forked from rrcarlosr/Jetpack
157 lines
4.0 KiB
C
157 lines
4.0 KiB
C
|
/*
|
||
|
|
* U-Boot - Configuration file for BF537 PNAV board
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_BF537_PNAV_H__
|
||
|
|
#define __CONFIG_BF537_PNAV_H__
|
||
|
|
|
||
|
|
#include <asm/config-pre.h>
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Processor Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_BFIN_CPU bf537-0.2
|
||
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Clock Settings
|
||
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
||
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
||
|
|
*/
|
||
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
||
|
|
#define CONFIG_CLKIN_HZ 24576000
|
||
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
||
|
|
/* 1 = CLKIN / 2 */
|
||
|
|
#define CONFIG_CLKIN_HALF 0
|
||
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
||
|
|
/* 1 = bypass PLL */
|
||
|
|
#define CONFIG_PLL_BYPASS 0
|
||
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
||
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
||
|
|
#define CONFIG_VCO_MULT 20
|
||
|
|
/* CCLK_DIV controls the core clock divider */
|
||
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
||
|
|
#define CONFIG_CCLK_DIV 1
|
||
|
|
/* SCLK_DIV controls the system clock divider */
|
||
|
|
/* Values can range from 1-15 */
|
||
|
|
#define CONFIG_SCLK_DIV 4
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Memory Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_MEM_ADD_WDTH 10
|
||
|
|
#define CONFIG_MEM_SIZE 64
|
||
|
|
|
||
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x3b7
|
||
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
|
||
|
|
|
||
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
||
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB033B0
|
||
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
||
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Network Settings
|
||
|
|
*/
|
||
|
|
#ifndef __ADSPBF534__
|
||
|
|
#define ADI_CMDS_NETWORK 1
|
||
|
|
#define CONFIG_BFIN_MAC
|
||
|
|
#define CONFIG_RMII
|
||
|
|
#endif
|
||
|
|
#define CONFIG_HOSTNAME bf537-pnav
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Flash Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
||
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
||
|
|
#define CONFIG_SYS_FLASH_CFI
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 71
|
||
|
|
|
||
|
|
/*
|
||
|
|
* SPI Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_BFIN_SPI
|
||
|
|
#define CONFIG_ENV_SPI_MAX_HZ 30000000
|
||
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Env Storage Settings
|
||
|
|
*/
|
||
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
|
||
|
|
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
|
||
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
||
|
|
#else
|
||
|
|
#define ENV_IS_EMBEDDED
|
||
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
||
|
|
#define CONFIG_ENV_ADDR 0x20004000
|
||
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
||
|
|
#endif
|
||
|
|
#define CONFIG_ENV_SIZE 0x1000
|
||
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
||
|
|
#ifdef ENV_IS_EMBEDDED
|
||
|
|
/* WARNING - the following is hand-optimized to fit within
|
||
|
|
* the sector before the environment sector. If it throws
|
||
|
|
* an error during compilation remove an object here to get
|
||
|
|
* it linked after the configuration sector.
|
||
|
|
*/
|
||
|
|
# define LDS_BOARD_TEXT \
|
||
|
|
arch/blackfin/lib/built-in.o (.text*); \
|
||
|
|
arch/blackfin/cpu/built-in.o (.text*); \
|
||
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
||
|
|
common/env_embedded.o (.text*);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* NAND Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_NAND_PLAT
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_BASE 0x20100000
|
||
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
|
|
||
|
|
#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
|
||
|
|
#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
|
||
|
|
#define BFIN_NAND_WRITE(addr, cmd) \
|
||
|
|
do { \
|
||
|
|
bfin_write8(addr, cmd); \
|
||
|
|
SSYNC(); \
|
||
|
|
} while (0)
|
||
|
|
|
||
|
|
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
|
||
|
|
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
|
||
|
|
#define NAND_PLAT_GPIO_DEV_READY GPIO_PF12
|
||
|
|
|
||
|
|
/*
|
||
|
|
* I2C settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_I2C
|
||
|
|
#define CONFIG_SYS_I2C_ADI
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Misc Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
#define CONFIG_RTC_BFIN
|
||
|
|
#define CONFIG_UART_CONSOLE 0
|
||
|
|
|
||
|
|
/* JFFS Partition offset set */
|
||
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
|
||
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||
|
|
/* 512k reserved for u-boot */
|
||
|
|
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 15
|
||
|
|
|
||
|
|
#define CONFIG_BOOTCOMMAND "run nandboot"
|
||
|
|
#define CONFIG_BOOTARGS_ROOT "/dev/mtdblock1 rw rootfstype=yaffs"
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Pull in common ADI header for remaining command/environment setup
|
||
|
|
*/
|
||
|
|
#include <configs/bfin_adi_common.h>
|
||
|
|
|
||
|
|
#endif
|