forked from rrcarlosr/Jetpack
138 lines
3.5 KiB
C
138 lines
3.5 KiB
C
|
/*
|
||
|
|
* U-Boot - Configuration file for BF536 brettl2 board
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_BCT_BRETTL2_H__
|
||
|
|
#define __CONFIG_BCT_BRETTL2_H__
|
||
|
|
|
||
|
|
#include <asm/config-pre.h>
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Processor Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_BFIN_CPU bf536-0.3
|
||
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Clock Settings
|
||
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
||
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
||
|
|
*/
|
||
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
||
|
|
#define CONFIG_CLKIN_HZ 16384000
|
||
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
||
|
|
/* 1 = CLKIN / 2 */
|
||
|
|
#define CONFIG_CLKIN_HALF 0
|
||
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
||
|
|
/* 1 = bypass PLL */
|
||
|
|
#define CONFIG_PLL_BYPASS 0
|
||
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
||
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
||
|
|
#define CONFIG_VCO_MULT 24
|
||
|
|
/* CCLK_DIV controls the core clock divider */
|
||
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
||
|
|
#define CONFIG_CCLK_DIV 1
|
||
|
|
/* SCLK_DIV controls the system clock divider */
|
||
|
|
/* Values can range from 1-15 */
|
||
|
|
#define CONFIG_SCLK_DIV 3
|
||
|
|
#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Memory Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_MEM_ADD_WDTH 9
|
||
|
|
#define CONFIG_MEM_SIZE 32
|
||
|
|
|
||
|
|
/*
|
||
|
|
* SDRAM Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x07f6
|
||
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
|
||
|
|
|
||
|
|
#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
|
||
|
|
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
|
||
|
|
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
||
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Network Settings
|
||
|
|
*/
|
||
|
|
#ifndef __ADSPBF534__
|
||
|
|
#define ADI_CMDS_NETWORK 1
|
||
|
|
#define CONFIG_BFIN_MAC 1
|
||
|
|
#define CONFIG_NETCONSOLE 1
|
||
|
|
#define CONFIG_HOSTNAME brettl2
|
||
|
|
#define CONFIG_IPADDR 192.168.233.224
|
||
|
|
#define CONFIG_GATEWAYIP 192.168.233.1
|
||
|
|
#define CONFIG_SERVERIP 192.168.233.53
|
||
|
|
#define CONFIG_ROOTPATH "/romfs/brettl2"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Flash Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
||
|
|
#define CONFIG_SYS_FLASH_CFI
|
||
|
|
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
|
||
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
||
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 135
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Env Storage Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
||
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
|
#define CONFIG_ENV_SECT_SIZE 0x12000
|
||
|
|
|
||
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
||
|
|
#define ENV_IS_EMBEDDED
|
||
|
|
#else
|
||
|
|
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef ENV_IS_EMBEDDED
|
||
|
|
/* WARNING - the following is hand-optimized to fit within
|
||
|
|
* the sector before the environment sector. If it throws
|
||
|
|
* an error during compilation remove an object here to get
|
||
|
|
* it linked after the configuration sector.
|
||
|
|
*/
|
||
|
|
# define LDS_BOARD_TEXT \
|
||
|
|
arch/blackfin/lib/built-in.o (.text*); \
|
||
|
|
arch/blackfin/cpu/built-in.o (.text*); \
|
||
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
||
|
|
common/env_embedded.o (.text*);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* I2C Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_I2C
|
||
|
|
#define CONFIG_SYS_I2C_ADI
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Misc Settings
|
||
|
|
*/
|
||
|
|
#define CONFIG_LOADADDR 0x800000
|
||
|
|
#define CONFIG_MISC_INIT_R
|
||
|
|
#define CONFIG_UART_CONSOLE 0
|
||
|
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
#define CONFIG_MTD_DEVICE
|
||
|
|
#define CONFIG_MTD_PARTITIONS
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Pull in common ADI header for remaining command/environment setup
|
||
|
|
*/
|
||
|
|
#include <configs/bfin_adi_common.h>
|
||
|
|
|
||
|
|
/* disable unnecessary features */
|
||
|
|
#undef CONFIG_BOOTM_RTEMS
|
||
|
|
#undef CONFIG_BZIP2
|
||
|
|
#undef CONFIG_KALLSYMS
|
||
|
|
|
||
|
|
#endif
|