forked from rrcarlosr/Jetpack
814 lines
26 KiB
C
814 lines
26 KiB
C
|
/*
|
||
|
|
* Copyright 2013-2014 Freescale Semiconductor, Inc.
|
||
|
|
*
|
||
|
|
* See file CREDITS for list of people who contributed to this
|
||
|
|
* project.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of
|
||
|
|
* the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program; if not, write to the Free Software
|
||
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
|
* MA 02111-1307 USA
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_H
|
||
|
|
#define __CONFIG_H
|
||
|
|
|
||
|
|
/*
|
||
|
|
* T1040 QDS board configuration file
|
||
|
|
*/
|
||
|
|
#define CONFIG_T1040QDS
|
||
|
|
#define CONFIG_PHYS_64BIT
|
||
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
||
|
|
|
||
|
|
#ifdef CONFIG_RAMBOOT_PBL
|
||
|
|
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
|
||
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
|
||
|
|
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
|
||
|
|
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* High Level Configuration Options */
|
||
|
|
#define CONFIG_BOOKE
|
||
|
|
#define CONFIG_E500 /* BOOKE e500 family */
|
||
|
|
#define CONFIG_E500MC /* BOOKE e500mc family */
|
||
|
|
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
|
||
|
|
#define CONFIG_MP /* support multiple processors */
|
||
|
|
|
||
|
|
/* support deep sleep */
|
||
|
|
#define CONFIG_DEEP_SLEEP
|
||
|
|
#if defined(CONFIG_DEEP_SLEEP)
|
||
|
|
#define CONFIG_SILENT_CONSOLE
|
||
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
||
|
|
#define CONFIG_SYS_TEXT_BASE 0xeff40000
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CONFIG_RESET_VECTOR_ADDRESS
|
||
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
|
||
|
|
#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
|
||
|
|
#define CONFIG_FSL_IFC /* Enable IFC Support */
|
||
|
|
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
|
||
|
|
#define CONFIG_PCI /* Enable PCI/PCIE */
|
||
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE
|
||
|
|
#define CONFIG_PCIE1 /* PCIE controller 1 */
|
||
|
|
#define CONFIG_PCIE2 /* PCIE controller 2 */
|
||
|
|
#define CONFIG_PCIE3 /* PCIE controller 3 */
|
||
|
|
#define CONFIG_PCIE4 /* PCIE controller 4 */
|
||
|
|
|
||
|
|
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
|
||
|
|
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
|
||
|
|
|
||
|
|
#define CONFIG_FSL_LAW /* Use common FSL init code */
|
||
|
|
|
||
|
|
#define CONFIG_ENV_OVERWRITE
|
||
|
|
|
||
|
|
#ifdef CONFIG_SYS_NO_FLASH
|
||
|
|
#define CONFIG_ENV_IS_NOWHERE
|
||
|
|
#else
|
||
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
||
|
|
#define CONFIG_SYS_FLASH_CFI
|
||
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
||
|
|
#if defined(CONFIG_SPIFLASH)
|
||
|
|
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||
|
|
#define CONFIG_ENV_SPI_BUS 0
|
||
|
|
#define CONFIG_ENV_SPI_CS 0
|
||
|
|
#define CONFIG_ENV_SPI_MAX_HZ 10000000
|
||
|
|
#define CONFIG_ENV_SPI_MODE 0
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
|
||
|
|
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
||
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||
|
|
#elif defined(CONFIG_SDCARD)
|
||
|
|
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||
|
|
#define CONFIG_ENV_IS_IN_MMC
|
||
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
|
#define CONFIG_ENV_OFFSET (512 * 1658)
|
||
|
|
#elif defined(CONFIG_NAND)
|
||
|
|
#define CONFIG_SYS_EXTRA_ENV_RELOC
|
||
|
|
#define CONFIG_ENV_IS_IN_NAND
|
||
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
||
|
|
#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||
|
|
#else
|
||
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
||
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
||
|
|
#endif
|
||
|
|
#else /* CONFIG_SYS_NO_FLASH */
|
||
|
|
#define CONFIG_ENV_SIZE 0x2000
|
||
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __ASSEMBLY__
|
||
|
|
unsigned long get_board_sys_clk(void);
|
||
|
|
unsigned long get_board_ddr_clk(void);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */
|
||
|
|
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
|
||
|
|
|
||
|
|
/*
|
||
|
|
* These can be toggled for performance analysis, otherwise use default.
