346 lines
13 KiB
Plaintext
346 lines
13 KiB
Plaintext
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
+ Board Support Package ReadMe for Connect Tech Nvidia Jetson TX2 Carriers
|
||
|
+ BSP Version: 32.2.1-V004
|
||
|
+ Date: 2019/11/25
|
||
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
||
|
================================================================================
|
||
|
Introduction
|
||
|
================================================================================
|
||
|
|
||
|
This Board Support Package adds support for Connect Tech Jetson TX2 Family
|
||
|
carrier boards to Linux4Tegra. It includes any extra files required
|
||
|
to use all the features of the carriers.
|
||
|
|
||
|
Please check the "Product Specific Details" section for what features
|
||
|
for your board is supported with this BSP release and the "Changes"
|
||
|
section for the changes made between versions.
|
||
|
You can check which version of the BSP you have installed by running:
|
||
|
|
||
|
cat /etc/cti/CTI-L4T.version
|
||
|
|
||
|
Check for the Latest Version of the CTI-L4T BSP at:
|
||
|
|
||
|
http://connecttech.com/resource-center/l4t-board-support-packages/
|
||
|
|
||
|
Please check the requirements section for minimum requirements.
|
||
|
|
||
|
Consult KDB344 at for TX2 hardware compatiblity with your carrier.
|
||
|
http://connecttech.com/resource-center-category/all-kdb-entries/
|
||
|
|
||
|
More detailed Release Note can be found here:
|
||
|
|
||
|
http://connecttech.com/resource-center/cti-l4t-nvidia-jetson-board-support-package-release-notes/
|
||
|
|
||
|
|
||
|
================================================================================
|
||
|
Requirements
|
||
|
================================================================================
|
||
|
|
||
|
-x86 based host machine running Ubuntu 16.04 or Ubuntu 18.04
|
||
|
-Jetpack 4.2.2 installed via Nvidia SDK Manager (from Nvidia Embedded Download Center)
|
||
|
-TX2, TX2i or TX2-4G module
|
||
|
-Connect Tech TX2 Family Carrier
|
||
|
-USB Cable for flashing
|
||
|
|
||
|
*L4T version can be found in /etc/nv_tegra_release and will look like this:
|
||
|
# R32 (release), REVISION: 2.0
|
||
|
|
||
|
================================================================================
|
||
|
Installation
|
||
|
================================================================================
|
||
|
|
||
|
1. Before Installing the BSP you will need to install Jetpack 4.2.2 on the x86
|
||
|
host system using the Nvidia SDK Manager
|
||
|
|
||
|
2. Copy the CTI-L4T-TX2-32.2.1-V###.tgz package into ~/nvidia/nvidia_sdk/JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/
|
||
|
|
||
|
3. Extract the BSP:
|
||
|
|
||
|
tar -xzf CTI-L4T-TX2-32.2.1-V###.tgz
|
||
|
|
||
|
(replacing ### with your file name)
|
||
|
|
||
|
3. Change into the CTI-L4T directory:
|
||
|
|
||
|
cd ./CTI-L4T
|
||
|
|
||
|
4. Run the install script (as root or sudo) to automatically install
|
||
|
the BSP files to the correct locations:
|
||
|
|
||
|
sudo ./install.sh
|
||
|
cd ..
|
||
|
|
||
|
5. The CTI-L4T BSP is now installed on the host system and it should now be
|
||
|
able to flash the TX2/TX2i/TX2-4G.
|
||
|
|
||
|
6. To flash on the TX2, TX2i or TX2-4G use the following (do not add ".conf"):
|
||
|
|
||
|
CTI Assisted Flashing:
|
||
|
./cti-flash.sh
|
||
|
|
||
|
Manual Flash:
|
||
|
./flash.sh cti/<module>/<boardname> mmcblk0p1
|
||
|
|
||
|
TX2 Examples:
|
||
|
./flash.sh cti/tx2/astro-usb3 mmcblk0p1
|
||
|
./flash.sh cti/tx2/astro-mpcie mmcblk0p1
|
||
|
./flash.sh cti/tx2/spacely-imx274-3cam mmcblk0p1
|
||
|
|
||
|
TX2i Examples:
|
||
|
./flash.sh cti/tx2i/astro-usb3 mmcblk0p1
|
||
|
./flash.sh cti/tx2i/astro-mpcie mmcblk0p1
|
||
|
./flash.sh cti/tx2i/spacely-imx274-3cam mmcblk0p1
|
||
|
|
||
|
TX2-4G Examples:
|
||
|
./flash.sh cti/tx2-4G/astro-usb3 mmcblk0p1
|
||
|
./flash.sh cti/tx2-4G/astro-mpcie mmcblk0p1
|
||
|
./flash.sh cti/tx2-4G/spacely-imx274-3cam mmcblk0p1
|
||
|
|
||
|
|
||
|
|
||
|
================================================================================
|
||
|
Flashing TX2/TX2i/TX2-4G
|
||
|
================================================================================
|
||
|
|
||
|
1. Connect the TX2/TX2i/TX2-4G and Carrier (or Dev-Kit) to the computer via USB
|
||
|
Following the instructions in the appropriate manual.
