dchvs
/
Jetpack
forked from rrcarlosr/Jetpack
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Jetpack/kernel/nvidia/drivers/misc/nct1008.c

1606 lines
43 KiB
C
Raw Permalink Normal View History

cti_kernel: Add CTI sources Elroy L4T r32.4.4 – JetPack 4.4.1
2021-01-25 18:30:10 -04:00
/*
* drivers/misc/nct1008.c
*
* Driver for NCT1008, temperature monitoring device from ON Semiconductors
*
* Copyright (c) 2010-2018, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/nct1008.h>
#include <linux/delay.h>
#include <linux/thermal.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
#include <linux/version.h>
#include <soc/tegra/fuse.h>
#include <dt-bindings/misc/nvidia,nct1008.h>
/* Register Addresses used in this module. */
#define LOC_TEMP_RD 0x00
#define EXT_TEMP_HI_RD 0x01
#define STATUS_RD 0x02
#define CONFIG_RD 0x03
#define CONV_RATE_RD 0x04
#define LOC_TEMP_HI_LIMIT_RD 0x05
#define LOC_TEMP_LO_LIMIT_RD 0x06
#define EXT_TEMP_HI_LIMIT_HI_BYTE_RD 0x07
#define EXT_TEMP_LO_LIMIT_HI_BYTE_RD 0x08
#define CONFIG_WR 0x09
#define CONV_RATE_WR 0x0A
#define LOC_TEMP_HI_LIMIT_WR 0x0B
#define LOC_TEMP_LO_LIMIT_WR 0x0C
#define EXT_TEMP_HI_LIMIT_HI_BYTE_WR 0x0D
#define EXT_TEMP_LO_LIMIT_HI_BYTE_WR 0x0E
#define ONE_SHOT 0x0F
#define EXT_TEMP_LO_RD 0x10
#define OFFSET_WR 0x11
#define OFFSET_QUARTER_WR 0x12
#define EXT_TEMP_HI_LIMIT_LO_BYTE 0x13
#define EXT_TEMP_LO_LIMIT_LO_BYTE 0x14
/* NOT USED 0x15 */
/* NOT USED 0x16 */
/* NOT USED 0x17 */
/* NOT USED 0x18 */
#define EXT_THERM_LIMIT_WR 0x19
/* NOT USED 0x1A */
/* NOT USED 0x1B */
/* NOT USED 0x1C */
/* NOT USED 0x1D */
/* NOT USED 0x1E */
/* NOT USED 0x1F */
#define LOC_THERM_LIMIT 0x20
#define THERM_HYSTERESIS 0x21
#define COSECUTIVE_ALERT 0x22
#define NFACTOR_CORRECTION 0x23
#define MANUFACTURER_ID 0xFE
#define MAX6649_LOC_TEMP_LO_RD 0x11
/* Tdiode Offset fuse is stored in usigned Q5.2 Fixed Point format */
#define CP_INT (5)
#define CP_FRAC (2)
#define MASK_CP1 (0x7F)
#define SHIFT_CP1 (0)
#define SHIFT_CP2 (14)
#define MASK_CP2 (0x7F << SHIFT_CP2)
#define FIXED_TO_MILLI_C(val, cp) \
(((((val) & MASK_##cp) >> SHIFT_##cp) * 1000) / (1 << CP_FRAC))
#define OFFSET_FRAC_BITS (4)
#define OFFSET_FRAC_MULT (1 << OFFSET_FRAC_BITS)
#define OFFSET_FRAC_MASK (0xf)
/* Temperatures at which offsets are captured in K*/
#define TC1 (25000)
#define TC2 (105000)
#define TK1 (273150 + TC1)
#define TK2 (273150 + TC2)
/*
* optimized nfactor for an ideal TMP451 sensor specified in datasheet is
* 1.008, but since it changes in increments of 1/2088 steps we need 5 fraction
* bits to maintain precision and hence is multipled by 10^5.
*/
#define TMP451_NFACTOR (100800)
/* step size in which nfactor can increment is 1/2088 specified in datasheet */
#define TMP451_NFACTOR_STEP (2088)
/* Configuration register bits. */
#define EXTENDED_RANGE_BIT BIT(2)
#define THERM2_BIT BIT(5)
#define STANDBY_BIT BIT(6)
#define ALERT_BIT BIT(7)
/* Status register trip point bits. */
#define EXT_LO_BIT BIT(3) /* External Sensor has tripped 'temp <= LOW' */
#define EXT_HI_BIT BIT(4) /* External Sensor has tripped 'temp > HIGH' */
#define LOC_LO_BIT BIT(5) /* Local Sensor has tripped 'temp <= LOW' */
#define LOC_HI_BIT BIT(6) /* Local Sensor has tripped 'temp > HIGH' */
/* Constants. */
#define EXTENDED_RANGE_OFFSET 64U
#define STANDARD_RANGE_MAX 127U
#define EXTENDED_RANGE_MAX (150U + EXTENDED_RANGE_OFFSET)
#define NCT1008_MIN_TEMP (-64L)
#define NCT1008_MAX_TEMP 191L
#define NCT1008_MAX_TEMP_MILLI 191750
#define MAX_STR_PRINT 50
#define NCT_CONV_TIME_ONESHOT_US 52000
#define TMP451_CONV_TIME_ONESHOT_US 31000
#define CELSIUS_TO_MILLICELSIUS(x) ((x)*1000)
#define MILLICELSIUS_TO_CELSIUS(x) ((x)/1000)
#define LOC TEGRA_NCT_SENSOR_LOC
#define EXT TEGRA_NCT_SENSOR_EXT
#define CNT TEGRA_NCT_SENSOR_MAX
struct nct1008_sensor_data {
struct thermal_zone_device *thz;
long current_hi_limit;
long current_lo_limit;
int shutdown_limit;
int temp;
};
struct nct1008_data {
struct workqueue_struct *workqueue;
struct work_struct work;
struct i2c_client *client;
struct nct1008_platform_data plat_data;
struct mutex mutex;
u8 config;
enum nct1008_chip chip;
char chip_name[I2C_NAME_SIZE];
struct regulator *nct_reg;
int oneshot_conv_period_ns;
int nct_disabled;
int stop_workqueue;
struct nct1008_sensor_data sensors[CNT];
};
static const unsigned long THERM_WARN_RANGE_HIGH_OFFSET = 3000;
static unsigned long nct1008_shutdown_warning_cur_state;
static long shutdown_warn_saved_temp;
static inline s16 value_to_temperature(bool extended, u8 value)
{
return extended ? (s16)(value - EXTENDED_RANGE_OFFSET) : (s16)value;
}
static inline u8 temperature_to_value(bool extended, s16 temp)
{
return extended ? (u8)(temp + EXTENDED_RANGE_OFFSET) : (u8)temp;
}
static int nct1008_write_reg(struct nct1008_data *data, u8 reg, u16 value)
{
int ret = -ENODEV;
if (!data)
return ret;
mutex_lock(&data->mutex);
if (data->nct_disabled) {
mutex_unlock(&data->mutex);
goto err;
}
ret = i2c_smbus_write_byte_data(data->client, reg, value);
mutex_unlock(&data->mutex);
err:
if (ret < 0)
dev_err(&data->client->dev, "write reg err %d\n", ret);
return ret;
}
static int nct1008_read_reg(struct nct1008_data *data, u8 reg)
{
