px4-firmware/CMakeLists.txt

383 lines
13 KiB
CMake

############################################################################
#
# Copyright (c) 2015 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#=============================================================================
# CMAKE CODING STANDARD FOR PX4
#
# Structure
# ---------------------------------------------------------------------------
#
# * Common functions should be included in px_base.cmake.
#
# * OS/ board specific fucntions should be include in
# px_impl_${OS}.cmake or px4_impl_${OS}_${BOARD}.cmake.
#
# Formatting
# ---------------------------------------------------------------------------
#
# * Use hard indents to match the px4 source code.
#
# * All function and script arguments are upper case.
#
# * All local variables are lower case.
#
# * All cmake functions are lowercase.
#
# * For else, endif, endfunction, etc, never put the name of the statement
#
# Instead of the very confusing:
# if (${var} STREQUAL "1") <-- condition now becomes if name
# # do somthing
# elseif (${var} STREQUAL "2") <-- another condition
# # do somthing
# else (${var} STREQUAL "1") <-- tag is referring to name of if
# # do somthing
# endif (${var} STREQUAL "1") <-- tag is referring to name of if
#
# Do this:
# if (${var} STREQUAL "1") <-- condition now becomes if name
# # do somthing
# elseif (${var} STREQUAL "2") <-- another condition
# # do somthing
# else () <-- leave blank
# # do somthing
# endif () <-- leave blank
#
# Functions/Macros
# ---------------------------------------------------------------------------
#
# * Use px4_parse_function_args to parse functions and check for required
# arguments. Unless there is only one argument in the function and it is clear.
#
# * Never use macros. They allow overwriting global variables and this
# makes variable declarations hard to locate.
#
# * If a target from add_custom_* is set in a function, explicitly pass it
# as an output argument so that the target name is clear to the user.
#
# * Avoid use of global variables in functions. Functions in a nested
# scope may use global variables, but this makes it difficult to
# resuse functions.
#
# Included CMake Files
# ---------------------------------------------------------------------------
#
# * All variables in config files must have the prefix "config_".
#
# * Never set global variables in an included cmake file,
# you may only define functions. This excludes config and Toolchain files.
# This makes it clear to the user when variables are being set or targets
# are being created.
#
# * Setting a global variable in a CMakeLists.txt file is ok, because
# each CMakeLists.txt file has scope in the current directory and all
# subdirecties, so it is not truly global.
#
# * All toolchain files should be included in the cmake
# directory and named Toolchain-"name".cmake.
#
# Misc
# ---------------------------------------------------------------------------
#
# * If referencing a string variable, don't put it in quotes.
# Don't do "${OS}" STREQUAL "posix",
# instead type ${OS} STREQUAL "posix". This will throw an
# error when ${OS} is not defined instead of silently
# evaluating to false.
#
#=============================================================================
# Warning: Changing this modifies CMake's internal workings
# and leads to wrong toolchain detection
cmake_minimum_required(VERSION 2.8 FATAL_ERROR)
# Use clang
#SET (CMAKE_C_COMPILER /usr/bin/clang-3.6)
#SET (CMAKE_CXX_COMPILER /usr/bin/clang++-3.6)
#=============================================================================
# parameters
#
set(CMAKE_BUILD_TYPE "" CACHE STRING "build type")
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY
STRINGS ";Debug;Release;RelWithDebInfo;MinSizeRel")
set(CONFIG "nuttx_px4fmu-v2_default" CACHE STRING "desired configuration")
file(GLOB_RECURSE configs RELATIVE cmake/configs "cmake/configs/*.cmake")