|
||
|
2. Put the system to be flashed into recovery mode, following the
|
||
|
instructions in the appropriate manual
|
||
|
4. Run ./flash.sh cti/<module>/<board> mmcblk0p1 from Linux_for_Tegra directory
|
||
|
5. Once the flashing has completed, the TX2/TX2i/TX2-4G will reboot
|
||
|
6. To switch between different boards, you will need ot repeat these steps
|
||
|
There is currently no run time support for switching profiles on the
|
||
|
TX2/TX2i/TX2-4G
|
||
|
|
||
|
|
||
|
Consult KDB344 at for TX2/TX2i hardware compatiblity with your carrier.
|
||
|
http://connecttech.com/resource-center-category/all-kdb-entries/
|
||
|
|
||
|
================================================================================
|
||
|
Product Specific Details
|
||
|
================================================================================
|
||
|
|
||
|
TX2i Compatablity Note:
|
||
|
The following carriers require a hardware ECN to be applied in order to work
|
||
|
with the TX2i. All new boards sold after April 16th will have the ECN applied
|
||
|
Please contact Connect Tech support if you are unsure if the ECN has been
|
||
|
applied
|
||
|
|
||
|
-Astro pre-Rev H
|
||
|
-Spacely Rev D & E
|
||
|
-Cogswell
|
||
|
|
||
|
TX2-4G Compatablity Note:
|
||
|
The following carriers require a hardware ECN to be applied in order to work
|
||
|
with the TX2-4G. All new boards sold after November 8th will have the ECN applied
|
||
|
Please contact Connect Tech support if you are unsure if the ECN has been
|
||
|
applied
|
||
|
|
||
|
-Astro
|
||
|
-Elroy
|
||
|
-Cogswell
|
||
|
-Spacely
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG001 (Astro)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-PWM Fan Support
|
||
|
-USB Support
|
||
|
-mPCIe Support
|
||
|
|
||
|
NOTE: Currently NO CSI camera support
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG002 (Elroy)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-PWM Fan Support
|
||
|
-USB Support
|
||
|
-mPCIe Support
|
||
|
|
||
|
NOTE: Currently NO CSI camera support
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG003 (Orbitty)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-PWM Fan Support
|
||
|
-USB Support
|
||
|
--------------------------------------------------------------------------------
|
||
|
ESG501 (Rosie)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-mPCIe Support
|
||
|
-USB Support
|
||
|
--------------------------------------------------------------------------------
|
||
|
ESG503 (Rudi)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-USB Support
|
||
|
-GPIO Support
|
||
|
-mPCIe Support
|
||
|
-CAN Support
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG008 (Sprocket)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-USB Support
|
||
|
-IMX274 Support
|
||
|
-IMX185 Support
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG007 (Cogswell)
|
||
|
--------------------------------------------------------------------------------
|
||
|
-USB Support
|
||
|
-PCIe Support
|
||
|
-GPIO Support
|
||
|
-CAN Support
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG006 (Spacely)
|
||
|
--------------------------------------------------------------------------------
|
||
|
-USB Support
|
||
|
-PCIe Support
|
||
|
-GPIO Support
|
||
|
-CAN Support
|
||
|
-IMX274 Support
|
||
|
-IMX185 Support
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
VPG003 (Graphite-VPX)
|
||
|
--------------------------------------------------------------------------------
|
||
|
-USB Support
|
||
|
-PCIe Support
|
||
|
|
||
|
NOTE: Currently NO CSI camera support
|
||
|
|
||
|
|
||
|
--------------------------------------------------------------------------------
|
||
|
ASG016 (Quasar)
|
||
|
--------------------------------------------------------------------------------
|
||
|
|
||
|
-PWM Fan Support
|
||
|
-USB Support
|
||
|
-IMX274 Support
|
||
|
-IMX185 Support
|
||
|
|
||
|
================================================================================
|
||
|
Changes
|
||
|
================================================================================
|
||
|
|
||
|
Version 100, May 19, 2017
|
||
|
-Initial Release for the TX2
|
||
|
Version 101, June 01, 2017
|
||
|
-Fixed issue with some loadable modules eg. uvcvideo
|
||
|
-Added Elroy CSI camera support
|
||
|
Version 102, June 26, 2017
|
||
|
-Added second UART support to all carriers
|
||
|
Version 103, June 27, 2017
|
||
|
-Changed Rootfs size to 28GB from 14GB
|
||
|