int ret = -ENODEV;
if (!data)
return ret;
mutex_lock(&data->mutex);
if (data->nct_disabled) {
mutex_unlock(&data->mutex);
goto err;
}
ret = i2c_smbus_read_byte_data(data->client, reg);
mutex_unlock(&data->mutex);
err:
if (ret < 0)
dev_err(&data->client->dev, "read reg err %d\n", ret);
return ret;
}
static int nct1008_get_temp_common(int sensor, struct nct1008_data *data,
int *temp)
{
struct nct1008_platform_data *pdata = &data->plat_data;
s16 temp_hi;
s16 temp_lo = 0;
long temp_milli = 0;
u8 value;
int ret;
if (!((sensor == EXT) || (sensor == LOC)))
return -1;
/* Read External Temp */
if (sensor == EXT) {
ret = nct1008_read_reg(data, EXT_TEMP_LO_RD);
if (ret < 0)
return -1;
else
value = ret;
temp_lo = (value >> 6);
ret = nct1008_read_reg(data, EXT_TEMP_HI_RD);
if (ret < 0)
return -1;
else
value = ret;
temp_hi = value_to_temperature(pdata->extended_range, value);
temp_milli = CELSIUS_TO_MILLICELSIUS(temp_hi) + temp_lo * 250;
} else if (sensor == LOC) {
ret = nct1008_read_reg(data, LOC_TEMP_RD);
if (ret < 0)
return -1;
else
value = ret;
temp_hi = value_to_temperature(pdata->extended_range, value);
if (data->chip == MAX6649)
{
ret = nct1008_read_reg(data, MAX6649_LOC_TEMP_LO_RD);
if(ret < 0)
return -1;
else
value = ret;
temp_lo = (value >> 6);
}
temp_milli = CELSIUS_TO_MILLICELSIUS(temp_hi) + temp_lo * 250;
}
if (temp_milli > NCT1008_MAX_TEMP_MILLI)
return -1;
*temp = temp_milli;
data->sensors[sensor].temp = temp_milli;
return 0;
}
static ssize_t nct1008_show_temp(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
struct nct1008_platform_data *pdata = &data->plat_data;
s16 temp1 = 0;
s16 temp = 0;
u8 temp2 = 0;
int value = 0;
if (!dev || !buf || !attr)
return -EINVAL;
value = nct1008_read_reg(data, LOC_TEMP_RD);
if (value < 0)
goto error;
temp1 = value_to_temperature(pdata->extended_range, value);
if(data->chip == MAX6649)
{
value = nct1008_read_reg(data, MAX6649_LOC_TEMP_LO_RD);
if(value < 0)
goto error;
temp2 = (value >> 6);
return snprintf(buf, MAX_STR_PRINT, "%d.%d\n",
temp1, temp2 * 25);
}
value = nct1008_read_reg(data, EXT_TEMP_LO_RD);
if (value < 0)
goto error;
temp2 = (value >> 6);
value = nct1008_read_reg(data, EXT_TEMP_HI_RD);
if (value < 0)
goto error;
temp = value_to_temperature(pdata->extended_range, value);
return snprintf(buf, MAX_STR_PRINT, "%d %d.%d\n",
temp1, temp, temp2 * 25);
error:
return snprintf(buf, MAX_STR_PRINT,
"Error read local/ext temperature\n");
}
static ssize_t nct1008_show_temp_overheat(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
struct nct1008_platform_data *pdata = &data->plat_data;
int value;
s16 temp, temp2;
/* Local temperature h/w shutdown limit */
value = nct1008_read_reg(data, LOC_THERM_LIMIT);
if (value < 0)
goto error;
temp = value_to_temperature(pdata->extended_range, value);
/* External temperature h/w shutdown limit */
value = nct1008_read_reg(data, EXT_THERM_LIMIT_WR);
if (value < 0)
goto error;
temp2 = value_to_temperature(pdata->extended_range, value);
return snprintf(buf, MAX_STR_PRINT, "%d %d\n", temp, temp2);
error:
return snprintf(buf, MAX_STR_PRINT, " Rd overheat Error\n");
}
static ssize_t nct1008_set_temp_overheat(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int num;
int err;
int temp;
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
if (kstrtoint(buf, 0, &num))
return -EINVAL;
if ((num < NCT1008_MIN_TEMP) || (num >= NCT1008_MAX_TEMP)) {
dev_err(dev, "Out of bounds temperature limit\n");
return -EINVAL;
}
/* check for system power down */
err = nct1008_get_temp_common(EXT, data, &temp);
if (err)
goto error;
temp = MILLICELSIUS_TO_CELSIUS(temp);
if (temp >= num)
dev_warn(dev, "new overheat temp=%d exceeds curr temp=%dn\n",
num, temp);
/* External temperature h/w shutdown limit */
temp = temperature_to_value(data->plat_data.extended_range, (s16)num);
err = nct1008_write_reg(data, EXT_THERM_LIMIT_WR, temp);
if (err < 0)
goto error;
/* Local temperature h/w shutdown limit */
temp = temperature_to_value(data->plat_data.extended_range, (s16)num);
err = nct1008_write_reg(data, LOC_THERM_LIMIT, temp);
if (err < 0)
goto error;
data->sensors[EXT].shutdown_limit = num;
return count;
error:
dev_err(dev, "failed to set temperature-overheat\n");
return err;
}
static ssize_t nct1008_show_temp_alert(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
struct nct1008_platform_data *pdata = &data->plat_data;
int value;
s16 temp_hi, temp_lo;
/* External Temperature Throttling hi-limit */
value = nct1008_read_reg(data, EXT_TEMP_HI_LIMIT_HI_BYTE_RD);
if (value < 0)
goto error;
temp_hi = value_to_temperature(pdata->extended_range, value);
/* External Temperature Throttling lo-limit */
value = nct1008_read_reg(data, EXT_TEMP_LO_LIMIT_HI_BYTE_RD);
if (value < 0)
goto error;
temp_lo = value_to_temperature(pdata->extended_range, value);
return snprintf(buf, MAX_STR_PRINT, "lo:%d hi:%d\n", temp_lo, temp_hi);
error:
dev_err(dev, "%s: failed to read temperature-alert\n", __func__);
return snprintf(buf, MAX_STR_PRINT, " Rd alert Error\n");
}
static ssize_t nct1008_set_temp_alert(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int val;
int err;
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