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_CACHE_STASHING
|
||
|
|
#define CONFIG_BACKSIDE_L2_CACHE
|
||
|
|
#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
|
||
|
|
#define CONFIG_BTB /* toggle branch predition */
|
||
|
|
#define CONFIG_DDR_ECC
|
||
|
|
#ifdef CONFIG_DDR_ECC
|
||
|
|
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
|
||
|
|
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_ENABLE_36BIT_PHYS
|
||
|
|
|
||
|
|
#define CONFIG_ADDR_MAP
|
||
|
|
#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
|
||
|
|
#define CONFIG_SYS_MEMTEST_END 0x00400000
|
||
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
||
|
|
#define CONFIG_PANIC_HANG /* do not reset board on panic */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Config the L3 Cache as L3 SRAM
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
|
||
|
|
|
||
|
|
#define CONFIG_SYS_DCSRBAR 0xf0000000
|
||
|
|
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
|
||
|
|
|
||
|
|
/* EEPROM */
|
||
|
|
#define CONFIG_ID_EEPROM
|
||
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
||
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
||
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
||
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
||
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
||
|
|
|
||
|
|
/*
|
||
|
|
* DDR Setup
|
||
|
|
*/
|
||
|
|
#define CONFIG_VERY_BIG_RAM
|
||
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
||
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
||
|
|
|
||
|
|
/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
|
||
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
||
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
|
||
|
|
|
||
|
|
#define CONFIG_DDR_SPD
|
||
|
|
#ifndef CONFIG_SYS_FSL_DDR4
|
||
|
|
#define CONFIG_SYS_FSL_DDR3
|
||
|
|
#endif
|
||
|
|
#define CONFIG_FSL_DDR_INTERACTIVE
|
||
|
|
|
||
|
|
#define CONFIG_SYS_SPD_BUS_NUM 0
|
||
|
|
#define SPD_EEPROM_ADDRESS 0x51
|
||
|
|
|
||
|
|
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* IFC Definitions
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_FLASH_BASE 0xe0000000
|
||
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
|
||
|
|
#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
|
||
|
|
+ 0x8000000) | \
|
||
|
|
CSPR_PORT_SIZE_16 | \
|
||
|
|
CSPR_MSEL_NOR | \
|
||
|
|
CSPR_V)
|
||
|
|
#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
|
||
|
|
#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
|
||
|
|
CSPR_PORT_SIZE_16 | \
|
||
|
|
CSPR_MSEL_NOR | \
|
||
|
|
CSPR_V)
|
||
|
|
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TDM Definition
|
||
|
|
*/
|
||
|
|
#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000
|
||
|
|
|
||
|
|
/* NOR Flash Timing Params */
|
||
|
|
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
|
||
|
|
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
|
||
|
|
FTIM0_NOR_TEADC(0x5) | \
|
||
|
|
FTIM0_NOR_TEAHC(0x5))
|
||
|
|
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
|
||
|
|
FTIM1_NOR_TRAD_NOR(0x1A) |\
|
||
|
|
FTIM1_NOR_TSEQRAD_NOR(0x13))
|
||
|
|
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
|
||
|
|
FTIM2_NOR_TCH(0x4) | \
|
||
|
|
FTIM2_NOR_TWPH(0x0E) | \
|
||
|
|
FTIM2_NOR_TWP(0x1c))
|
||
|
|
#define CONFIG_SYS_NOR_FTIM3 0x0
|
||
|
|
|
||
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST
|
||
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
|
||
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
|
||
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||
|
|
|
||
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
|
||
|
|
+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
|
||
|
|
#define CONFIG_FSL_QIXIS /* use common QIXIS code */
|
||
|
|
#define QIXIS_BASE 0xffdf0000
|
||
|
|
#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
|
||
|
|
#define QIXIS_LBMAP_SWITCH 0x06
|
||
|
|
#define QIXIS_LBMAP_MASK 0x0f
|
||
|
|
#define QIXIS_LBMAP_SHIFT 0
|
||
|
|
#define QIXIS_LBMAP_DFLTBANK 0x00
|
||
|
|
#define QIXIS_LBMAP_ALTBANK 0x04
|
||
|
|
#define QIXIS_RST_CTL_RESET 0x31
|
||
|
|
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
|
||
|
|
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
|
||
|
|
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
|
||
|
|
#define QIXIS_RST_FORCE_MEM 0x01
|
||
|
|
|
||
|
|
#define CONFIG_SYS_CSPR3_EXT (0xf)
|
||
|
|
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
|
||
|
|
| CSPR_PORT_SIZE_8 \
|
||
|
|
| CSPR_MSEL_GPCM \
|
||
|
|
| CSPR_V)
|
||
|
|
#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024)
|
||
|
|
#define CONFIG_SYS_CSOR3 0x0
|
||
|
|
/* QIXIS Timing parameters for IFC CS3 */
|
||
|
|
