call to assertEqual currently does not make any allocation
(which surprised me at first).
But this can change when gc.collect also deletes the numerous "zombie frames"
attached to each function.
./python.exe -m timeit -s 'from fractions import Fraction; f = Fraction(3, 2)' 'isinstance(3, Fraction); isinstance(f, Fraction)'
from 12.3 usec/loop to 3.44 usec/loop and
./python.exe -m timeit -s 'from fractions import Fraction' 'Fraction(3, 2)'
from 48.8 usec to 23.6 usec by avoiding genexps and sets in __instancecheck__
and inlining the common case from __subclasscheck__.
to GET, so it loses its payload. So, it also must lose the
headers related to the payload (if it has no content any more,
it shouldn't indicate content length and type).
* Convert both to unittest.
* Use the same unit testing code.
* Include the expected output in both test files.
* Make it possible to regenerate the expected output by running
the file as a script with an '-r' argument.
The mapping between bytecode offsets and source lines (lnotab) did not contain
an entry for the beginning of the loop.
Now it does, and the lnotab can be a bit larger:
in particular, several statements on the same line generate several entries.
However, this does not bother the settrace function, which will trigger only
one 'line' event.
The lnotab seems to be exactly the same as with python2.4.
I implemented the function sys._compact_freelists() and C API functions PyInt_/PyFloat_CompactFreeList() to compact the pre-allocated blocks of ints and floats. They allow the user to reduce the memory usage of a Python process that deals with lots of numbers.
The patch also renames sys._cleartypecache to sys._clear_type_cache
which isn't as bad as it sounds. The close() *should* raise an exception,
so if it didn't we should give more time to sync and really raise it.
Will backport.
global to determine when the server is ready to be used. This slows the test
down, but should make it correct. There was a race condition before where the
server could have assigned a port, yet it wasn't ready to serve requests. If
the client sent a request before the server was completely ready, it would get
an exception. There was machinery to try to handle this condition. All of
that should be unnecessary and removed if this change works. A NOTE was
added as a comment about what needs to be fixed.
The buildbots will tell us if there are more errors or
if this test is now stable.
in case there were transient failures. This will hopefully silence
the buildbots for this test. As we find other tests that have a problem,
we can fix with a similar strategy assuming it is successful. It worked
on my box in a loop for 10+ runs where it would have an exception otherwise.
whole construct away, even when an 'else' clause is present::
while 0:
print("no")
else:
print("yes")
did not generate any code at all.
Now the compiler emits the 'else' block, like it already does for 'if' statements.
Will backport.
type of encrypted zip files. Files using extended local headers
needed to compare the check byte against different values. (according
to reading the infozip unzip crypt.c source code)
Fixes issue1003.
precision. This has been discussed at http://bugs.python.org/issue1682. It's
useful primarily for teaching, but it also demonstrates how to implement a
member of the numeric tower, including fallbacks for mixed-mode arithmetic.
I expect to write a couple more patches in this area:
* Rational.from_decimal()
* Rational.trim/approximate() (maybe with different names)
* Maybe remove the parentheses from Rational.__str__()
* Maybe rename one of the Rational classes
* Maybe make Rational('3/2') work.
Surprising behaviour of the "$" regexp: it matches the
end of the string, AND just before the newline at the end
of the string::
re.sub('$', '#', 'foo\n') == 'foo#\n#'
Python is consistent with Perl and the pcre library, so
we just document it.
Guido prefers "\Z" to match only the end of the string.
round included:
* Revert round to its 2.6 behavior (half away from 0).
* Because round, floor, and ceil always return float again, it's no
longer necessary to have them delegate to __xxx___, so I've ripped
that out of their implementations and the Real ABC. This also helps
in implementing types that work in both 2.6 and 3.0: you return int
from the __xxx__ methods, and let it get enabled by the version
upgrade.
* Make pow(-1, .5) raise a ValueError again.
* Make the _replace() method respect subclassing.
* Using property() to make _fields read-only wasn't a good idea.
It caused len(Point._fields) to fail.
* Add note to _cast() about length checking and alternative with the star-operator.
the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361,
r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new
documentation. The only significant difference is that round(x) returns a float
to preserve backward-compatibility. See http://bugs.python.org/issue1689.
r58207 and r58247 patch logic is reversed. I noticed this when I
tried to use urllib to retrieve a file which required auth.
Fix that and add a test for 401 error to verify.
Also fix the test by having the test classes inherit from object.
Are the getter/setter/deleter attributes supposed to be able to chain? As of
right now they can't as the property tries to call what the property returns,
which is another property when they are chained.