struct nct1008_platform_data *pdata = &data->plat_data;
if (kstrtoint(buf, 0, &val))
return -EINVAL;
if ((val < NCT1008_MIN_TEMP) || (val >= NCT1008_MAX_TEMP)) {
dev_err(dev, "Out of bounds temperature limit\n");
return -EINVAL;
}
/* External Temperature Throttling limit */
val = temperature_to_value(pdata->extended_range, (s16)val);
err = nct1008_write_reg(data, EXT_TEMP_HI_LIMIT_HI_BYTE_WR, val);
if (err < 0)
goto error;
/* Local Temperature Throttling limit */
err = nct1008_write_reg(data, LOC_TEMP_HI_LIMIT_WR, val);
if (err < 0)
goto error;
return count;
error:
dev_err(dev, "%s: failed to set temperature-alert\n", __func__);
return err;
}
static ssize_t nct1008_show_ext_temp(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
struct nct1008_platform_data *pdata = &data->plat_data;
s16 temp_value;
int val = 0;
int data_lo;
if (!dev || !buf || !attr)
return -EINVAL;
/* When reading the full external temperature value, read the
* LSB first. This causes the MSB to be locked (that is, the
* ADC does not write to it) until it is read */
data_lo = nct1008_read_reg(data, EXT_TEMP_LO_RD);
if (data_lo < 0)
goto error;
val = nct1008_read_reg(data, EXT_TEMP_HI_RD);
if (val < 0)
goto error;
temp_value = value_to_temperature(pdata->extended_range, val);
return snprintf(buf, MAX_STR_PRINT, "%d.%d\n", temp_value,
(25 * (data_lo >> 6)));
error:
return snprintf(buf, MAX_STR_PRINT, "Error read ext temperature\n");
}
static ssize_t pr_reg(struct nct1008_data *nct, char *buf, int max_s,
const char *reg_name, int offset)
{
int ret, sz = 0;
ret = nct1008_read_reg(nct, offset);
if (ret >= 0)
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"%20s 0x%02x 0x%02x 0x%02x\n",
reg_name, nct->client->addr, offset, ret);
else
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"%s: line=%d, i2c ** read error=%d **\n",
__func__, __LINE__, ret);
return sz;
}
static ssize_t nct1008_show_regs(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *nct = i2c_get_clientdata(client);
int sz = 0;
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"%s Registers\n", nct->chip_name);
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"---------------------------------------\n");
sz += snprintf(buf + sz, PAGE_SIZE - sz, "%20s %4s %4s %s\n",
"Register Name ", "Addr", "Reg", "Value");
sz += snprintf(buf + sz, PAGE_SIZE - sz, "%20s %4s %4s %s\n",
"--------------------", "----", "----", "-----");
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Status ", STATUS_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Configuration ", CONFIG_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Conversion Rate ", CONV_RATE_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Hysteresis ", THERM_HYSTERESIS);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Consecutive Alert ", COSECUTIVE_ALERT);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Local Temp Value ", LOC_TEMP_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Local Temp Hi Limit ", LOC_TEMP_HI_LIMIT_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Local Temp Lo Limit ", LOC_TEMP_LO_LIMIT_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Local Therm Limit ", LOC_THERM_LIMIT);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Value Hi ", EXT_TEMP_HI_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Value Lo ", EXT_TEMP_LO_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Hi Limit Hi", EXT_TEMP_HI_LIMIT_HI_BYTE_RD);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Lo Limit Hi", EXT_TEMP_LO_LIMIT_HI_BYTE_RD);
if(nct->chip == MAX6649) {
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Local Temp Value lo ", MAX6649_LOC_TEMP_LO_RD);
}
else {
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Offset Hi ", OFFSET_WR);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Offset Lo ", OFFSET_QUARTER_WR);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Hi Limit Lo", EXT_TEMP_HI_LIMIT_LO_BYTE);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Temp Lo Limit Lo", EXT_TEMP_LO_LIMIT_LO_BYTE);
}
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"Ext Therm Limit ", EXT_THERM_LIMIT_WR);
sz += pr_reg(nct, buf+sz, PAGE_SIZE-sz,
"ManufacturerID ", MANUFACTURER_ID);
return sz;
}
static ssize_t nct1008_set_nadjust(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
int r, nadj;
sscanf(buf, "%d", &nadj);
r = nct1008_write_reg(data, NFACTOR_CORRECTION, nadj);
if (r)
return r;
return count;
}
static ssize_t nct1008_show_nadjust(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
int nadj, nf, sz = 0;
nadj = nct1008_read_reg(data, NFACTOR_CORRECTION);
nf = (TMP451_NFACTOR * TMP451_NFACTOR_STEP) /
(TMP451_NFACTOR_STEP + nadj);
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"nadj: %d, nf: %d\n", nadj, nf);
return sz;
}
static ssize_t nct1008_set_offset(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
int r = count, hi_b, lo_b;
sscanf(buf, "%d %d", &hi_b, &lo_b);
r = nct1008_write_reg(data, OFFSET_WR, hi_b);
r = r ? r : nct1008_write_reg(data, OFFSET_QUARTER_WR, lo_b << 4);
if (r)
return r;
return count;
}
static ssize_t nct1008_show_offset(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct nct1008_data *data = i2c_get_clientdata(client);
