Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670.
(cherry picked from commit 9fb051f032)
Co-authored-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue34670
OpenSSL follows the convention that whenever you call a function, it
returns an error indicator value; and if this value is negative, then
you need to go look at the actual error code to see what happened.
Commit c6fd1c1c3a introduced a small mistake in
_ssl__SSLSocket_shutdown_impl: instead of checking whether the error
indicator was negative, it started checking whether the actual error
code was negative, and it turns out that the error codes are never
negative. So the effect was that 'unwrap()' lost the ability to raise
SSL errors.
https://bugs.python.org/issue34759
(cherry picked from commit c0da582b22)
Co-authored-by: Nathaniel J. Smith <njs@pobox.com>
Update all test certs and keys to use future proof crypto settings:
* 3072 bit RSA keys
* SHA-256 signature
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit e6dac00779)
Downstream vendors have started to deprecate weak keys. Update all RSA keys
and DH params to use at least 2048 bits.
Finite field DH param file use RFC 7919 values, generated with
certtool --get-dh-params --sec-param=high
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 88bfd0bce0)
Co-authored-by: Christian Heimes <christian@python.org>
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
(cherry picked from commit ef24b6c54d)
Co-authored-by: Christian Heimes <christian@python.org>
TLS 1.3 behaves slightly different than TLS 1.2. Session tickets and TLS
client cert auth are now handled after the initialy handshake. Tests now
either send/recv data to trigger session and client certs. Or tests
ignore ConnectionResetError / BrokenPipeError on the server side to
handle clients that force-close the socket fd.
To test TLS 1.3, OpenSSL 1.1.1-pre7-dev (git master + OpenSSL PR
https://github.com/openssl/openssl/pull/6340) is required.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 529525fb5a)
Change TLS 1.3 cipher suite settings for compatibility with OpenSSL
1.1.1-pre6 and newer. OpenSSL 1.1.1 will have TLS 1.3 cipers enabled by
default.
Also update multissltests and Travis config to test with latest OpenSSL.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit e8eb6cb792)
Co-authored-by: Christian Heimes <christian@python.org>
Harden ssl module against LibreSSL CVE-2018-8970.
X509_VERIFY_PARAM_set1_host() is called with an explicit namelen. A new test
ensures that NULL bytes are not allowed.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit d02ac25ab0)
Co-authored-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 698dde16f6)
Co-authored-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 9d50ab563d)
Co-authored-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 05d9fe32a1)
Co-authored-by: Christian Heimes <christian@python.org>
Add tests to verify connection with secp384r1 ECDH curves.
(cherry picked from commit b7b9225831)
Co-authored-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
(cherry picked from commit 141c5e8c24)
Co-authored-by: Christian Heimes <christian@python.org>
ssl.match_hostname() has been simplified and no longer depends on re and
ipaddress module for wildcard and IP addresses. Error reporting for invalid
wildcards has been improved.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit aef1283ba4)
Co-authored-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
(cherry picked from commit 11a1493bc4)
Co-authored-by: Christian Heimes <christian@python.org>
Add test cases for IDNA 2003 and 2008 host names. IDNA 2003
internationalized host names are working since bpo-31399 has landed. IDNA
2008 deviations are still broken and will be fixed in another patch.
Signed-off-by: Christian Heimes <christian@python.org>
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
Add test certs and test for ECDSA cert and EC/RSA dual mode.
I'm also adding certs for IDNA 2003/2008 tests and simplify some test
data handling.
Signed-off-by: Christian Heimes <christian@python.org>
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
SSLSocket.wrap_bio() and SSLSocket.wrap_socket() hard-code SSLObject and
SSLSocket as return types. In the light of future deprecation of
ssl.wrap_socket() module function and direct instantiation of SSLSocket,
it is desirable to make the return type of SSLSocket.wrap_bio() and
SSLSocket.wrap_socket() customizable.
Signed-off-by: Christian Heimes <christian@python.org>
The SSL module now raises SSLCertVerificationError when OpenSSL fails to
verify the peer's certificate. The exception contains more information about
the error.
Original patch by Chi Hsuan Yen
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-29136: Add TLS 1.3 support
TLS 1.3 introduces a new, distinct set of cipher suites. The TLS 1.3
cipher suites don't overlap with cipher suites from TLS 1.2 and earlier.
Since Python sets its own set of permitted ciphers, TLS 1.3 handshake
will fail as soon as OpenSSL 1.1.1 is released. Let's enable the common
AES-GCM and ChaCha20 suites.
Additionally the flag OP_NO_TLSv1_3 is added. It defaults to 0 (no op) with
OpenSSL prior to 1.1.1. This allows applications to opt-out from TLS 1.3
now.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-27340: Use memoryview in SSLSocket.sendall()
SSLSocket.sendall() now uses memoryview to create slices of data. This fix
support for all bytes-like object. It is also more efficient and avoids
costly copies.
Signed-off-by: Christian Heimes <christian@python.org>
* Cast view to bytes, fix typo
Signed-off-by: Christian Heimes <christian@python.org>
SSLObject.version() now correctly returns None when handshake over BIO has
not been performed yet.
Signed-off-by: Christian Heimes <christian@python.org>
In case PROTOCOL_TLS_SERVER is used for both client context and server
context, the test thread dies with OSError. Catch OSError to avoid
traceback on sys.stderr
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1.0 to 1.1.0e aborted the handshake when server and client
could not agree on a protocol using ALPN. OpenSSL 1.1.0f changed that.
The most recent version now behaves like OpenSSL 1.0.2 again. The ALPN
callback can pretend to not been set.
See https://github.com/openssl/openssl/pull/3158 for more details
Signed-off-by: Christian Heimes <christian@python.org>
AsyncoreEchoServer of test_ssl now calls
asyncore.close_all(ignore_all=True) to ensure that
asyncore.socket_map is cleared once the test completes, even if
ConnectionHandler was not correctly unregistered.
Fix the following warning:
Warning -- asyncore.socket_map was modified by test_ssl
Before: {}
After: {6: <test.test_ssl.AsyncoreEchoServer.EchoServer.ConnectionHandler>}
Miss Islington (bot)
Christian Heimes
Xtreak
Mike
Mandeep Singh
Victor Stinner
Antoine Pitrou
Steve Dower
Nathaniel J. Smith
Serhiy Storchaka
Martin Panter