Update install script to be used on second level directory from Linux_for_Tegra/*/install.sh

L4T r32.2.1 – JetPack 4.2.2

install.sh

@@ -1,11 +1,11 @@
 #!/bin/bash
 
 COMPAT_MAJOR=("32")
-COMPAT_MINOR=("4.4")
+COMPAT_MINOR=("2.1")
 
 COMPAT_JETSON=("TX2" "TX2i" "TX2-4G")
 
-CTI_L4T_VER="V003"
+CTI_L4T_VER="V004"
 
 
 #utility functions
@@ -39,32 +39,9 @@ chkfolder(){
 
 }
 
-update_debsrc_list(){
-    if [ -f $PWD/../../rootfs/etc/apt/sources.list.d/nvidia-l4t-apt-source.list ]; then
-        echo "Suppressing nvidia-l4t-apt-source"
-        if ! type sed > /dev/null; then
-            mv $PWD/../../rootfs/etc/apt/sources.list.d/nvidia-l4t-apt-source.list $PWD/../../rootfs/etc/apt/sources.list.d/nvidia-l4t-apt-source.list.old
-        else
-            sed -i 's/^/#/' $PWD/../../rootfs/etc/apt/sources.list.d/nvidia-l4t-apt-source.list
-        fi
-    fi
-}
-
-
-install_extra(){
-    cp ./extra/*.deb $PWD/../../nv_tegra/l4t_deb_packages/
-    #cp ./extra/*.asc $PWD/../../rootfs/etc/apt/trusted.gpg.d/
-    cp ./extra/*.list $PWD/../../rootfs/etc/apt/sources.list.d/
-}
-
-install_key(){
-    cp -f ./key/* $PWD/../../rootfs/etc/apt/trusted.gpg.d/
-}
 
 install_conf(){
-
+    cp -r ./conf/* $PWD/../..
-    cp -rf ./conf/* $PWD/../../
-
 }
 
 install_dtb(){
@@ -73,27 +50,16 @@ install_dtb(){
 }
 
 install_kernel(){
-    # remove old debs 
+    cp ./kernel/*Image $PWD/../../kernel/
-    rm $PWD/../../kernel/*.deb
-    
-    # copy kernel debs
-    cp ./kernel/*.deb $PWD/../../kernel
-    cp ./kernel/*Image $PWD/../../kernel
     cp ./kernel/kernel_supplements.tbz2 $PWD/../../kernel/
 }
 
-
 install_bl(){
-    if [ "$(ls -A ./bl)" ]; then
+    cp -r ./bl/* $PWD/../../bootloader/
-        cp -r ./bl/* $PWD/../../bootloader/
-    fi
-
 }
 
 install_rootfs(){
-    if [ "$(ls -A ./rootfs)" ]; then
+    cp -r ./rootfs/* $PWD/../../rootfs/
-        cp -r ./rootfs/* $PWD/../../rootfs/
-    fi
 }
 
 install_ver_file(){
@@ -126,8 +92,8 @@ print_versions(){
 usage(){
     echo -e "  Usage: ./install.sh "
     echo -e "  Before installing this BSP, please read the included readme.txt"
-    echo -e "  To switch between different products, the TX2/TX2i/TX2-4G will need to be re-flashed"
+    echo -e "  To switch between different products, the TX2/TX2i/TX2-4G will need"
-    echo -e "  Ensure to extract clean rootfs\n"
+    echo -e "  to be re-flashed"
     echo -e "  Below are the compatible L4T versions and board profiles:\n"
 
     print_versions
@@ -144,27 +110,26 @@ chkfolder
 tar -pxzf resources.tgz
 
 #install CTI-flash
-mv cti-flash.sh $PWD/../../
+mv cti-flash.sh $PWD/../..
 chmod +x $PWD/../../cti-flash.sh
 
 install_conf
 
-install_bl
-
 install_dtb
 
+install_bl
+
 install_kernel
 
 install_ver_file
 
-install_extra
+pushd $PWD/../..
-
-pushd $PWD/../../
 
 ./apply_binaries.sh
 
 popd
 
+install_rootfs
 
 # ensure the files finish copying 
 sync

readme.txt

@@ -1,7 +1,7 @@
 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 +	Board Support Package ReadMe for Connect Tech Nvidia Jetson TX2 Carriers
-+	BSP Version:	tx2-32.4.4-V003
++	BSP Version:	32.2.1-V004
-+	Date:		2021/01/19		
++	Date:		2019/11/25		
 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++	
 
