px4-firmware/makefiles/config_aerocore_default.mk

127 lines
2.9 KiB
Makefile

#
# Makefile for the AeroCore *default* configuration
#
#
# Use the configuration's ROMFS.
#
ROMFS_ROOT = $(PX4_BASE)/ROMFS/px4fmu_common
#
# Board support modules
#
MODULES += drivers/device
MODULES += drivers/stm32
MODULES += drivers/stm32/adc
MODULES += drivers/stm32/tone_alarm
MODULES += drivers/led
MODULES += drivers/px4fmu
MODULES += drivers/boards/aerocore
MODULES += drivers/lsm303d
MODULES += drivers/l3gd20
MODULES += drivers/ms5611
MODULES += drivers/gps
MODULES += drivers/hil
MODULES += modules/sensors
#
# System commands
#
MODULES += systemcmds/ver
MODULES += systemcmds/mixer
MODULES += systemcmds/param
MODULES += systemcmds/perf
MODULES += systemcmds/pwm
MODULES += systemcmds/esc_calib
MODULES += systemcmds/reboot
MODULES += systemcmds/top
MODULES += systemcmds/config
MODULES += systemcmds/nshterm
MODULES += systemcmds/mtd
MODULES += systemcmds/dumpfile
#
# General system control
#
MODULES += modules/commander
MODULES += modules/navigator
MODULES += modules/mavlink
#
# Estimation modules (EKF / other filters)
#
# Too high RAM usage due to static allocations
#MODULES += modules/attitude_estimator_ekf
MODULES += modules/ekf_att_pos_estimator
MODULES += modules/attitude_estimator_q
MODULES += modules/position_estimator_inav
#
# Vehicle Control
#
MODULES += modules/fw_pos_control_l1
MODULES += modules/fw_att_control
MODULES += modules/mc_att_control
MODULES += modules/mc_pos_control
#
# Library modules
#
MODULES += modules/systemlib
MODULES += modules/systemlib/mixer
MODULES += modules/controllib
MODULES += modules/uORB
MODULES += modules/dataman
#
# Libraries
#
LIBRARIES += lib/mathlib/CMSIS
MODULES += lib/mathlib
MODULES += lib/mathlib/math/filter
MODULES += lib/ecl
MODULES += lib/external_lgpl
MODULES += lib/geo
MODULES += lib/geo_lookup
MODULES += lib/conversion
MODULES += lib/launchdetection
#
# Demo apps
#
#MODULES += examples/math_demo
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/hello_sky
MODULES += examples/px4_simple_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/daemon
#MODULES += examples/px4_daemon_app
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/debug_values
#MODULES += examples/px4_mavlink_debug
# Tutorial code from
# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
#MODULES += examples/fixedwing_control
# Hardware test
#MODULES += examples/hwtest
#
# Transitional support - add commands from the NuttX export archive.
#
# In general, these should move to modules over time.
#
# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
# to make the table a bit more readable.
#
define _B
$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
endef
BUILTIN_COMMANDS := \
$(call _B, hello, , 2048, hello_main) \
$(call _B, i2c, , 2048, i2c_main)