forked from rrcarlosr/Jetpack
46 lines
1.1 KiB
Plaintext
46 lines
1.1 KiB
Plaintext
|
|
||
|
|
Fax with isdn4linux
|
||
|
|
===================
|
||
|
|
|
||
|
|
When enabled during kernel configuration, the tty emulator
|
||
|
|
of the ISDN subsystem is capable of the Fax Class 2 commands.
|
||
|
|
|
||
|
|
This only makes sense under the following conditions :
|
||
|
|
|
||
|
|
- You need the commands as dummy, because you are using
|
||
|
|
hylafax (with patch) for AVM capi.
|
||
|
|
- You want to use the fax capabilities of your isdn-card.
|
||
|
|
(supported cards are listed below)
|
||
|
|
|
||
|
|
|
||
|
|
NOTE: This implementation does *not* support fax with passive
|
||
|
|
ISDN-cards (known as softfax). The low-level driver of
|
||
|
|
the ISDN-card and/or the card itself must support this.
|
||
|
|
|
||
|
|
|
||
|
|
Supported ISDN-Cards
|
||
|
|
--------------------
|
||
|
|
|
||
|
|
Eicon DIVA Server BRI/PCI
|
||
|
|
- full support with both B-channels.
|
||
|
|
|
||
|
|
Eicon DIVA Server 4BRI/PCI
|
||
|
|
- full support with all B-channels.
|
||
|
|
|
||
|
|
Eicon DIVA Server PRI/PCI
|
||
|
|
- full support on amount of B-channels
|
||
|
|
depending on DSPs on board.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
The command set is known as Class 2 (not Class 2.0) and
|
||
|
|
can be activated by AT+FCLASS=2
|
||
|
|
|
||
|
|
|
||
|
|
The interface between the link-level-module and the hardware-level driver
|
||
|
|
is described in the files INTERFACE.fax and INTERFACE.
|
||
|
|
|
||
|
|
Armin
|
||
|
|
mac@melware.de
|
||
|
|
|