This changes the rules for when __hash__ is inherited slightly,
by allowing it to be inherited when one or more of __lt__, __le__,
__gt__, __ge__ are overridden, as long as __eq__ and __ne__ aren't.
This adds signal.set_wakeup_fd(fd) which sets a file descriptor to
which a zero byte will be written whenever a C exception handler runs.
I added a simple C API as well, PySignal_SetWakeupFd(fd).
Issue #1580: New free format floating point representation based on "Floating-Point Printer Sample Code", by Robert G. Burger. For example repr(11./5) now returns '2.2' instead of '2.2000000000000002'.
Thanks to noam for the patch! I had to modify doubledigits.c slightly to support X64 and IA64 machines on Windows. I also added the new file to the three project files.
on 32-bit systems on 64-bit systems, and vice versa. As a consequence
of the change, Random pickles created by Python 2.6 cannot be loaded
in Python 2.5.
Added PyFloat_GetMax(), PyFloat_GetMin() and PyFloat_GetInfo() to the float API.
Added a dictionary sys.float_info with information about the internal floating point type to the sys module.
(in deallocation of running threads, for example), so the PyGILState_Release()
function must still be functional.
On the other hand, _PyGILState_Fini() only frees memory, and can be called later.
Backport candidate, but only after some experts comment on it.
number: now it does not store the mantissa as a tuple
of numbers, but as a string.
This avoids a lot of conversions, and achieves a
speedup of 40%. The API remains intact.
Thanks Mark Dickinson.
newlines; it doesn't. To rectify this the string returned replaces all
instances of os.linesep with '\n' to fake universal newline support.
Backport candidate.
as usual with slicing (both with str and unicode strings). This
fixes issue 1259.
For str only the stringobject.c file was modified. But for unicode,
I needed to repeat in the four functions a lot of code, so created
a new function that does part of the job for them (and placed it in
find.h, following a suggestion of Barry).
Also added tests for this behaviour.
(suprisingly, this simplifies the signature, improves clarity, and is comparably fast).
Update the docs to reflect a previous change to the function name.
Add an example to the docs showing how to override the default __repr__ method.
Correction for issue1265 (pdb bug with "with" statement).
When an unfinished generator-iterator is garbage collected, PyEval_EvalFrameEx
is called with a GeneratorExit exception set. This leads to funny results
if the sys.settrace function itself makes use of generators.
A visible effect is that the settrace function is reset to None.
Another is that the eventual "finally" block of the generator is not called.
It is necessary to save/restore the exception around the call to the trace
function.
This happens a lot with py3k: isinstance() of an ABCMeta instance runs
def __instancecheck__(cls, instance):
"""Override for isinstance(instance, cls)."""
return any(cls.__subclasscheck__(c)
for c in {instance.__class__, type(instance)})
which lets an opened generator expression each time it returns True.
Backport candidate, even if the case is less frequent in 2.5.
coefficient numbers, floats in the sign, and other details that
generated directly the wrong number in the best case, or triggered
misfunctionality in the alorithms.
Test cases added for these issues. Thanks Mark Dickinson.
it closes itself. When the stream is read in several calls to read(n),
it should behave in the same way if HTTPConnection knows where the end
of the stream is (through self.length). Added a test case for this
behaviour.
This should make the tests more robust at the expense of allowing
tests to be sloppier by not requiring them to cleanup after themselves.
(It will legitamitely help when running two test suites simultaneously
or if another process is already using one of the predefined ports.)
Also simplifies (slightLy) the exception handling elsewhere.
Let the field spec be either a string or a non-string sequence (suggested by Martin Blais with use cases).
Improve the error message in the case of a SyntaxError (caused by a duplicate field name).
Add maxlen support to deque() and fixup docs.
Partially fix __reduce__(). The None as a third arg was no longer supported.
Still needs work on __reduce__() to handle recursive inputs.
with Cawlishaw by mail, and he basically confirmed that to these is_*
operations, there's no need to return Decimal(0) and Decimal(1) if
the language supports the False and True booleans.
Also added a few tests for the these functions in extra.decTest, since
they are mostly untested (apart from the doctests).
Thanks Mark Dickinson
predictable to being completely predictable. The value of hash(n)
is unchanged for any n that's small enough to be representable as an
int, and also unchanged for the vast majority of long integers n of
reasonable size.
Allows optional commas in the field-name spec (help when named tuples are used in conjuction with sql queries).
Adds the __fields__ attribute for introspection and to support conversion to dictionary form.
Adds a __replace__() method similar to str.replace() but using a named field as a target.
Clean-up spelling and presentation in doc-strings.
adding the 'makefile' method to ssl.SSLSocket, and importing the
requisite fakefile class from socket.py, and making the appropriate
changes to it to make it use the SSL connection.