#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
|
||
|
|
FTIM0_GPCM_TEADC(0x0e) | \
|
||
|
|
FTIM0_GPCM_TEAHC(0x0e))
|
||
|
|
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
|
||
|
|
FTIM1_GPCM_TRAD(0x3f))
|
||
|
|
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
|
||
|
|
FTIM2_GPCM_TCH(0x8) | \
|
||
|
|
FTIM2_GPCM_TWP(0x1f))
|
||
|
|
#define CONFIG_SYS_CS3_FTIM3 0x0
|
||
|
|
|
||
|
|
#define CONFIG_NAND_FSL_IFC
|
||
|
|
#define CONFIG_SYS_NAND_BASE 0xff800000
|
||
|
|
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
|
||
|
|
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
||
|
|
| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
|
||
|
|
| CSPR_MSEL_NAND /* MSEL = NAND */ \
|
||
|
|
| CSPR_V)
|
||
|
|
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
||
|
|
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
||
|
|
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
||
|
|
| CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
|
||
|
|
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
|
||
|
|
| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
|
||
|
|
| CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||
|
|
|
||
|
|
/* ONFI NAND Flash mode0 Timing Params */
|
||
|
|
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
|
||
|
|
FTIM0_NAND_TWP(0x18) | \
|
||
|
|
FTIM0_NAND_TWCHT(0x07) | \
|
||
|
|
FTIM0_NAND_TWH(0x0a))
|
||
|
|
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
|
||
|
|
FTIM1_NAND_TWBE(0x39) | \
|
||
|
|
FTIM1_NAND_TRR(0x0e) | \
|
||
|
|
FTIM1_NAND_TRP(0x18))
|
||
|
|
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
|
||
|
|
FTIM2_NAND_TREH(0x0a) | \
|
||
|
|
FTIM2_NAND_TWHRE(0x1e))
|
||
|
|
#define CONFIG_SYS_NAND_FTIM3 0x0
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_DDR_LAW 11
|
||
|
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
||
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
|
#define CONFIG_CMD_NAND
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
||
|
|
|
||
|
|
#if defined(CONFIG_NAND)
|
||
|
|
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
|
||
|
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||
|
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||
|
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||
|
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||
|
|
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
|
||
|
|
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||
|
|
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||
|
|
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||
|
|
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||
|
|
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
|
||
|
|
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||
|
|
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||
|
|
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||
|
|
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||
|
|
#else
|
||
|
|
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
||
|
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||
|
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||
|
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||
|
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||
|
|
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
|
||
|
|
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
|
||
|
|
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
|
||
|
|
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
|
||
|
|
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
|
||
|
|
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
|
||
|
|
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
|
||
|
|
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
|
||
|
|
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
|
||
|
|
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
|
||
|
|
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
|
||
|
|
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
|
||
|
|
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||
|
|
|
||
|
|
#if defined(CONFIG_RAMBOOT_PBL)
|
||
|
|
#define CONFIG_SYS_RAMBOOT
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
||
|
|
#define CONFIG_MISC_INIT_R
|
||
|
|
|
||
|
|
#define CONFIG_HWCONFIG
|
||
|
|
|
||
|
|
/* define to use L1 as initial stack */
|
||
|
|
#define CONFIG_L1_INIT_RAM
|
||
|
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
||
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
|
||
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
|
||
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
|
||
|
|
/* The assembler doesn't like typecast */
|
||
|
|
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
|
||
|