set_property(CACHE CONFIG PROPERTY STRINGS ${configs})
set(THREADS "4" CACHE STRING
"number of threads to use for external build processes")
set(DEBUG_PORT "/dev/ttyACM0" CACHE STRING "debugging port")
#=============================================================================
# configuration
#
# must come before project to set toolchain
string(REPLACE "_" ";" config_args ${CONFIG})
list(GET config_args 0 OS)
list(GET config_args 1 BOARD)
list(GET config_args 2 LABEL)
set(target_name "${OS}-${BOARD}-${LABEL}")
message(STATUS "${target_name}")
# switch to ros CMake file if building ros
if (${OS} STREQUAL "ros")
include("cmake/ros-CMakeLists.txt")
else() # otherwise use the rest of this file
list(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
set(config_module "configs/${CONFIG}")
include(${config_module})
# cmake modules
include(ExternalProject)
# require px4 module interface
set(px4_required_interface
px4_os_prebuild_targets
px4_os_add_flags
)
foreach(cmd ${px4_required_interface})
if(NOT COMMAND ${cmd})
message(FATAL_ERROR "${config_module} must implement ${cmd}")
endif()
endforeach()
set(px4_required_config
config_module_list
)
foreach(conf ${px4_required_config})
if(NOT DEFINED ${conf})
message(FATAL_ERROR "cmake/${config_module} must define ${conf}")
endif()
endforeach()
# List the DriverFramework drivers
if(DEFINED config_df_driver_list)
message("DF Drivers: ${config_df_driver_list}")
endif()
#=============================================================================
# project definition
#
project(px4 CXX C ASM)
if (NOT ${CMAKE_VERSION} VERSION_LESS 3.0.0)
cmake_policy(SET CMP0045 NEW) # error on non-existent target in get prop
cmake_policy(SET CMP0046 NEW) # no non-existent targets as dependencies
cmake_policy(SET CMP0025 OLD) # still report AppleClang as Clang
endif()
if (NOT ${CMAKE_VERSION} VERSION_LESS 3.1.0)
cmake_policy(SET CMP0054 NEW) # don't dereference quoted variables
endif()
set(version_major 1)
set(version_minor 0)
set(version_patch 1)
set(version "${version_major}.${version_minor}.${version_patch}")
set(package-contact "px4users@googlegroups.com")
#=============================================================================
# programs
#
find_package(PythonInterp REQUIRED)
#=============================================================================
# cmake modules
#
enable_testing()
#=============================================================================
# check required toolchain variables
#
set(required_variables
CMAKE_C_COMPILER_ID
)
foreach(var ${required_variables})
if (NOT ${var})
message(FATAL_ERROR "Toolchain/config must define ${var}")
endif()
endforeach()
#=============================================================================
# git
#
px4_add_git_submodule(TARGET git_genmsg PATH "Tools/genmsg")
px4_add_git_submodule(TARGET git_gencpp PATH "Tools/gencpp")
px4_add_git_submodule(TARGET git_mavlink PATH "mavlink/include/mavlink/v1.0")
px4_add_git_submodule(TARGET git_gtest PATH "unittets/gtest")
px4_add_git_submodule(TARGET git_uavcan PATH "src/modules/uavcan/libuavcan")
px4_add_git_submodule(TARGET git_nuttx PATH "NuttX")
px4_add_git_submodule(TARGET git_driverframework PATH "src/lib/DriverFramework")
px4_add_git_submodule(TARGET git_ecl PATH "src/lib/ecl")
px4_add_git_submodule(TARGET git_jmavsim PATH "Tools/jMAVSim")
px4_add_git_submodule(TARGET git_gazebo PATH "Tools/sitl_gazebo")
px4_add_git_submodule(TARGET git_matrix PATH "src/lib/matrix")
px4_add_git_submodule(TARGET git_cmake_hexagon PATH "cmake/cmake_hexagon")
add_custom_target(submodule_clean
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
COMMAND git submodule deinit -f .
COMMAND rm -rf .git/modules/*
)
#=============================================================================
# misc targets
#
add_custom_target(check_format
COMMAND Tools/check_code_style.sh
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
)
add_custom_target(config
COMMAND cmake-gui .