 ================================================================================
@@ -37,8 +37,8 @@
 		    Requirements	
 ================================================================================
 
-    -x86 based host machine running Ubuntu 18.04
+    -x86 based host machine running Ubuntu 16.04 or Ubuntu 18.04
-    -Jetpack 4.4.1 installed via Nvidia SDK Manager (from Nvidia Embedded Download Center)
+    -Jetpack 4.2.2 installed via Nvidia SDK Manager (from Nvidia Embedded Download Center)
     -TX2, TX2i or TX2-4G module
     -Connect Tech TX2 Family Carrier 
     -USB Cable for flashing 
@@ -50,14 +50,14 @@
 			Installation
 ================================================================================
 
-	1. Before Installing the BSP you will need to install Jetpack 4.4.1 on the x86
+	1. Before Installing the BSP you will need to install Jetpack 4.2.2 on the x86
        host system using the Nvidia SDK Manager
 
-	2. Copy the CTI-L4T-TX2-32.4.4-V###.tgz package into ~/nvidia/nvidia_sdk/JetPack_4.4.1_Linux_JETSON_TX2/Linux_for_Tegra/
+	2. Copy the CTI-L4T-TX2-32.2.1-V###.tgz package into ~/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/
 
     3. Extract the BSP:
 
-		tar -xzf CTI-L4T-TX2-32.4.4-V###.tgz
+		tar -xzf CTI-L4T-TX2-32.2.1-V###.tgz
 
 	  (replacing ### with your file name)
 
@@ -97,74 +97,26 @@
         ./flash.sh cti/tx2-4G/astro-mpcie mmcblk0p1
         ./flash.sh cti/tx2-4G/spacely-imx274-3cam  mmcblk0p1
 
-================================================================================
-				Installing JetPack from SDK Manager 
-================================================================================
-	1. Please follow installation steps from kdb374 for Jetpack 4.2+ 
-		http://connecttech.com/resource-center/kdb374/
 
-================================================================================
-	Installing JetPack from Nvidia's Source packages (Alternate approach)
-================================================================================
-
-	1. Go to https://developer.nvidia.com/embedded/linux-tegra-archive and click on
-	   the green button labeled "32.4.4 >".	   
-	
-	2. Download the "L4T Driver Package (BSP)" and "Sample Root Filesystem" files for TX2.
-	   Afterwards, you should have the files "Tegra186_Linux_R32.4.4_aarch64.tbz2" and 
-	   "Tegra_Linux_Sample-Root-Filesystem_R32.4.4_aarch64.tbz2".
-	   
-	3. Create a directory named ~/nvidia/nvidia_sdk/JetPack_4.4.1_Linux_JETSON_TX2/
-	   and copy the "Tegra186_Linux_R32.4.4_aarch64.tbz2" file you downloaded into 
-	   that directory.
-	   
-	4. Unzip the tarball:
-       
-	   "sudo tar jxf Tegra186_Linux_R32.4.4_aarch64.tbz2"
-	   
-	5. You should now have a new directory called Linux_for_Tegra in your 
-	   "JetPack_4.4.1_Linux_JETSON_TX2" folder. Change directories into that 
-	   and then copy the "Tegra_Linux_Sample-Root-Filesystem_R32.4.4_aarch64.tbz2" 
-	   file you downloaded into the rootfs folder inside.
-	   
-	6. Change into the rootfs folder and unzip the tarball:
-	
-	   "sudo tar jxf Tegra_Linux_Sample-Root-Filesystem_R32.4.4_aarch64.tbz2"
-	   
-	7. If you wish to flash one of NVIDIA’s devkits, or move on to installing CTI’s BSP, 
-	   change the directories back to ~/nvidia/nvidia_sdk/JetPack_4.4.1_Linux_JETSON_TX2/Linux_for_Tegra/ 
-	   and run:  "sudo ./appy_binaries.sh" 
 
 ================================================================================
 			Flashing TX2/TX2i/TX2-4G
 ================================================================================
    