|
((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
|
||
|
|
CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
|
||
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
|
||
|
|
|
||
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
||
|
|
GENERATED_GBL_DATA_SIZE)
|
||
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
||
|
|
|
||
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
||
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
||
|
|
|
||
|
|
/* Serial Port - controlled on board with jumper J8
|
||
|
|
* open - index 2
|
||
|
|
* shorted - index 1
|
||
|
|
*/
|
||
|
|
#define CONFIG_CONS_INDEX 1
|
||
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
||
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||
|
|
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
|
||
|
|
|
||
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||
|
|
|
||
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
|
||
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
|
||
|
|
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
|
||
|
|
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
|
||
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
|
||
|
|
|
||
|
|
/* Video */
|
||
|
|
#define CONFIG_FSL_DIU_FB
|
||
|
|
#ifdef CONFIG_FSL_DIU_FB
|
||
|
|
#define CONFIG_FSL_DIU_CH7301
|
||
|
|
#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000)
|
||
|
|
#define CONFIG_VIDEO
|
||
|
|
#define CONFIG_CMD_BMP
|
||
|
|
#define CONFIG_CFB_CONSOLE
|
||
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
||
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||
|
|
#define CONFIG_VIDEO_LOGO
|
||
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
||
|
|
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
|
||
|
|
/*
|
||
|
|
* With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
|
||
|
|
* disable empty flash sector detection, which is I/O-intensive.
|
||
|
|
*/
|
||
|
|
#undef CONFIG_SYS_FLASH_EMPTY_INFO
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* I2C */
|
||
|
|
#define CONFIG_SYS_I2C
|
||
|
|
#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */
|
||
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */
|
||
|
|
#define CONFIG_SYS_FSL_I2C2_SPEED 50000
|
||
|
|
#define CONFIG_SYS_FSL_I2C3_SPEED 50000
|
||
|
|
#define CONFIG_SYS_FSL_I2C4_SPEED 50000
|
||
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
||
|
|
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
||
|
|
#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F
|
||
|
|
#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F
|
||
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
|
||
|
|
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
|
||
|
|
#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
|
||
|
|
#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
|
||
|
|
|
||
|
|
#define I2C_MUX_PCA_ADDR 0x77
|
||
|
|
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
|
||
|
|
|
||
|
|
/* I2C bus multiplexer */
|
||
|
|
#define I2C_MUX_CH_DEFAULT 0x8
|
||
|
|
#define I2C_MUX_CH_DIU 0xC
|
||
|
|
|
||
|
|
/* LDI/DVI Encoder for display */
|
||
|
|
#define CONFIG_SYS_I2C_LDI_ADDR 0x38
|
||
|
|
#define CONFIG_SYS_I2C_DVI_ADDR 0x75
|
||
|
|
|
||
|
|
/*
|
||
|
|
* RTC configuration
|
||
|
|
*/
|
||
|
|
#define RTC
|
||
|
|
#define CONFIG_RTC_DS3231 1
|
||
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||
|
|
|
||
|
|
/*
|
||
|
|
* eSPI - Enhanced SPI
|
||
|
|
*/
|
||
|
|
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
||
|
|
#define CONFIG_SF_DEFAULT_MODE 0
|
||
|
|
|
||
|
|
/*
|
||
|
|
* General PCI
|
||
|
|
* Memory space is mapped 1-1, but I/O space must start from 0.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef CONFIG_PCI
|
||
|
|
/* controller 1, direct to uli, tgtid 3, Base address 20000 */
|
||
|
|
#ifdef CONFIG_PCIE1
|
||
|
|
#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
|
||
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
|
||
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
|
||
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
|
||
|
|
#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
|
||
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
|
||
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
|
||
|
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* controller 2, Slot 2, tgtid 2, Base address 201000 */
|
||
|
|
#ifdef CONFIG_PCIE2
|
||
|
|
#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000
|
||
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
|
||
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull
|
||
|
|
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
|
||
|
|
#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