Version 104, August 16, 2017
|
||
|
-Added support for L4T 28.1
|
||
|
-Added support for Spacely and Cogswell
|
||
|
Version 105, August 21, 2017
|
||
|
-Added Astro and Elroy CSI camera Support
|
||
|
Version 106, September 25, 2017
|
||
|
-Added Astro RevG+ and Elroy RevF+ profiles
|
||
|
Version 107, October 20, 2017
|
||
|
-Fixed an issue with the Spacely Devicetree not booting on Rev B00 TX2 modules
|
||
|
-Added VPG003 support
|
||
|
Version 108, November 02, 2017
|
||
|
-IMX274 camera performance improvements
|
||
|
Version 109, November 07, 2017
|
||
|
-Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.1)
|
||
|
Version 110, November 08, 2017
|
||
|
-Added Rudi GPIO support
|
||
|
Version 111, February 27, 2018
|
||
|
-Fixes to carrier GPIO states and kernel image
|
||
|
Version 112, March 15, 2018
|
||
|
-Added support for USB only based mPCIe cards on the Elroy
|
||
|
Version 113, March 27, 2018
|
||
|
-Initial release for Jetpack 3.2 (L4T 28.2)
|
||
|
Version 114, April 12, 2018
|
||
|
-Added CAN Support
|
||
|
-Added 3 and 6 IMX274 camera support for Spacely
|
||
|
-Added IMX274 support for sprocket
|
||
|
-Added 2 OV5693 camera support for Elroy
|
||
|
-Fixed issue with USB based mPCIe cards on Elroy
|
||
|
Version 115, April 16, 2018
|
||
|
-Fixed issue with PCIe in Elroy RevF+ profile
|
||
|
-Added IMX185 support for Sprocket
|
||
|
-Fixed the "pink" IMX274 CSI camera issue
|
||
|
-Added TX2i support
|
||
|
Version 116, April 23, 2018
|
||
|
-Fixed issue with ASG006 CAN
|
||
|
-Added CTI assisted flash
|
||
|
-Added Lumera camera support
|
||
|
Version 117, May 18, 2018
|
||
|
-Added fix for incorrect CAN IDs being read on Rudi/Spacely/Cogswell
|
||
|
Version 118, June 26, 2018
|
||
|
-Updated for L4T 28.2.1
|
||
|
-Added Astro Audio Codec Support
|
||
|
-Added 3x and 6x IMX185 Camera support for Spacely
|
||
|
Version 119, July 27, 2018
|
||
|
-Fixed a suspend bug
|
||
|
Version 120, Sept 21, 2018
|
||
|
-Fixed an issue where some monitors would prevent the Jetson from booting if plugged in (28.2+)
|
||
|
Version 121, November 09, 2018
|
||
|
-Added 720p support for IMX274 cameras
|
||
|
Version 122, May 06, 2019
|
||
|
-Initial Release for Jetpack 4.2/L4T 32.1.0
|
||
|
Version 123, May 09, 2019
|
||
|
-Fixed PWM Fan issue
|
||
|
Version 124, July 02, 2019
|
||
|
-Fixed issue where kernel would sometimes hang when run headless
|
||
|
-Added IMX274 support to Spacely
|
||
|
Version 125, July 05, 2019
|
||
|
-Fixed issue with Elroy mPCIe
|
||
|
-Added IMX185 support to Spacely
|
||
|
Version 126, August 16, 2019
|
||
|
-Jetpack 4.2.1 Release
|
||
|
-Moved .conf files to cti folder
|
||
|
-Added support for Quasar
|
||
|
-Added support for TX2-4G
|
||
|
Version 126-1, November 11, 2019
|
||
|
-fixed cti-flash script
|
||
|
-added missing .conf files
|
||
|
-added IMX185 & IMX274 support for Sprocket
|
||
|
-added IMX185 & IMX274 support for Quasar
|
||
|
-Fixed TX2i PWM fan issue
|
||
|
-Changed all GPIOs to pull-ups
|
||
|
-Fixed TX2i nvpmodel issue
|
||
|
Version TX2-32.2.1-V002, November 15, 2019
|
||
|
-Initial Release for Jetpack 4.2.2/L4T 32.2.1
|
||
|
-Limited release for TX2, not including TX2i or TX2-4G
|
||
|
-new naming scheme
|
||
|
Version TX2-32.2.1-V003, November 20, 2019
|
||
|
-Adding TX2i support back in
|
||
|
Version TX2-32.2.1-V004, November 25, 2019
|
||
|
-Adding TX2-4G support back in
|
||
|
|
||
|
================================================================================
|
||
|
Contacting Connect Tech
|
||
|
================================================================================
|
||
|
If you have any problems, questions or suggestions regarding the
|
||
|
Board Support Package and hardware, please feel free to contact
|
||
|
Connect Tech Inc.
|
||
|
|
||
|
Connect Tech can be reached in a variety of ways:
|
||
|
|
||
|
TEL: 1 519 836 1291 or 1-800-426-8979 in North America
|
||
|
FAX: 1 519 836 4878
|
||
|
Email:
|
||
|
Sales: sales@connecttech.com
|
||
|
|
||
|
Tech Support: support@connecttech.com
|
||
|
|
||
|
Web: http://www.connecttech.com
|
||
|
|
||
|
Be sure to check the support section of our home page for answers to
|
||
|
technical questions at http://www.connecttech.com.
|
||
|
Also be sure to browse the knowledge data base.
|
||
|
If you don't find what you are looking for, please contact the
|
||
|
support department and let us know. We will be glad to help you.
|
||
|
================================================================================
|