Added sample HTTPS server to test_ssl.py, and test that uses it.
Change SSL tests to use https://svn.python.org/, instead of
www.sf.net and pop.gmail.com.
Added utility function to ssl module, get_server_certificate,
to wrap up the several things to be done to pull a certificate
from a remote server.
fully updated to the latests Decimal Specification (v1.66) and the
latests test cases (v2.56).
Thanks to Mark Dickinson for all his help during this process.
Backport abc.py and isinstance/issubclass overloading to 2.6.
I had to backport test_typechecks.py myself, and make one small change
to abc.py to avoid duplicate work when x.__class__ and type(x) are the
same.
Make sure the type of the return value of re.sub(x, y, z) is the type
of y+x (i.e. unicode if either is unicode, str if they are both str)
even if there are no substitutions or if x==z (which triggered various
special cases in join_list()).
Could be backported to 2.5; no need to port to 3.0.
* Much expanded test suite:
All protocols tested against all other protocols.
All protocols tested with all certificate options.
Tests for bad key and bad cert.
Test of STARTTLS functionality.
Test of RAND_* functions.
* Fixes for threading/malloc bug.
* Issue 1065 fixed:
sslsocket class renamed to SSLSocket.
sslerror class renamed to SSLError.
Function "wrap_socket" now used to wrap an existing socket.
* Issue 1583946 finally fixed:
Support for subjectAltName added.
Subject name now returned as proper DN list of RDNs.
* SSLError exported from socket as "sslerror".
* RAND_* functions properly exported from ssl.py.
* Documentation improved:
Example of how to create a self-signed certificate.
Better indexing.
alone class. This addresses the primary concern in
http://bugs.python.org/issue1706815
python-dev discussion here:
http://mail.python.org/pipermail/python-dev/2007-July/073749.html
I chose IOError rather than EnvironmentError as the base class since
socket objects are often used as transparent duck typed file objects
in code already prepared to deal with IOError exceptions.
also a minor fix:
urllib2 - fix a couple places where IOError was raised rather than URLError.
for better or worse, URLError already inherits from IOError so
this won't break any existing code.
test_urllib2net - replace bad ftp urls.
ever going back out to Python code in PyObject_Call(). Required introducing a
static RuntimeError instance so that normalizing an exception there is no
reliance on a recursive call that would put the exception system over the
recursion check itself.
1) Improve the documentation of the SSL module, with a fuller
explanation of certificate usage, another reference, proper
formatting of this and that.
2) Fix Windows bug in ssl.py, and general bug in sslsocket.close().
Remove some unused code from ssl.py. Allow accept() to be called on
sslsocket sockets.
3) Use try-except-else in import of ssl in socket.py. Deprecate use of
socket.ssl().
4) Remove use of socket.ssl() in every library module, except for
test_socket_ssl.py and test_ssl.py.
- Specialcase extended slices that amount to a shallow copy the same way as
is done for simple slices, in the tuple, string and unicode case.
- Specialcase step-1 extended slices to optimize the common case for all
involved types.
- For lists, allow extended slice assignment of differing lengths as long
as the step is 1. (Previously, 'l[:2:1] = []' failed even though
'l[:2] = []' and 'l[:2:None] = []' do not.)
- Implement extended slicing for buffer, array, structseq, mmap and
UserString.UserString.
- Implement slice-object support (but not non-step-1 slice assignment) for
UserString.MutableString.
- Add tests for all new functionality.
> the better option. Then the openssl command in the test code can be turned
> into a comment describing how the test data was pregenerated.
Here's a patch that does that.
Bill
exceptions raised in the test server thread, since SimpleXMLRPCServer
does not gracefully handle them. Changed number of requests handled
by tests server thread to one (was 2) because no tests require more
than one request. [GSoC - Alan McIntyre]
1) Fixes the bug that two class names are initial-lower-case.
2) Replaces the poll waiting for the server to become ready with
a threading.Event signal.
Georg Brandl
Gregory P. Smith
Neal Norwitz
Martin v. Löwis
Jeffrey Yasskin
Amaury Forgeot d'Arc
Christian Heimes
Eric Smith
Jerry Seutter
Mark Dickinson
Raymond Hettinger
Facundo Batista
Steven Bethard
Trent Nelson
Brett Cannon
David Wolever
Sean Reifscheider
Skip Montanaro
Thomas Heller
Gerhard Häring
Andrew M. Kuchling
Lars Gustäbel
Nick Coghlan
Hye-Shik Chang
Guido van Rossum
Fred Drake
Kurt B. Kaiser
Alexandre Vassalotti
Armin Rigo
Walter Dörwald
Bill Janssen
Travis E. Oliphant
Thomas Wouters