int hi_b, lo_b, sz = 0;
hi_b = nct1008_read_reg(data, OFFSET_WR);
lo_b = nct1008_read_reg(data, OFFSET_QUARTER_WR);
sz += snprintf(buf + sz, PAGE_SIZE - sz,
"offset: %d, %d\n", hi_b, lo_b);
return sz;
}
static DEVICE_ATTR(temperature, S_IRUGO, nct1008_show_temp, NULL);
static DEVICE_ATTR(temperature_overheat, (S_IRUGO | (S_IWUSR | S_IWGRP)),
nct1008_show_temp_overheat, nct1008_set_temp_overheat);
static DEVICE_ATTR(temperature_alert, (S_IRUGO | (S_IWUSR | S_IWGRP)),
nct1008_show_temp_alert, nct1008_set_temp_alert);
static DEVICE_ATTR(ext_temperature, S_IRUGO, nct1008_show_ext_temp, NULL);
static DEVICE_ATTR(registers, S_IRUGO, nct1008_show_regs, NULL);
static DEVICE_ATTR(offset, (S_IRUGO | (S_IWUSR | S_IWGRP)),
nct1008_show_offset, nct1008_set_offset);
static DEVICE_ATTR(nadj, (S_IRUGO | (S_IWUSR | S_IWGRP)),
nct1008_show_nadjust, nct1008_set_nadjust);
static struct attribute *nct1008_attributes[] = {
&dev_attr_temperature.attr,
&dev_attr_temperature_overheat.attr,
&dev_attr_temperature_alert.attr,
&dev_attr_ext_temperature.attr,
&dev_attr_registers.attr,
&dev_attr_offset.attr,
&dev_attr_nadj.attr,
NULL
};
static const struct attribute_group nct1008_attr_group = {
.attrs = nct1008_attributes,
};
static int nct1008_shutdown_warning_get_max_state(
struct thermal_cooling_device *cdev,
unsigned long *max_state)
{
/* A state for every 250mC */
*max_state = THERM_WARN_RANGE_HIGH_OFFSET / 250;
return 0;
}
static int nct1008_shutdown_warning_get_cur_state(
struct thermal_cooling_device *cdev,
unsigned long *cur_state)
{
struct nct1008_data *data = cdev->devdata;
long limit = data->sensors[EXT].shutdown_limit * 1000;
int temp;
if (nct1008_get_temp_common(EXT, data, &temp))
return -1;
if (temp >= (limit - THERM_WARN_RANGE_HIGH_OFFSET))
*cur_state = nct1008_shutdown_warning_cur_state;
else
*cur_state = 0;
return 0;
}
static int nct1008_shutdown_warning_set_cur_state(
struct thermal_cooling_device *cdev,
unsigned long cur_state)
{
struct nct1008_data *data = cdev->devdata;
long limit = data->sensors[EXT].shutdown_limit * 1000;
int temp;
if (nct1008_get_temp_common(EXT, data, &temp))
return -1;
else if (temp < 0)
goto ret;
if ((temp >= (limit - THERM_WARN_RANGE_HIGH_OFFSET)) &&
(temp != shutdown_warn_saved_temp)) {
pr_warn("%s: Warning: chip temperature (%d.%02dC) is %s SHUTDOWN limit (%c%ldC).\n",
data->chip_name,
temp / 1000, (temp % 1000) / 10,
temp > limit ? "above" :
temp == limit ? "at" : "near",
temp > limit ? '>' : '<', limit / 1000);
shutdown_warn_saved_temp = temp;
}
ret:
nct1008_shutdown_warning_cur_state = cur_state;
return 0;
}
static struct thermal_cooling_device_ops nct1008_shutdown_warning_ops = {
.get_max_state = nct1008_shutdown_warning_get_max_state,
.get_cur_state = nct1008_shutdown_warning_get_cur_state,
.set_cur_state = nct1008_shutdown_warning_set_cur_state,
};
static int nct1008_thermal_set_limits(int sensor,
struct nct1008_data *data,
long lo_limit_mC,
long hi_limit_mC)
{
int err;
u8 value;
struct i2c_client *client = data->client;
bool extended_range = data->plat_data.extended_range;
long lo_limit;
long hi_limit;
u8 reg;
lo_limit = max(NCT1008_MIN_TEMP, MILLICELSIUS_TO_CELSIUS(lo_limit_mC));
hi_limit = min(NCT1008_MAX_TEMP, MILLICELSIUS_TO_CELSIUS(hi_limit_mC));
if (lo_limit >= hi_limit)
return -EINVAL;
if (data->sensors[sensor].current_lo_limit != lo_limit) {
value = temperature_to_value(extended_range, lo_limit);
reg = (sensor == LOC) ? LOC_TEMP_LO_LIMIT_WR :
EXT_TEMP_LO_LIMIT_HI_BYTE_WR;
err = nct1008_write_reg(data, reg, value);
if (err)
return err;
data->sensors[sensor].current_lo_limit = lo_limit;
}
if (data->sensors[sensor].current_hi_limit != hi_limit) {
value = temperature_to_value(extended_range, hi_limit);
reg = (sensor == LOC) ? LOC_TEMP_HI_LIMIT_WR :
EXT_TEMP_HI_LIMIT_HI_BYTE_WR;
err = nct1008_write_reg(data, reg, value);
if (err)
return err;
data->sensors[sensor].current_hi_limit = hi_limit;
}
dev_dbg(&client->dev, "limits set to lo:%ld hi:%ld\n", lo_limit,
hi_limit);
return 0;
}
static int nct1008_ext_get_temp_as_sensor(void *data, int *temp)
{
return nct1008_get_temp_common(EXT, (struct nct1008_data *) data, temp);
}
static int nct1008_get_trend_as_sensor(int sensor, void *data, int trip,
enum thermal_trend *trend)
{
int ret, temp, trip_temp, last_temp;
struct nct1008_data *nct_data = (struct nct1008_data *)data;
struct thermal_zone_device *thz = nct_data->sensors[sensor].thz;
*trend = THERMAL_TREND_STABLE;
if (!thz)
return 0;
ret = thz->ops->get_trip_temp(thz, trip, &trip_temp);
if (ret)
return ret;
mutex_lock(&thz->lock);
temp = thz->temperature;
last_temp = thz->last_temperature;
mutex_unlock(&thz->lock);
if (temp > trip_temp) {
if (temp >= last_temp)
*trend = THERMAL_TREND_RAISING;
else
*trend = THERMAL_TREND_STABLE;
} else if (temp < trip_temp) {
*trend = THERMAL_TREND_DROPPING;
} else {
*trend = THERMAL_TREND_STABLE;
}
return 0;
}
/* Helper function to get trend for the local sensor. */
static inline int nct1008_loc_get_trend_as_sensor(void *data, int trip,
enum thermal_trend *trend)
{
return nct1008_get_trend_as_sensor(LOC, data, trip, trend);
}
static inline int nct1008_ext_get_trend_as_sensor(void *data, int trip,