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
#=============================================================================
# external libraries
#
px4_os_prebuild_targets(OUT prebuild_targets
BOARD ${BOARD}
THREADS ${THREADS})
#=============================================================================
# build flags
#
px4_os_add_flags(
BOARD ${BOARD}
C_FLAGS c_flags
CXX_FLAGS cxx_flags
EXE_LINKER_FLAGS exe_linker_flags
INCLUDE_DIRS include_dirs
LINK_DIRS link_dirs
DEFINITIONS definitions)
px4_join(OUT CMAKE_EXE_LINKER_FLAGS LIST "${exe_linker_flags}" GLUE " ")
px4_join(OUT CMAKE_C_FLAGS LIST "${c_flags}" GLUE " ")
px4_join(OUT CMAKE_CXX_FLAGS LIST "${cxx_flags}" GLUE " ")
include_directories(${include_dirs})
#message("INCLUDE_DIRS=${include_dirs}")
link_directories(${link_dirs})
add_definitions(${definitions})
#=============================================================================
# source code generation
#
add_subdirectory(msg)
px4_generate_messages(TARGET msg_gen
MSG_FILES ${msg_files}
OS ${OS}
DEPENDS git_genmsg git_gencpp prebuild_targets
)
px4_generate_parameters_xml(OUT parameters.xml BOARD ${BOARD})
px4_generate_airframes_xml(OUT airframes.xml BOARD ${BOARD})
add_custom_target(xml_gen
DEPENDS parameters.xml airframes.xml)
#=============================================================================
# external projects
#
set(ep_base ${CMAKE_BINARY_DIR}/external)
set_property(DIRECTORY PROPERTY EP_BASE ${ep_base})
# add external project install folders to build
link_directories(${ep_base}/Install/lib)
include_directories(${ep_base}/Install/include)
# add the directories so cmake won't warn
execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/lib)
execute_process(COMMAND cmake -E make_directory ${ep_base}/Install/include)
#=============================================================================
# DriverFramework Drivers
#
set(df_driver_libs)
foreach(driver ${config_df_driver_list})
add_subdirectory(src/lib/DriverFramework/drivers/${driver})
list(APPEND df_driver_libs df_${driver})
message("Adding DF driver: ${driver}")
endforeach()
#=============================================================================
# subdirectories
#
set(module_libraries)
foreach(module ${config_module_list})
string(REGEX MATCH "^[./]" external_module ${module})
if(external_module)
STRING(REGEX REPLACE "//" "/" EXT_MODULE ${module})
STRING(REGEX REPLACE "/" "__" EXT_MODULE_PREFIX ${EXT_MODULE})
add_subdirectory(${module} ${CMAKE_BINARY_DIR}/${EXT_MODULE_PREFIX})
else()
add_subdirectory(src/${module})
endif()
px4_mangle_name(${module} mangled_name)
list(APPEND module_libraries ${mangled_name})
#message(STATUS "adding module: ${module}")
endforeach()
# Keep track of external shared libs required for modules
set(module_external_libraries "${module_external_libraries}" CACHE INTERNAL "module_external_libraries")
add_subdirectory(src/firmware/${OS})
#add_dependencies(df_driver_framework nuttx_export_${CONFIG}.stamp)
if (NOT "${OS}" STREQUAL "nuttx")
endif()
if (config_io_board)
add_subdirectory(src/modules/px4iofirmware)
endif()
#=============================================================================
# generate git version
#
px4_create_git_hash_header(HEADER ${CMAKE_BINARY_DIR}/build_git_version.h)
#=============================================================================
# packaging
#
# Important to having packaging at end of cmake file.
#
set(CPACK_PACKAGE_VERSION ${version})
set(CPACK_PACKAGE_CONTACT ${package_contact})
set(CPACK_GENERATOR "ZIP")
set(CPACK_SOURCE_GENERATOR "ZIP")
include(CPack)
endif() # ros alternative endif
# vim: set noet fenc=utf-8 ff=unix ft=cmake :