|
||
|
|
#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
|
||
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
|
||
|
|
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* controller 3, Slot 1, tgtid 1, Base address 202000 */
|
||
|
|
#ifdef CONFIG_PCIE3
|
||
|
|
#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000
|
||
|
|
#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
|
||
|
|
#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull
|
||
|
|
#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */
|
||
|
|
#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
|
||
|
|
#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
|
||
|
|
#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
|
||
|
|
#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* controller 4, Base address 203000 */
|
||
|
|
#ifdef CONFIG_PCIE4
|
||
|
|
#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000
|
||
|
|
#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
|
||
|
|
#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull
|
||
|
|
#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */
|
||
|
|
#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000
|
||
|
|
#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
|
||
|
|
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
|
||
|
|
#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||
|
|
|
||
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
#endif /* CONFIG_PCI */
|
||
|
|
|
||
|
|
/* SATA */
|
||
|
|
#define CONFIG_FSL_SATA_V2
|
||
|
|
#ifdef CONFIG_FSL_SATA_V2
|
||
|
|
#define CONFIG_LIBATA
|
||
|
|
#define CONFIG_FSL_SATA
|
||
|
|
|
||
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
||
|
|
#define CONFIG_SATA1
|
||
|
|
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
||
|
|
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
||
|
|
#define CONFIG_SATA2
|
||
|
|
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
|
||
|
|
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
||
|
|
|
||
|
|
#define CONFIG_LBA48
|
||
|
|
#define CONFIG_CMD_SATA
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* USB
|
||
|
|
*/
|
||
|
|
#define CONFIG_HAS_FSL_DR_USB
|
||
|
|
|
||
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
||
|
|
#define CONFIG_USB_EHCI
|
||
|
|
|
||
|
|
#ifdef CONFIG_USB_EHCI
|
||
|
|
#define CONFIG_USB_STORAGE
|
||
|
|
#define CONFIG_USB_EHCI_FSL
|
||
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#define CONFIG_MMC
|
||
|
|
|
||
|
|
#ifdef CONFIG_MMC
|
||
|
|
#define CONFIG_FSL_ESDHC
|
||
|
|
#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
|
||
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
|
||
|
|
#define CONFIG_GENERIC_MMC
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Qman/Bman */
|
||
|
|
#ifndef CONFIG_NOBQFMAN
|
||
|
|
#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
|
||
|
|
#define CONFIG_SYS_BMAN_NUM_PORTALS 10
|
||
|
|
#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
|
||
|
|
#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
|
||
|
|
#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
|
||
|
|
#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
|
||
|
|
#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
|
||
|
|
#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
|
||
|
|
#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
|
||
|
|
#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
|
||
|
|
CONFIG_SYS_BMAN_CENA_SIZE)
|
||
|
|
#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
|
||
|
|
#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
|
||
|
|
#define CONFIG_SYS_QMAN_NUM_PORTALS 10
|
||
|
|
#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
|
||
|
|
#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
|
||
|
|
#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
|
||
|
|
#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
|
||
|
|
#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
|
||
|
|
#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
|
||
|
|
#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
|
||
|
|
#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
|
||
|
|
CONFIG_SYS_QMAN_CENA_SIZE)
|
||
|
|
#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
|
||
|
|
#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
|
||
|
|
|
||
|
|
#define CONFIG_SYS_DPAA_FMAN
|
||
|
|
#define CONFIG_SYS_DPAA_PME
|
||
|
|
|
||
|
|
#define CONFIG_QE
|
||
|
|
#define CONFIG_U_QE
|
||
|
|
/* Default address of microcode for the Linux Fman driver */
|
||
|
|
#if defined(CONFIG_SPIFLASH)
|
||
|
|
/*
|
||
|
|
* env is stored at 0x100000, sector size is 0x10000, ucode is stored after
|
||
|
|
* env, so we got 0x110000.