enum thermal_trend *trend)
{
return nct1008_get_trend_as_sensor(EXT, data, trip, trend);
}
static int nct1008_loc_get_temp_as_sensor(void *data, int *temp)
{
return nct1008_get_temp_common(LOC, (struct nct1008_data *) data, temp);
}
static int nct1008_loc_set_trips(void *of_data, int low, int high)
{
struct nct1008_data *data = (struct nct1008_data *)of_data;
nct1008_thermal_set_limits(LOC, data, low, high);
return 0;
}
static int nct1008_ext_set_trips(void *of_data, int low, int high)
{
struct nct1008_data *data = (struct nct1008_data *)of_data;
nct1008_thermal_set_limits(EXT, data, low, high);
return 0;
}
static int nct1008_enable(struct i2c_client *client)
{
struct nct1008_data *data = i2c_get_clientdata(client);
return nct1008_write_reg(data, CONFIG_WR, data->config);
}
static int nct1008_disable(struct i2c_client *client)
{
struct nct1008_data *data = i2c_get_clientdata(client);
return nct1008_write_reg(data, CONFIG_WR, data->config | STANDBY_BIT);
}
static void nct1008_work_func(struct work_struct *work)
{
struct nct1008_data *data = container_of(work, struct nct1008_data,
work);
struct i2c_client *client = data->client;
int err;
int st;
mutex_lock(&data->mutex);
if (data->stop_workqueue) {
mutex_unlock(&data->mutex);
return;
}
mutex_unlock(&data->mutex);
err = nct1008_disable(data->client);
if (err == -ENODEV)
return;
st = nct1008_read_reg(data, STATUS_RD);
dev_dbg(&client->dev, "%s: interrupt (0x%08x)\n", data->chip_name, st);
if ((st & (LOC_LO_BIT | LOC_HI_BIT)) && data->sensors[LOC].thz)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0)
thermal_zone_device_update(data->sensors[LOC].thz,
THERMAL_EVENT_UNSPECIFIED);
#else
thermal_zone_device_update(data->sensors[LOC].thz);
#endif
if ((st & (EXT_LO_BIT | EXT_HI_BIT)) && data->sensors[EXT].thz)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0)
thermal_zone_device_update(data->sensors[EXT].thz,
THERMAL_EVENT_UNSPECIFIED);
#else
thermal_zone_device_update(data->sensors[EXT].thz);
#endif
/* Initiate one-shot conversion */
err = nct1008_write_reg(data, ONE_SHOT, 0x1);
if (err < 0)
return;
/* Give hardware necessary time to finish conversion */
usleep_range(data->oneshot_conv_period_ns,
data->oneshot_conv_period_ns + 1000);
err = nct1008_read_reg(data, STATUS_RD);
if (err < 0)
return;
nct1008_enable(data->client);
enable_irq(data->client->irq);
}
static irqreturn_t nct1008_irq(int irq, void *dev_id)
{
struct nct1008_data *data = dev_id;
disable_irq_nosync(irq);
queue_work(data->workqueue, &data->work);
return IRQ_HANDLED;
}
static void nct1008_power_control(struct nct1008_data *data, bool is_enable)
{
int ret;
mutex_lock(&data->mutex);
if (!data->nct_reg) {
mutex_unlock(&data->mutex);
return;
}
if (is_enable)
ret = regulator_enable(data->nct_reg);
else
ret = regulator_disable(data->nct_reg);
if (ret < 0)
dev_err(&data->client->dev, "Error in %s %s VDD rail, "
"error %d\n", (is_enable) ? "enabling" : "disabling",
data->chip_name,
ret);
else
dev_info(&data->client->dev, "success in %s %s VDD rail\n",
(is_enable) ? "enabling" : "disabling",
data->chip_name);
data->nct_disabled = !is_enable;
mutex_unlock(&data->mutex);
}
/*
* CP2 = Tdiode - Tchuck at 105C in Q5.2 format
* CP1 = Tdiode - Tchuck at 25C in Q5.2 format
* TC1, TC2 are true physical temperatures 25C & 105C.
* Treported2 = TC2 + CP2
* to account for part to part variation use alpha beta and apply
* linear correction to the actual temperature
* Tr2 = alpha * (TC2 + CP2) + beta
* Terr = Treported - Tphysical
* Terr @ TC2 = TE2 = Tr2 - TC2
* Terr @ TC1 = TE1 = Tr1 - TC1
* slope = (TE2 - TE1)/(TC2 - TC1)
* = alpha * ((cp2 - cp1)/(TC2 - T1)) + alpha - 1
*
* per TMP451 datasheet:
* Terr = (nf - 1.008)/1.008 * Tk
* So, Terr_slope = (nf - 1.008)/1.008 ...(1)
*
* Emperically TMP451 reports higher temperature when nFactor is reduced. This
* means the Terr in (2) is negative and is being subtracted when the sensor
* overestimates the temperature. Slope therefore has to be negative:
* slope = - alpha * ((cp2 - cp1)/(TC2 - T1)) - alpha + 1...(2)
*
* solving for nf from (1) & (2):
* nf = -(1.008 * slope) + 1.008 ...(4)
*
* quantize and map nf to an signed int using the nfactor step size
* nadj = (1.008 * 2088 / nFactor) - 2088
*
* After applying the nFactor and Offset, Tdiode's reported temperature should
* be closer to the physical temperature. The adjusted temp is calculated as:
* Tadjusted = Offset - slope * Tk + Treported
* Assuming adjusted temp same as physical temp, calculate offset @ T2:
* Offset = Tadjusted - Treported + slope * Tk
* = Tphysical - Treported + slope * Tk
* = -TE2 + slope * TK2
* = -alpha * (TC2 + CP2) - beta + TC2 + slope * TK1
*/
static int nct1008_offsets_program(struct nct1008_data *data)
{
struct i2c_client *client = data->client;
struct nct1008_platform_data *p = &data->plat_data;
/* use DT based offset unless fuse_offset is present */
int64_t off = p->offset, slope, nf = 0, nadj = 0, cp2, cp1;
int r = 0, val, lo_b, hi_b;
if (p->fuse_offset) {
r = tegra_fuse_readl(FUSE_TDIODE_CALIB, &val);
if (r)
return r;
cp2 = FIXED_TO_MILLI_C(val, CP2);
cp1 = FIXED_TO_MILLI_C(val, CP1);
/*
* alpha and beta have 4 fraction digits and is scaled by 10^4.