     1. Connect the TX2/TX2i/TX2-4G and Carrier (or Dev-Kit) to the computer via USB
-       following the instructions in the appropriate manual.
+       Following the instructions in the appropriate manual.
     2. Put the system to be flashed into recovery mode, following the 
        instructions in the appropriate manual
     4. Run ./flash.sh cti/<module>/<board> mmcblk0p1 from Linux_for_Tegra directory
     5. Once the flashing has completed, the TX2/TX2i/TX2-4G will reboot 
-	6. To switch between different boards, you can repeat these steps. Alternatively 
+	6. To switch between different boards, you will need ot repeat these steps
-	   follow the instructions below for runtime switching profiles on the 
+       There is currently no run time support for switching profiles on the 
        TX2/TX2i/TX2-4G
 
 
     Consult KDB344 at for TX2/TX2i hardware compatiblity with your carrier.
     http://connecttech.com/resource-center-category/all-kdb-entries/
 
-================================================================================
-Switching Profiles on TX2/TX2i/TX2-4G
-================================================================================
-1. Open a terminal on the TX2/TX2i/TX2-4G
-
-2. Run "sudo cti-tx2-dd.sh"
-
-3. Select the profile you wish to switch to from the menu
-
-4. Restart the system
-
-
 ================================================================================
 			Product Specific Details
 ================================================================================
@@ -194,7 +146,7 @@ Switching Profiles on TX2/TX2i/TX2-4G
 				ASG001 (Astro)
 --------------------------------------------------------------------------------
 
-    -PWM Fan Support
+	-PWM Fan Support
     -USB Support
     -mPCIe Support
     
@@ -203,17 +155,16 @@ Switching Profiles on TX2/TX2i/TX2-4G
 				ASG002 (Elroy)
 --------------------------------------------------------------------------------
 
-    -PWM Fan Support
+	-PWM Fan Support
     -USB Support
     -mPCIe Support
-    -SPI Support
 
     NOTE: Currently NO CSI camera support
 --------------------------------------------------------------------------------
 				ASG003 (Orbitty)
 --------------------------------------------------------------------------------
 
-    -PWM Fan Support
+	-PWM Fan Support
     -USB Support
 --------------------------------------------------------------------------------
 				ESG501 (Rosie)
@@ -225,7 +176,7 @@ Switching Profiles on TX2/TX2i/TX2-4G
 				ESG503 (Rudi)
 --------------------------------------------------------------------------------
 	
-    -USB Support
+	-USB Support
     -GPIO Support
     -mPCIe Support
     -CAN Support 
@@ -261,134 +212,113 @@ Switching Profiles on TX2/TX2i/TX2-4G
 --------------------------------------------------------------------------------
     -USB Support
     -PCIe Support 
-    -IMX274 2-cam support
+
+    NOTE: Currently NO CSI camera support
 
 
 --------------------------------------------------------------------------------
 				ASG016 (Quasar)
 --------------------------------------------------------------------------------
 
-    -PWM Fan Support
+	-PWM Fan Support
     -USB Support
-    -IMX274 Support
+	-IMX274 Support
     -IMX185 Support
 