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
|
||
|
|
#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
|
||
|
|
#elif defined(CONFIG_SDCARD)
|
||
|
|
/*
|
||
|
|
* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
|
||
|
|
* about 825KB (1650 blocks), Env is stored after the image, and the env size is
|
||
|
|
* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
|
||
|
|
#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
|
||
|
|
#elif defined(CONFIG_NAND)
|
||
|
|
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
|
||
|
|
#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
|
||
|
|
#else
|
||
|
|
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
|
||
|
|
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
|
||
|
|
#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000
|
||
|
|
#endif
|
||
|
|
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
|
||
|
|
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
|
||
|
|
#endif /* CONFIG_NOBQFMAN */
|
||
|
|
|
||
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
||
|
|
#define CONFIG_FMAN_ENET
|
||
|
|
#define CONFIG_PHYLIB_10G
|
||
|
|
#define CONFIG_PHY_VITESSE
|
||
|
|
#define CONFIG_PHY_REALTEK
|
||
|
|
#define CONFIG_PHY_TERANETICS
|
||
|
|
#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
|
||
|
|
#define SGMII_CARD_PORT2_PHY_ADDR 0x10
|
||
|
|
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
|
||
|
|
#define SGMII_CARD_PORT4_PHY_ADDR 0x11
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef CONFIG_FMAN_ENET
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02
|
||
|
|
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
|
||
|
|
#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
|
||
|
|
|
||
|
|
#define CONFIG_MII /* MII PHY management */
|
||
|
|
#define CONFIG_ETHPRIME "FM1@DTSEC1"
|
||
|
|
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Enable VSC9953 L2 Switch driver */
|
||
|
|
#define CONFIG_VSC9953
|
||
|
|
#define CONFIG_CMD_ETHSW
|
||
|
|
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14
|
||
|
|
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Dynamic MTD Partition support with mtdparts
|
||
|
|
*/
|
||
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
||
|
|
#define CONFIG_MTD_DEVICE
|
||
|
|
#define CONFIG_MTD_PARTITIONS
|
||
|
|
#define CONFIG_CMD_MTDPARTS
|
||
|
|
#define CONFIG_FLASH_CFI_MTD
|
||
|
|
#define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
|
||
|
|
"spi0=spife110000.0"
|
||
|
|
#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
|
||
|
|
"128k(dtb),96m(fs),-(user);"\
|
||
|
|
"fff800000.flash:2m(uboot),9m(kernel),"\
|
||
|
|
"128k(dtb),96m(fs),-(user);spife110000.0:" \
|
||
|
|
"2m(uboot),9m(kernel),128k(dtb),-(user)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Environment
|
||
|
|
*/
|
||
|
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
||
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Command line configuration.
|
||
|
|
*/
|
||
|
|
#define CONFIG_CMD_DATE
|
||
|
|
#define CONFIG_CMD_EEPROM
|
||
|
|
#define CONFIG_CMD_ERRATA
|
||
|
|
#define CONFIG_CMD_IRQ
|
||
|
|
#define CONFIG_CMD_REGINFO
|
||
|
|
|
||
|
|
#ifdef CONFIG_PCI
|
||
|
|
#define CONFIG_CMD_PCI
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* Hash command with SHA acceleration supported in hardware */
|
||
|
|
#ifdef CONFIG_FSL_CAAM
|
||
|
|
#define CONFIG_CMD_HASH
|
||
|
|
#define CONFIG_SHA_HW_ACCEL
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Miscellaneous configurable options
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||
|
|
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
|
||
|
|
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
|
||
|
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||
|
|
#ifdef CONFIG_CMD_KGDB
|
||
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
|
|
#else
|
||
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||
|
|
#endif
|
||
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* For booting Linux, the board info and command line data
|
||
|
|
* have to be in the first 64 MB of memory, since this is
|
||
|
|
* the maximum mapped by the Linux kernel during initialization.