* nf is therefore scaled back by 10^4 in the end.
*/
slope = ((p->alpha * (cp2 - cp1)) / (TC2 - TC1)) + p->alpha -
10000;
nf = -((TMP451_NFACTOR * slope) / 10000) + TMP451_NFACTOR;
nadj = (TMP451_NFACTOR * TMP451_NFACTOR_STEP / nf) -
TMP451_NFACTOR_STEP;
off = -p->alpha * (TC2 + cp2) - p->beta * 1000 + TC2 * 10000 -
slope * TK2;
off = off * OFFSET_FRAC_MULT / 10000000;
r = nct1008_write_reg(data, NFACTOR_CORRECTION, nadj);
dev_info(&client->dev,
"nf:%lld, nadj:%lld, off:%lld\n", nf, nadj, off);
}
lo_b = ((off & OFFSET_FRAC_MASK) << OFFSET_FRAC_BITS);
hi_b = off >> OFFSET_FRAC_BITS;
dev_info(&client->dev, "hi_b:%d, lo_b:%d\n", hi_b, lo_b);
r = r ? r : nct1008_write_reg(data, OFFSET_WR, hi_b);
r = r ? r : nct1008_write_reg(data, OFFSET_QUARTER_WR, lo_b);
return r;
}
static int nct1008_ext_sensor_init(struct nct1008_data *data)
{
int ret, val;
struct nct1008_platform_data *pdata = &data->plat_data;
ret = nct1008_read_reg(data, STATUS_RD);
if (ret & BIT(2)) {
/* skip configuration of EXT sensor */
dev_err(&data->client->dev, "EXT sensor circuit is open\n");
return -ENODEV;
}
/* External temperature h/w shutdown limit. */
if (data->sensors[EXT].shutdown_limit != INT_MIN) {
val = temperature_to_value(pdata->extended_range,
data->sensors[EXT].shutdown_limit);
ret = nct1008_write_reg(data, EXT_THERM_LIMIT_WR, val);
if (ret)
goto err;
dev_info(&data->client->dev, "EXT shutdown limit %d",
data->sensors[EXT].shutdown_limit);
}
/* Setup external hi and lo limits */
ret = nct1008_write_reg(data, EXT_TEMP_LO_LIMIT_HI_BYTE_WR, 0);
if (ret)
goto err;
ret = nct1008_write_reg(data, EXT_TEMP_HI_LIMIT_HI_BYTE_WR,
NCT1008_MAX_TEMP);
err:
if (ret < 0)
dev_err(&data->client->dev, "EXT sensor init failed 0x%x", ret);
return ret;
}
static int nct1008_loc_sensor_init(struct nct1008_data *data)
{
int ret = 0, val;
struct nct1008_platform_data *pdata = &data->plat_data;
/* Local temperature h/w shutdown limit */
if (data->sensors[LOC].shutdown_limit != INT_MIN) {
val = temperature_to_value(pdata->extended_range,
data->sensors[LOC].shutdown_limit);
ret = nct1008_write_reg(data, LOC_THERM_LIMIT, val);
if (ret)
goto err;
dev_info(&data->client->dev, "LOC shutdown limit %d",
data->sensors[LOC].shutdown_limit);
}
/* Setup local hi and lo limits. */
ret = nct1008_write_reg(data, LOC_TEMP_HI_LIMIT_WR, NCT1008_MAX_TEMP);
if (ret)
goto err;
ret = nct1008_write_reg(data, LOC_TEMP_LO_LIMIT_WR, 0);
err:
if (ret < 0)
dev_err(&data->client->dev, "LOC sensor init failed 0x%x", ret);
return ret;
}
static int nct1008_sensors_init(struct nct1008_data *data)
{
int ret = -ENODEV;
int ext_err = 0;
int temp;
struct nct1008_platform_data *pdata = &data->plat_data;
if (!pdata)
goto err;
/* Configure sensor to trigger alerts clear THERM2_BIT and ALERT_BIT*/
data->config = 0;
/* Initially place in Standby */
ret = nct1008_write_reg(data, CONFIG_WR, STANDBY_BIT);
if (ret)
goto err;
/* Add a delay to make sure it enters into standby mode */
usleep_range(data->oneshot_conv_period_ns, data->oneshot_conv_period_ns
+ 1000);
ret = nct1008_loc_sensor_init(data);
if (ret < 0)
goto err;
ext_err = nct1008_ext_sensor_init(data);
if (pdata->extended_range)
data->config |= EXTENDED_RANGE_BIT;
ret = nct1008_write_reg(data, CONFIG_WR, data->config | STANDBY_BIT);
if (ret)
goto err;
/* Temperature conversion rate */
if (pdata->conv_rate >= 0) {
ret = nct1008_write_reg(data, CONV_RATE_WR, pdata->conv_rate);
if (ret)
goto err;
}
/* Initiate one-shot conversion */
ret = nct1008_write_reg(data, ONE_SHOT, 0x1);
if (ret)
goto err;
/* Give hardware necessary time to finish conversion */
usleep_range(data->oneshot_conv_period_ns, data->oneshot_conv_period_ns
+ 1000);
/* read initial local temperature */
ret = nct1008_get_temp_common(LOC, data, &temp);
if (ret < 0)
goto err;
dev_info(&data->client->dev, "initial LOC temp: %d ", temp);
/* read initial ext temperature */
if (ext_err == 0) {
ret = nct1008_get_temp_common(EXT, data, &temp);
if (ret < 0)
goto err;
dev_info(&data->client->dev, "initial EXT temp: %d ", temp);
}
err:
if (ret < 0)
dev_err(&data->client->dev, "sensor init failed 0x%x", ret);
return ret;
}
static int nct1008_limits_store(struct nct1008_data *data)
{
int val;
struct nct1008_platform_data *pdata = &data->plat_data;
/* Reset current hi/lo limit values with register values */
val = nct1008_read_reg(data, EXT_TEMP_LO_LIMIT_HI_BYTE_RD);
if (val < 0)
goto err;
data->sensors[EXT].current_lo_limit =
value_to_temperature(pdata->extended_range, val);
val = nct1008_read_reg(data, EXT_TEMP_HI_LIMIT_HI_BYTE_RD);
if (val < 0)
goto err;
data->sensors[EXT].current_hi_limit =
value_to_temperature(pdata->extended_range, val);
val = nct1008_read_reg(data, LOC_TEMP_LO_LIMIT_RD);
if (val < 0)
goto err;
data->sensors[LOC].current_lo_limit =
value_to_temperature(pdata->extended_range, val);