 ================================================================================
 				Changes
 ================================================================================
-	Version TX2-32.4.4-V003, January 19, 2021
+
-		- Updated cti_tegra_defconfig
+	Version 100, May 19, 2017
-		- Resolves issues to allow ZFS to function properly.
+        -Initial Release for the TX2  
-	Version TX2-32.4.4-V002, December 09, 2020
+	Version 101, June 01, 2017
-        	- Resolved "disagrees about module_layout" issue for loading external kernel modules.
+        -Fixed issue with some loadable modules eg. uvcvideo  
-	Version TX2-32.4.4-V001, November 16, 2020
+        -Added Elroy CSI camera support
-		-Initial Release for Jetpack 4.4.1/L4T 32.4.4
+    Version 102, June 26, 2017
-	Version TX2-32.4.3-V002, September 25, 2020
+        -Added second UART support to all carriers  
-		- Supports apt-get upgrade
+    Version 103, June 27, 2017
-        	- Upgrade support from cti debian server from this version onwards
+        -Changed Rootfs size to 28GB from 14GB
-		- Installs a script to enable DTB switching using dd command
+    Version 104, August 16, 2017
-            		- Script: cti-tx2-dd.sh
+        -Added support for L4T 28.1 
-            		- Install path: /usr/bin		
+        -Added support for Spacely and Cogswell
-	Version TX2-32.4.3-V001, August 05, 2020
+    Version 105, August 21, 2017
-		-Initial Release for Jetpack 4.4/L4T 32.4.3	
+        -Added Astro and Elroy CSI camera Support
-	Version TX2-32.4.2-V003, July 06, 2020
+    Version 106, September 25, 2017
-		-Added missing ASG008 camera support for TX2
+        -Added Astro RevG+ and Elroy RevF+ profiles 
-	Version TX2-32.4.2-V002, June 26, 2020
+    Version 107, October 20, 2017
-		-Added missing VPG003 support
+        -Fixed an issue with the Spacely Devicetree not booting on Rev B00 TX2 modules 
-		-Added SPI to Elroy	
+        -Added VPG003 support
-	Version TX2-32.4.2-V001, June 05, 2020
+    Version 108, November 02, 2017
-		-Initial Release for Jetpack 4.4/L4T 32.4.2	
+        -IMX274 camera performance improvements 
-	Version TX2-32.3.1-V001, January 27, 2020
+    Version 109, November 07, 2017
-		-Initial Release for Jetpack 4.3/L4T 32.3.1	
+        -Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.1)
-	Version TX2-32.2.1-V004, November 25, 2019
+    Version 110, November 08, 2017  
-		-Adding TX2-4G support back in	
+        -Added Rudi GPIO support 
-	Version TX2-32.2.1-V003, November 20, 2019
+    Version 111, February 27, 2018
-		-Adding TX2i support back in	
+        -Fixes to carrier GPIO states and kernel image
+    Version 112, March 15, 2018
+        -Added support for USB only based mPCIe cards on the Elroy
+    Version 113, March 27, 2018
+        -Initial release for Jetpack 3.2 (L4T 28.2)
+    Version 114, April 12, 2018
+        -Added CAN Support
+        -Added 3 and 6 IMX274 camera support for Spacely
+        -Added IMX274 support for sprocket
+        -Added 2 OV5693 camera support for Elroy
+        -Fixed issue with USB based mPCIe cards on Elroy
+    Version 115, April 16, 2018
+        -Fixed issue with PCIe in Elroy RevF+ profile
+        -Added IMX185 support for Sprocket
+        -Fixed the "pink" IMX274 CSI camera issue
+        -Added TX2i support
+    Version 116, April 23, 2018
+        -Fixed issue with ASG006 CAN
+        -Added CTI assisted flash
+        -Added Lumera camera support
+    Version 117, May 18, 2018
+        -Added fix for incorrect CAN IDs being read on Rudi/Spacely/Cogswell
+    Version 118, June 26, 2018
+        -Updated for L4T 28.2.1
+        -Added Astro Audio Codec Support
+        -Added 3x and 6x IMX185 Camera support for Spacely
+    Version 119, July 27, 2018
+        -Fixed a suspend bug
+    Version 120, Sept 21, 2018
+        -Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.2+)
+    Version 121, November 09, 2018
+        -Added 720p support for IMX274 cameras
+    Version 122, May 06, 2019
+        -Initial Release for Jetpack 4.2/L4T 32.1.0
+    Version 123, May 09, 2019
+        -Fixed PWM Fan issue 
+    Version 124, July 02, 2019
+        -Fixed issue where kernel would sometimes hang when run headless 
+        -Added IMX274 support to Spacely 
+    Version 125, July 05, 2019
+        -Fixed issue with Elroy mPCIe
+        -Added IMX185 support to Spacely 
+    Version 126, August 16, 2019