|
||
|
|
*/
|
||
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
|
||
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
||
|
|
|
||
|
|
#ifdef CONFIG_CMD_KGDB
|
||
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Environment Configuration
|
||
|
|
*/
|
||
|
|
#define CONFIG_ROOTPATH "/opt/nfsroot"
|
||
|
|
#define CONFIG_BOOTFILE "uImage"
|
||
|
|
#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
|
||
|
|
|
||
|
|
/* default location for tftp and bootm */
|
||
|
|
#define CONFIG_LOADADDR 1000000
|
||
|
|
|
||
|
|
|
||
|
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
|
||
|
|
#define __USB_PHY_TYPE utmi
|
||
|
|
|
||
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||
|
|
"hwconfig=fsl_ddr:bank_intlv=auto;" \
|
||
|
|
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
|
||
|
|
"netdev=eth0\0" \
|
||
|
|
"video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \
|
||
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
||
|
|
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
|
||
|
|
"tftpflash=tftpboot $loadaddr $uboot && " \
|
||
|
|
"protect off $ubootaddr +$filesize && " \
|
||
|
|
"erase $ubootaddr +$filesize && " \
|
||
|
|
"cp.b $loadaddr $ubootaddr $filesize && " \
|
||
|
|
"protect on $ubootaddr +$filesize && " \
|
||
|
|
"cmp.b $loadaddr $ubootaddr $filesize\0" \
|
||
|
|
"consoledev=ttyS0\0" \
|
||
|
|
"ramdiskaddr=2000000\0" \
|
||
|
|
"ramdiskfile=t1040qds/ramdisk.uboot\0" \
|
||
|
|
"fdtaddr=c00000\0" \
|
||
|
|
"fdtfile=t1040qds/t1040qds.dtb\0" \
|
||
|
|
"bdev=sda3\0"
|
||
|
|
|
||
|
|
#define CONFIG_LINUX \
|
||
|
|
"setenv bootargs root=/dev/ram rw " \
|
||
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
||
|
|
"setenv ramdiskaddr 0x02000000;" \
|
||
|
|
"setenv fdtaddr 0x00c00000;" \
|
||
|
|
"setenv loadaddr 0x1000000;" \
|
||
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||
|
|
|
||
|
|
#define CONFIG_HDBOOT \
|
||
|
|
"setenv bootargs root=/dev/$bdev rw " \
|
||
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
||
|
|
"tftp $loadaddr $bootfile;" \
|
||
|
|
"tftp $fdtaddr $fdtfile;" \
|
||
|
|
"bootm $loadaddr - $fdtaddr"
|
||
|
|
|
||
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
||
|
|
"setenv bootargs root=/dev/nfs rw " \
|
||
|
|
"nfsroot=$serverip:$rootpath " \
|
||
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
||
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
||
|
|
"tftp $loadaddr $bootfile;" \
|
||
|
|
"tftp $fdtaddr $fdtfile;" \
|
||
|
|
"bootm $loadaddr - $fdtaddr"
|
||
|
|
|
||
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
||
|
|
"setenv bootargs root=/dev/ram rw " \
|
||
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
||
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
||
|
|
"tftp $loadaddr $bootfile;" \
|
||
|
|
"tftp $fdtaddr $fdtfile;" \
|
||
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
||
|
|
|
||
|
|
#define CONFIG_BOOTCOMMAND CONFIG_LINUX
|
||
|
|
|
||
|
|
#include <asm/fsl_secure_boot.h>
|
||
|
|
|
||
|
|
#endif /* __CONFIG_H */
|