val = nct1008_read_reg(data, LOC_TEMP_HI_LIMIT_RD);
if (val < 0)
goto err;
data->sensors[LOC].current_hi_limit =
value_to_temperature(pdata->extended_range, val);
err:
if (val < 0)
dev_err(&data->client->dev, "limit reg read failed 0x%x", val);
return val;
}
static int nct1008_configure_sensor(struct nct1008_data *data)
{
int ret;
ret = nct1008_sensors_init(data);
if (ret < 0)
goto err;
ret = nct1008_limits_store(data);
if (ret < 0)
goto err;
if (data->chip != MAX6649)
nct1008_offsets_program(data);
err:
return ret;
}
static int nct1008_configure_irq(struct nct1008_data *data)
{
if (data->client->irq < 0)
return -EINVAL;
data->workqueue = create_singlethread_workqueue(data->chip_name);
INIT_WORK(&data->work, nct1008_work_func);
return request_irq(data->client->irq, nct1008_irq, IRQF_TRIGGER_NONE,
data->chip_name, data);
}
static int nct1008_dt_parse(struct i2c_client *client,
struct nct1008_data *data)
{
struct device_node *np = client->dev.of_node;
struct device_node *child;
struct nct1008_platform_data *pdata = &data->plat_data;
struct gpio_desc *nct1008_gpio = NULL;
unsigned int proc, index = 0;
pdata->conv_rate = INT_MIN;
data->sensors[LOC].shutdown_limit = INT_MIN;
data->sensors[EXT].shutdown_limit = INT_MIN;
if (!np) {
dev_err(&client->dev, "Cannot find the DT node\n");
return -ENODEV;
}
dev_info(&client->dev, "starting parse dt\n");
if (client->irq == 0) {
client->irq = -1;
dev_info(&client->dev, "Missing interrupt prop\n");
}
if (of_property_read_u32(np, "conv-rate", &pdata->conv_rate))
dev_info(&client->dev, "Missing conv-rate prop\n");
nct1008_gpio = gpiod_get(&client->dev, "temp-alert", GPIOD_IN);
if (IS_ERR(nct1008_gpio))
dev_info(&client->dev, "Missing temp-alert-gpio prop\n");
dev_dbg(&client->dev, "gpio:%d irq:%d\n", desc_to_gpio(nct1008_gpio),
gpiod_to_irq(nct1008_gpio));
/* optional properties */
/* Keep property with typo for backward compatibility */
if (!of_property_read_u32(np, "extended-rage", &proc) ||
!of_property_read_u32(np, "extended-range", &proc))
pdata->extended_range = (proc) ? true : false;
pdata->alpha = 10000;
pdata->beta = 0;
pdata->offset = 0;
pdata->fuse_offset = false;
if (!of_property_read_u32(np, "alpha", &proc))
pdata->alpha = proc;
if (!of_property_read_u32(np, "beta", &proc))
pdata->beta = proc;
if (!of_property_read_u32(np, "offset", &proc))
/* offset resolution is 0.25C resolution, TMP451 uses 0.0625C*/
pdata->offset = proc * 4;
else if (!of_property_read_u32(np, "offset-hi-res", &proc))
/* high resolution offset 0.0625C*/
pdata->offset = proc;
else if (of_property_read_bool(np, "support-fuse-offset"))
/* offset present in fuses */
pdata->fuse_offset = true;
else
dev_info(&client->dev, "programming offset of 0C\n");
/*
* This a legacy property that is incorrect because it assumes
* the first subnode will be the LOC sensor. This has been
* deprecated in favor of the new *-shutdown-limit properties
* but is being kept to maintain backward compatibility.
*/
for_each_child_of_node(np, child) {
if (!of_property_read_u32(child, "shutdown-limit", &proc))
data->sensors[index].shutdown_limit = proc;
index++;
}
if (index)
dev_info(&client->dev, "!!!Found deprecated property!!!\n");
if (!of_property_read_u32(np, "loc-shutdown-limit", &proc))
data->sensors[LOC].shutdown_limit = proc;
if (!of_property_read_u32(np, "ext-shutdown-limit", &proc))
data->sensors[EXT].shutdown_limit = proc;
dev_info(&client->dev, "success parsing dt\n");
client->dev.platform_data = pdata;
return 0;
}
static struct thermal_zone_of_device_ops loc_sops = {
.get_temp = nct1008_loc_get_temp_as_sensor,
.get_trend = nct1008_loc_get_trend_as_sensor,
.set_trips = nct1008_loc_set_trips,
};
static struct thermal_zone_of_device_ops ext_sops = {
.get_temp = nct1008_ext_get_temp_as_sensor,
.get_trend = nct1008_ext_get_trend_as_sensor,
.set_trips = nct1008_ext_set_trips,
};
static void nct1008_thermal_init(struct nct1008_data *data)
{
struct thermal_zone_device *tzd;
struct thermal_cooling_device *cdev;
struct device *dev = &data->client->dev;
/* Config for the Local sensor. */
tzd = thermal_zone_of_sensor_register(dev, LOC, data, &loc_sops);
if (!IS_ERR_OR_NULL(tzd))
data->sensors[LOC].thz = tzd;
/* register External sensor if connection is good */
tzd = thermal_zone_of_sensor_register(dev, EXT, data, &ext_sops);
if (!IS_ERR_OR_NULL(tzd))
data->sensors[EXT].thz = tzd;
cdev = thermal_of_cooling_device_register(dev->of_node,
"shutdown_warning", data,
&nct1008_shutdown_warning_ops);
if (IS_ERR_OR_NULL(cdev))
dev_err(dev, "cdev registration failed %ld\n", PTR_ERR(cdev));
}
/*
* Manufacturer(OnSemi) recommended sequence for
* Extended Range mode is as follows
* nct1008_configure_sensor:
* 1. Place in Standby
* 2. Scale the THERM and ALERT limits
* appropriately(for Extended Range mode).