+        -Jetpack 4.2.1 Release
+        -Moved .conf files to cti folder
+        -Added support for Quasar
+        -Added support for TX2-4G
+	Version 126-1, November 11, 2019
+        -fixed cti-flash script
+        -added missing .conf files
+        -added IMX185 & IMX274 support for Sprocket
+        -added IMX185 & IMX274 support for Quasar
+        -Fixed TX2i PWM fan issue
+        -Changed all GPIOs to pull-ups
+        -Fixed TX2i nvpmodel issue  
 	Version TX2-32.2.1-V002, November 15, 2019
 		-Initial Release for Jetpack 4.2.2/L4T 32.2.1
 		-Limited release for TX2, not including TX2i or TX2-4G
 		-new naming scheme
-	Version 126-1, November 11, 2019
+	Version TX2-32.2.1-V003, November 20, 2019
-        	-fixed cti-flash script
+		-Adding TX2i support back in
-        	-added missing .conf files
+	Version TX2-32.2.1-V004, November 25, 2019
-        	-added IMX185 & IMX274 support for Sprocket
+		-Adding TX2-4G support back in
-        	-added IMX185 & IMX274 support for Quasar
+ 
-       		-Fixed TX2i PWM fan issue
-        	-Changed all GPIOs to pull-ups
-        	-Fixed TX2i nvpmodel issue  
-	Version 126, August 16, 2019
-        	-Jetpack 4.2.1 Release
-	        -Moved .conf files to cti folder
-        	-Added support for Quasar
-	        -Added support for TX2-4G
-	Version 125, July 05, 2019
-	        -Fixed issue with Elroy mPCIe
-        	-Added IMX185 support to Spacely 
-	Version 124, July 02, 2019
-	        -Fixed issue where kernel would sometimes hang when run headless 
-        	-Added IMX274 support to Spacely 
-	Version 123, May 09, 2019
-	        -Fixed PWM Fan issue 
-	Version 122, May 06, 2019
-        	-Initial Release for Jetpack 4.2/L4T 32.1.0
-	Version 121, November 09, 2018
-	        -Added 720p support for IMX274 cameras
-	Version 120, Sept 21, 2018
-        	-Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.2+)
-	Version 119, July 27, 2018
-	        -Fixed a suspend bug
-	Version 118, June 26, 2018
-        	-Updated for L4T 28.2.1
-	        -Added Astro Audio Codec Support
-        	-Added 3x and 6x IMX185 Camera support for Spacely	
-	Version 117, May 18, 2018
-	        -Added fix for incorrect CAN IDs being read on Rudi/Spacely/Cogswell
-	Version 116, April 23, 2018
-        	-Fixed issue with ASG006 CAN
-	        -Added CTI assisted flash
-        	-Added Lumera camera support
-	Version 115, April 16, 2018
-	        -Fixed issue with PCIe in Elroy RevF+ profile
-        	-Added IMX185 support for Sprocket
-	        -Fixed the "pink" IMX274 CSI camera issue
-        	-Added TX2i support	
-	Version 114, April 12, 2018
-	        -Added CAN Support
-        	-Added 3 and 6 IMX274 camera support for Spacely
-	        -Added IMX274 support for sprocket
-        	-Added 2 OV5693 camera support for Elroy
-	        -Fixed issue with USB based mPCIe cards on Elroy	
-	Version 113, March 27, 2018
-        	-Initial release for Jetpack 3.2 (L4T 28.2)	
-	Version 112, March 15, 2018
-	        -Added support for USB only based mPCIe cards on the Elroy
-	Version 111, February 27, 2018
-        	-Fixes to carrier GPIO states and kernel image
-	Version 110, November 08, 2017  
-	        -Added Rudi GPIO support 
-	Version 109, November 07, 2017
-        	-Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.1)
-	Version 108, November 02, 2017
-	        -IMX274 camera performance improvements 
-	Version 107, October 20, 2017
-        	-Fixed an issue with the Spacely Devicetree not booting on Rev B00 TX2 modules 
-	        -Added VPG003 support
-	Version 106, September 25, 2017
-        	-Added Astro RevG+ and Elroy RevF+ profiles
-	Version 105, August 21, 2017
-       		-Added Astro and Elroy CSI camera Support
-	Version 104, August 16, 2017
-        	-Added support for L4T 28.1 
-        	-Added support for Spacely and Cogswell	
-	Version 103, June 27, 2017
-        	-Changed Rootfs size to 28GB from 14GB
-	Version 102, June 26, 2017
-        	-Added second UART support to all carriers  
-	Version 101, June 01, 2017
-        	-Fixed issue with some loadable modules eg. uvcvideo  
-        	-Added Elroy CSI camera support	
-	Version 100, May 19, 2017
-        	-Initial Release for the TX2  
 ================================================================================
 			Contacting Connect Tech
 ================================================================================