* 3. Enable Extended Range mode.
* ALERT mask/THERM2 mode may be done here
* as these are not critical
* 4. Set Conversion Rate as required
* nct1008_enable:
* 5. Take device out of Standby
*/
/*
* function nct1008_probe takes care of initial configuration
*/
static int nct1008_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err;
struct nct1008_data *data;
if (!client->dev.of_node) {
dev_err(&client->dev, "missing device tree node\n");
return -EINVAL;
}
dev_dbg(&client->dev, "find device tree node, parsing dt\n");
data = devm_kzalloc(&client->dev, sizeof(struct nct1008_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
err = nct1008_dt_parse(client, data);
if (err)
return err;
data->client = client;
data->chip = id->driver_data;
strlcpy(data->chip_name, id->name, I2C_NAME_SIZE);
i2c_set_clientdata(client, data);
mutex_init(&data->mutex);
data->nct_reg = regulator_get(&client->dev, "vdd");
if (IS_ERR(data->nct_reg)) {
dev_err(&client->dev, "vdd regulator get failed: 0x%x\n", err);
mutex_destroy(&data->mutex);
return -ENODEV;
}
/* oneshot conversion time */
if (data->chip == TMP451)
data->oneshot_conv_period_ns = TMP451_CONV_TIME_ONESHOT_US;
else
data->oneshot_conv_period_ns = NCT_CONV_TIME_ONESHOT_US;
nct1008_power_control(data, true);
/* sensor is in standby */
err = nct1008_configure_sensor(data);
if (err < 0)
goto error;
err = nct1008_configure_irq(data);
if (err < 0)
dev_info(&client->dev, "irq config failed: 0x%x ", err);
/* sensor is running */
err = nct1008_enable(client);
if (err < 0)
goto error;
/* register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &nct1008_attr_group);
if (err < 0) {
dev_err(&client->dev, "\n sysfs create err=%d ", err);
goto error;
}
dev_info(&client->dev, "%s: initialized\n", __func__);
nct1008_thermal_init(data);
return 0;
error:
dev_err(&client->dev, "\n exit %s, err=%d ", __func__, err);
mutex_destroy(&data->mutex);
nct1008_power_control(data, false);
return err;
}
static int nct1008_remove(struct i2c_client *client)
{
struct nct1008_data *data = i2c_get_clientdata(client);
mutex_lock(&data->mutex);
data->stop_workqueue = 1;
mutex_unlock(&data->mutex);
cancel_work_sync(&data->work);
free_irq(data->client->irq, data);
sysfs_remove_group(&client->dev.kobj, &nct1008_attr_group);
nct1008_power_control(data, false);
if (data->nct_reg)
regulator_put(data->nct_reg);
mutex_destroy(&data->mutex);
return 0;
}
static void nct1008_shutdown(struct i2c_client *client)
{
struct nct1008_data *data = i2c_get_clientdata(client);
mutex_lock(&data->mutex);
data->stop_workqueue = 1;
mutex_unlock(&data->mutex);
cancel_work_sync(&data->work);
if (client->irq)
disable_irq(client->irq);
if (data->sensors[LOC].thz) {
if (client->dev.of_node)
thermal_zone_of_sensor_unregister
(&(client->dev), data->sensors[LOC].thz);
else
thermal_zone_device_unregister(data->sensors[LOC].thz);
data->sensors[LOC].thz = NULL;
}
if (data->sensors[EXT].thz) {
if (client->dev.of_node)
thermal_zone_of_sensor_unregister
(&(client->dev), data->sensors[EXT].thz);
else
thermal_zone_device_unregister(data->sensors[EXT].thz);
data->sensors[EXT].thz = NULL;
}
mutex_lock(&data->mutex);
data->nct_disabled = 1;
mutex_unlock(&data->mutex);
}
static int nct1008_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
int err;
struct nct1008_data *data = i2c_get_clientdata(client);
mutex_lock(&data->mutex);
data->stop_workqueue = 1;
mutex_unlock(&data->mutex);
cancel_work_sync(&data->work);
disable_irq(client->irq);
err = nct1008_disable(client);
nct1008_power_control(data, false);
return err;
}
static int nct1008_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
int err;
struct nct1008_data *data = i2c_get_clientdata(client);
nct1008_power_control(data, true);
err = nct1008_configure_sensor(data);
if (err < 0)
return err;
err = nct1008_enable(client);
if (err < 0)
return err;
mutex_lock(&data->mutex);
data->stop_workqueue = 0;
mutex_unlock(&data->mutex);
enable_irq(client->irq);
return 0;
}
static const struct dev_pm_ops nct1008_pm_ops = {
.suspend = nct1008_suspend,
.resume = nct1008_resume,
};
static const struct i2c_device_id nct1008_id[] = {
{ "nct1008", NCT1008 },
{ "nct72", NCT72 },
{ "tmp451", TMP451 },
{ "max6649", MAX6649 },
{}
};
MODULE_DEVICE_TABLE(i2c, nct1008_id);
static const struct of_device_id nct1008_of_match[] = {
{.compatible = "onsemi,nct72", },
{.compatible = "ti,tmp451", },
{.compatible = "maxim,max6649", },
{ }
};
static struct i2c_driver nct1008_driver = {
.driver = {
.name = "nct1008_nct72",
.pm = &nct1008_pm_ops,
.of_match_table = nct1008_of_match,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = nct1008_probe,
.remove = nct1008_remove,
.id_table = nct1008_id,
.shutdown = nct1008_shutdown,
};
module_i2c_driver(nct1008_driver);
MODULE_AUTHOR("Srikar Srimath Tirumala <srikars@nvidia.com>");
MODULE_DESCRIPTION("Temperature sensor driver for NCT1008/NCT72/TMP451");
MODULE_LICENSE("GPL");